Date: Sat, 26 Jul 2014 14:24:00 -0400 From: Paul Mather <paul@gromit.dlib.vt.edu> To: YAMAMOTO Shigeru <shigeru@os-hackers.jp> Cc: freebsd-arm@freebsd.org Subject: Re: dmesg on RaspberryPi Type B+ Message-ID: <6201512C-2BD9-46D6-B093-317E5A2F0171@gromit.dlib.vt.edu> In-Reply-To: <20140726.130909.1154868204943313876.shigeru@os-hackers.jp> References: <20140726.130909.1154868204943313876.shigeru@os-hackers.jp>
next in thread | previous in thread | raw e-mail | index | archive | help
On Jul 26, 2014, at 12:09 AM, YAMAMOTO Shigeru <shigeru@os-hackers.jp> = wrote: >=20 > Hi, all, >=20 > I get a New RaspberryPi, RaspberryPi Type B+. >=20 > I make new SD image and I test it on RaspberryPi Type B+. > There is no problem. > My SD images is at = http://freebsd-current.os-hackers.jp/pub/FreeBSD/snapshots/20140725/raspbe= rry-pi/ >=20 > Next, I test newest SD image at > = http://ftp.freebsd.org/pub/FreeBSD/snapshots/arm/armv6/ISO-IMAGES/11.0/Fre= eBSD-11.0-CURRENT-arm-armv6-RPI-B-20140701-r268111.img.bz2. > It can't detect USB Ethernet device. As I understand it, the Raspberry Pi Model B+ has more USB ports and=20 uses a slightly different USB controller to the regular Model A and=20 Model B. I know Linux Raspberry Pi distributions have required updates=20= to run on the Model B+. I guess FreeBSD will need a tweak, too. Cheers, Paul. > It seems me to need change firmware to newer at, > https://github.com/raspberrypi/firmware >=20 > Thanks, > --- > YAMAMOTO Shigeru <shigeru@os-hackers.jp> > KDB: debugger backends: ddb > KDB: current backend: ddb > Copyright (c) 1992-2014 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, = 1994 > The Regents of the University of California. All rights = reserved. > FreeBSD is a registered trademark of The FreeBSD Foundation. > FreeBSD 11.0-CURRENT #0 r269079M: Fri Jul 25 13:39:57 JST 2014 > = root@nemesis.os-hackers.jp:/root/rpi/build/work/obj/arm.armv6/root/rpi/bui= ld/work/src/sys/RPI-B-VIMAGE arm > FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) = 20140512 > VT: init without driver. > CPU: ARM1176JZ-S rev 7 (ARM11J core) > Supported features: ARM_ISA THUMB2 JAZELLE ARMv4 Security_Ext > WB enabled LABT branch prediction enabled > 16KB/32B 4-way instruction cache > 16KB/32B 4-way write-back-locking-C data cache > real memory =3D 536866816 (511 MB) > avail memory =3D 498728960 (475 MB) > WARNING: VIMAGE (virtualized network stack) is a highly experimental = feature. > random: <Software, Yarrow> initialized > kbd0 at kbdmux0 > ofwbus0: <Open Firmware Device Tree> > simplebus0: <Flattened device tree simple bus> mem = 0x20000000-0x20ffffff on ofwbus0 > intc0: <BCM2835 Interrupt Controller> mem 0xb200-0xb3ff on simplebus0 > systimer0: <BCM2835 System Timer> mem 0x3000-0x3fff irq 8,9,10,11 on = simplebus0 > Event timer "BCM2835 Event Timer 3" frequency 1000000 Hz quality 1000 > Timecounter "BCM2835 Timecounter" frequency 1000000 Hz quality 1000 > bcmwd0: <BCM2708/2835 Watchdog> mem 0x10001c-0x100027 on simplebus0 > gpio0: <BCM2708/2835 GPIO controller> mem 0x200000-0x2000af irq = 57,59,58,60 on simplebus0 > gpio0: ACT LED at gpio0, pin 16 > gpio0: read-only pins: 46,47,48,49,50,51,52,53. > gpio0: reserved pins: 48,49,50,51,52,53. > gpioc0: <GPIO controller> on gpio0 > gpiobus0: <OFW GPIO bus> on gpio0 > gpioled0: <GPIO led> at pin(s) 16 on gpiobus0 > iichb0: <BCM2708/2835 BSC controller> mem 0x205000-0x20501f irq 61 on = simplebus0 > iicbus0: <OFW I2C bus> on iichb0 > iic0: <I2C generic I/O> on iicbus0 > iichb1: <BCM2708/2835 BSC controller> mem 0x804000-0x80401f irq 61 on = simplebus0 > iicbus1: <OFW I2C bus> on iichb1 > iic1: <I2C generic I/O> on iicbus1 > spi0: <BCM2708/2835 SPI controller> mem 0x204000-0x20401f irq 62 on = simplebus0 > spibus0: <OFW SPI bus> on spi0 > bcm_dma0: <BCM2835 DMA Controller> mem 0x7000-0x7fff,0xe05000-0xe05fff = irq 24,25,26,27,28,29,30,31,32,33,34,35,36 on simplebus0 > mbox0: <BCM2835 VideoCore Mailbox> mem 0xb880-0xb8bf irq 1 on = simplebus0 > sdhci_bcm0: <Broadcom 2708 SDHCI controller> mem 0x300000-0x3000ff irq = 70 on simplebus0 > mmc0: <MMC/SD bus> on sdhci_bcm0 > uart0: <PrimeCell UART (PL011)> mem 0x201000-0x201fff irq 65 on = simplebus0 > uart0: console (115200,n,8,1) > dwcotg0: <DWC OTG 2.0 integrated USB controller> mem 0x980000-0x99ffff = irq 17 on simplebus0 > usbus0 on dwcotg0 > fb0: <BCM2835 VT framebuffer driver> on ofwbus0 > simplebus1: <Flattened device tree simple bus> on ofwbus0 > simplebus1: could not get ranges > device_attach: simplebus1 attach returned 6 > Timecounters tick every 10.000 msec > usbus0: 480Mbps High Speed USB v2.0 > ugen0.1: <DWCOTG> at usbus0 > uhub0: <DWCOTG OTG Root HUB, class 9/0, rev 2.00/1.00, addr 1> on = usbus0 > uhub0: 1 port with 1 removable, self powered > ugen0.2: <vendor 0x0424> at usbus0 > uhub1: <vendor 0x0424 product 0x9514, class 9/0, rev 2.00/2.00, addr = 2> on usbus0 > uhub1: MTT enabled > mmcsd0: 2GB <SD 00000 1.0 SN 3420118712 MFG 05/2014 by 27 SM> at mmc0 = 25.0MHz/1bit/65535-block > fb0: 656x416(0x0@0,0) 16bpp > fb0: pitch 1312, base 0x5f005000, screen_size 545792 > fbd0 on fb0 > VT: initialize with new VT driver "fb". > random: unblocking device. > Root mount waiting for: usbus0 > uhub1: 5 ports with 4 removable, self powered > Root mount waiting for: usbus0 > ugen0.3: <vendor 0x0424> at usbus0 > smsc0: <vendor 0x0424 product 0xec00, rev 2.00/2.00, addr 3> on usbus0 > Trying to mount root from ufs:/dev/ufs/root20140725 [rw,noatime]... > smsc0: chip 0xec00, rev. 0002 > WARNING: / was not properly dismounted > miibus0: <MII bus> on smsc0 > ukphy0: <Generic IEEE 802.3u media interface> PHY 1 on miibus0 > ukphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > ue0: <USB Ethernet> on smsc0 > ue0: Ethernet address: b8:27:eb:50:ce:e0 > warning: no time-of-day clock registered, system time will not be set = accurately > gpio0: tern on ACT LED > smsc0: chip 0xec00, rev. 0002 > _______________________________________________ > freebsd-arm@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-arm > To unsubscribe, send any mail to "freebsd-arm-unsubscribe@freebsd.org"
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?6201512C-2BD9-46D6-B093-317E5A2F0171>