Date: Thu, 14 Sep 2000 10:32:36 -0700 (PDT) From: feisal@uwi.tt To: freebsd-gnats-submit@FreeBSD.org Subject: misc/21269: Install does not see disk on Advansys card Message-ID: <20000914173236.6A45037B424@hub.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 21269 >Category: misc >Synopsis: Install does not see disk on Advansys card >Confidential: no >Severity: critical >Priority: high >Responsible: freebsd-bugs >State: open >Quarter: >Keywords: >Date-Required: >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Thu Sep 14 10:40:01 PDT 2000 >Closed-Date: >Last-Modified: >Originator: Feisal Mohammed >Release: 4.1 >Organization: Uinversity of the West Indies >Environment: 3.4-RELEASE FreeBSD 3.4-RELEASE #2: Sat Jul 15 14:14:22 AST 2000 >Description: The system in question is running 3.4 and I am trying to upgrade to 4.1. All proceeds fine until I get to the partionion editor. I see one IDE disk but not the SCSI disk in the editor. This persists even if I select novice or custom install. The problem exists in 4.0-release and 4.1-release. I have attached a dmesg from the 3.4 system. =======dmesg======== Sep 9 13:27:59 feisalpc /kernel: FreeBSD 3.4-RELEASE #2: Sat Jul 15 14:14:22 AST 2000 Sep 9 13:28:00 feisalpc /kernel: root@feisalpc.eng.uwi.tt:/usr/src/sys/compile/NEW Sep 9 13:28:00 feisalpc /kernel: Timecounter "i8254" frequency 1193182 Hz Sep 9 13:28:00 feisalpc /kernel: Timecounter "TSC" frequency 120273337 Hz Sep 9 13:28:00 feisalpc /kernel: CPU: Pentium/P54C (120.27-MHz 586-class CPU) Sep 9 13:28:00 feisalpc /kernel: Origin = "GenuineIntel" Id = 0x526 Stepping = 6 Sep 9 13:28:00 feisalpc /kernel: Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8> Sep 9 13:28:00 feisalpc /kernel: real memory = 67108864 (65536K bytes) Sep 9 13:28:00 feisalpc /kernel: avail memory = 62951424 (61476K bytes) Sep 9 13:28:00 feisalpc /kernel: Probing for devices on PCI bus 0: Sep 9 13:28:00 feisalpc /kernel: chip0: <Intel 82439HX PCI cache memory controller> rev 0x03 on pci0.0.0 Sep 9 13:28:00 feisalpc /kernel: chip1: <Intel 82371SB PCI to ISA bridge> rev 0x01 on pci0.7.0 Sep 9 13:28:00 feisalpc /kernel: ide_pci0: <Intel PIIX3 Bus-master IDE controller> rev 0x00 on pci0.7.1 Sep 9 13:28:00 feisalpc /kernel: vga0: <S3 ViRGE VX graphics accelerator> rev 0x02 int a irq 9 on pci0.10.0 Sep 9 13:28:00 feisalpc /kernel: xl0: <3Com 3c905B-TX Fast Etherlink XL> rev 0x30 int a irq 9 on pci0.11.0 Sep 9 13:28:00 feisalpc /kernel: xl0: Ethernet address: 00:10:5a:0d:b8:1e Sep 9 13:28:00 feisalpc /kernel: xl0: autoneg complete, link status good (half-duplex, 10Mbps) Sep 9 13:28:00 feisalpc /kernel: adv0: <AdvanSys ASC3050 Ultra SCSI controller> rev 0x03 int a irq 12 on pci0.12.0 Sep 9 13:28:00 feisalpc /kernel: adv0: AdvanSys Ultra SCSI Host Adapter, SCSI ID 7, queue depth 240 Sep 9 13:28:00 feisalpc /kernel: Probing for devices on the ISA bus: Sep 9 13:28:00 feisalpc /kernel: sc0 on isa Sep 9 13:28:00 feisalpc /kernel: sc0: VGA color <16 virtual consoles, flags=0x0> Sep 9 13:28:00 feisalpc /kernel: atkbdc0 at 0x60-0x6f on motherboard Sep 9 13:28:00 feisalpc /kernel: atkbd0 irq 1 on isa Sep 9 13:28:00 feisalpc /kernel: sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa Sep 9 13:28:00 feisalpc /kernel: sio0: type 16550A Sep 9 13:28:00 feisalpc /kernel: sio1 at 0x2f8-0x2ff irq 3 flags 0x10 on isa Sep 9 13:28:00 feisalpc /kernel: sio1: type 16550A Sep 9 13:28:00 feisalpc /kernel: fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa Sep 9 13:28:00 feisalpc /kernel: fdc0: FIFO enabled, 8 bytes threshold Sep 9 13:28:00 feisalpc /kernel: fd0: 1.44MB 3.5in Sep 9 13:28:00 feisalpc /kernel: wdc0 at 0x1f0-0x1f7 irq 14 on isa Sep 9 13:28:00 feisalpc /kernel: wdc0: unit 0 (wd0): <QUANTUM BIGFOOT2550A> Sep 9 13:28:00 feisalpc /kernel: wd0: 2457MB (5033952 sectors), 4994 cyls, 16 heads, 63 S/T, 512 B/S Sep 9 13:28:00 feisalpc /kernel: wdc1 not found at 0x170 Sep 9 13:28:00 feisalpc /kernel: ppc0 at 0x378 irq 7 flags 0x40 on isa Sep 9 13:28:00 feisalpc /kernel: ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode Sep 9 13:28:00 feisalpc /kernel: lpt0: <generic printer> on ppbus 0 Sep 9 13:28:00 feisalpc /kernel: lpt0: Interrupt-driven port Sep 9 13:28:00 feisalpc /kernel: 1 3C5x9 board(s) on ISA found at 0x300 Sep 9 13:28:00 feisalpc /kernel: ep0 at 0x300-0x30f irq 10 on isa Sep 9 13:28:00 feisalpc /kernel: ep0: utp/bnc[*BNC*] address 00:60:08:40:56:af Sep 9 13:28:01 feisalpc /kernel: aic0 at 0x340-0x35f irq 11 on isa Sep 9 13:28:01 feisalpc /kernel: aic0: aic6360, dma, disconnection, parity check Sep 9 13:28:01 feisalpc /kernel: vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa Sep 9 13:28:01 feisalpc /kernel: npx0 on motherboard Sep 9 13:28:01 feisalpc /kernel: npx0: INT 16 interface Sep 9 13:28:01 feisalpc /kernel: Intel Pentium detected, installing workaround for F00F bug Sep 9 13:28:01 feisalpc /kernel: Waiting 15 seconds for SCSI devices to settle Sep 9 13:28:01 feisalpc /kernel: (sa0:aic0:0:4:0): found quirk entry 4 Sep 9 13:28:01 feisalpc /kernel: sa0 at aic0 bus 0 target 4 lun 0 Sep 9 13:28:01 feisalpc /kernel: sa0: <HP T4000s 1.10> Removable Sequential Access SCSI-2 device Sep 9 13:28:01 feisalpc /kernel: sa0: 3.300MB/s transfers Sep 9 13:28:01 feisalpc /kernel: cd0 at aic0 bus 0 target 3 lun 0 Sep 9 13:28:01 feisalpc /kernel: cd0: <PLEXTOR CD-ROM PX-12TS 1.01> Removable CD-ROM SCSI-2 device Sep 9 13:28:01 feisalpc /kernel: cd0: 5.000MB/s transfers (5.000MHz, offset 8) Sep 9 13:28:01 feisalpc /kernel: cd0: cd present [1318028 x 512 byte records] Sep 9 13:28:01 feisalpc /kernel: changing root device to da0s4a Sep 9 13:28:01 feisalpc /kernel: da0 at adv0 bus 0 target 6 lun 0 Sep 9 13:28:01 feisalpc /kernel: da0: <IBM DNES-309170 SA30> Fixed Direct Access SCSI-3 device Sep 9 13:28:01 feisalpc /kernel: da0: 20.000MB/s transfers (20.000MHz, offset 15), Tagged Queueing Enabled Sep 9 13:28:01 feisalpc /kernel: da0: 8748MB (17916240 512 byte sectors: 255H 63S/T 1115C) Sep 9 13:28:01 feisalpc /kernel: changing root device to da0a >How-To-Repeat: Try installing 4.1 or 4.0 on a disk on an Advansys controller >Fix: >Release-Note: >Audit-Trail: >Unformatted: To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-bugs" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20000914173236.6A45037B424>