Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 4 Apr 2003 16:47:53 -0800 (PST)
From:      Matt Wilbur <matt@efs.org>
To:        freebsd-alpha@freebsd.org
Subject:   Re: 4.7/4.8 problems w/AS800 and Qlogic ISP 1020/1040?
Message-ID:  <Pine.BSF.4.21.0304041646050.57204-100000@sargon.photon.com>
In-Reply-To: <Pine.BSF.4.21.0304041456400.57204-100000@sargon.photon.com>

next in thread | previous in thread | raw e-mail | index | archive | help
On Fri, 4 Apr 2003, Matt Wilbur wrote:
<stuff about problems>

Sorry, I forgot to include a full dmesg, unfortunately that's kind of
tough to do w/the newer kernels, here it is from 4.5-STABLE from 3/8/2002

Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 4.5-STABLE #0: Fri Mar  8 17:41:48 PST 2002
    root@donut.efs.org:/d1/usrsrc/sys/compile/GENERIC
AlphaServer 1000/1000A
AlphaServer 800 5/400, 400MHz
8192 byte page size, 1 processor.
CPU: EV56 (21164A) major=7 minor=2 extensions=0x1<BWX>
OSF PAL rev: 0x1000500020116
real memory  = 266289152 (260048K bytes)
avail memory = 252600320 (246680K bytes)
Preloaded elf kernel "kernel" at 0xfffffc00007bc000.
md0: Malloc disk
cia0: ALCOR/ALCOR2, pass 3
cia0: extended capabilities: 21<DWEN,BWEN>
pcib0: <2117x PCI host bus adapter> on cia0
pci0: <PCI bus> on pcib0
isp0: <Qlogic ISP 1020/1040 PCI SCSI Adapter> port 0x10000-0x100ff mem
0x8186000
0-0x81860fff irq 0 at device 5.0 on pci0
isp0: interrupting at CIA irq 0
isp0: invalid NVRAM header
pci0: <S3 Trio graphics accelerator> at 6.0 irq 9
isab0: <Intel 82375EB PCI-EISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
de0: <Digital 21140A Fast Ethernet> port 0x10100-0x1017f mem
0x81861000-0x818610
7f irq 1 at device 11.0 on pci0
de0: interrupting at CIA irq 1
de0: DEC DE500-AA 21140A [10-100Mb/s] pass 2.0
de0: address 00:00:f8:06:25:ce
de0: enabling 10baseT port
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: interrupting at ISA irq 6
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd0: interrupting at ISA irq 1
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
mcclock0: <MC146818A real time clock> at port 0x70-0x71 on isa0
sio0 at port 0x3f8-0x3ff irq 4 on isa0
sio0: type 16550A
sio0: interrupting at ISA irq 4
sio1: reserved for low-level i/o
ppc0: <Parallel port> at port 0x3bc-0x3bf irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
plip0: cannot reserve interrupt, failed.
lpt0: <Printer> on ppbus0
lpt0: Polled port
ppi0: <Parallel I/O> on ppbus0
ppc0: interrupting at ISA irq 7
Timecounter "alpha"  frequency 399998664 Hz
Waiting 15 seconds for SCSI devices to settle
sa0 at isp0 bus 0 target 3 lun 0
sa0: <DEC TLZ09     (C)DEC 0173> Removable Sequential Access SCSI-2 device 
sa0: 10.000MB/s transfers (10.000MHz, offset 12)
da1 at isp0 bus 0 target 1 lun 0
da1: <DEC RZ1CB-CA (C) DEC LYJ0> Fixed Direct Access SCSI-2 device 
da1: 20.000MB/s transfers (10.000MHz, offset 12, 16bit), Tagged Queueing
Enabled
da1: 4091MB (8380080 512 byte sectors: 255H 63S/T 521C)
da2 at isp0 bus 0 target 2 lun 0
da2: <DEC RZ1CB-CA (C) DEC LYJ0> Fixed Direct Access SCSI-2 device 
da2: 20.000MB/s transfers (10.000MHz, offset 12, 16bit), Tagged Queueing
Enabled
da2: 4091MB (8380080 512 byte sectors: 255H 63S/T 521C)
da0 at isp0 bus 0 target 0 lun 0
da0: <DEC RZ1BB-CS (C) DEC 0656> Fixed Direct Access SCSI-2 device 
da0: 20.000MB/s transfers (10.000MHz, offset 12, 16bit), Tagged Queueing
Enabled
da0: 2007MB (4110480 512 byte sectors: 255H 63S/T 255C)
Mounting root from ufs:/dev/da0a
cd0 at isp0 bus 0 target 4 lun 0
cd0: <DEC RRD46   (C) DEC 1337> Removable CD-ROM SCSI-2 device 
cd0: 10.000MB/s transfers (10.000MHz, offset 8)
cd0: Attempt to query device size failed: NOT READY, Medium not present

TIA!
Matt



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.21.0304041646050.57204-100000>