Date: Thu, 06 Jan 2005 15:06:20 +0100 From: Ronald Klop <ronald-freebsd8@klop.yi.org> To: freebsd-bluetooth@freebsd.org Subject: Fwd: ng_ubt with Broadcom BCM92035DGL Message-ID: <opsj6pguuv8527sy@smtp.local> In-Reply-To: <opsj6h4a0z8527sy@smtp.local> References: <opsj6h4a0z8527sy@smtp.local>
next in thread | previous in thread | raw e-mail | index | archive | help
--Boundary_(ID_U4TtL1uBOl/kJOoxcD4r+Q)
Content-type: text/plain; format=flowed; delsp=yes; charset=iso-8859-1
Content-transfer-encoding: 7BIT
Sorry, for the cross post, but I just found out about this list.
------- Forwarded message -------
From: "Ronald Klop" <ronald-freebsd8@klop.yi.org>
To: freebsd-stable@freebsd.org
Subject: ng_ubt with Broadcom BCM92035DGL
Date: Thu, 06 Jan 2005 12:27:36 +0100
Hello,
I have a USB Bluetooth adapter which probes fine as ubt0, but I get errors
when trying to use bluetooth.
Attached is my verbose dmesg output. I've read the handbook about
bluetooth and searched the internet for it.
The errors I get are these.
# /etc/rc.bluetooth start ubt0
Status: Command disallowed [0xc]
# /etc/rc.bluetooth start ubt0
Could not execute command "reset". Operation timed out
What information can I provide to resolve this. Or is there a better
mailinglist for this?
The usb-adapter is the shop-brand of the MyCom shops in The Netherlands.
Ronald.
--
Ronald Klop, Amsterdam, The Netherlands
--Boundary_(ID_U4TtL1uBOl/kJOoxcD4r+Q)
Content-type: text/plain; name=dmesg.txt
Content-transfer-encoding: 7BIT
Content-disposition: attachment; filename=dmesg.txt
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.3-STABLE #62: Tue Jan 4 00:33:21 CET 2005
root@guido.thuis.klop.ws:/usr/obj/usr/src/sys/LAPTOP
Preloaded elf kernel "/boot/kernel/kernel" at 0xc06dd000.
Preloaded elf module "/boot/kernel/linprocfs.ko" at 0xc06dd1a4.
Preloaded elf module "/boot/kernel/linux.ko" at 0xc06dd254.
Preloaded elf module "/boot/kernel/g_md.ko" at 0xc06dd300.
Preloaded elf module "/boot/kernel/if_tun.ko" at 0xc06dd3ac.
Preloaded elf module "/boot/kernel/if_ep.ko" at 0xc06dd458.
Preloaded elf module "/boot/kernel/elink.ko" at 0xc06dd504.
Preloaded elf module "/boot/kernel/snd_ess.ko" at 0xc06dd5b0.
Preloaded elf module "/boot/kernel/sound.ko" at 0xc06dd65c.
Preloaded elf module "/boot/kernel/snd_sbc.ko" at 0xc06dd708.
Preloaded elf module "/boot/kernel/mem.ko" at 0xc06dd7b4.
Preloaded elf module "/boot/kernel/io.ko" at 0xc06dd85c.
Calibrating clock(s) ... i8254 clock: 1193310 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 266677167 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (266.68-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x652 Stepping = 2
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 100622336 (95 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000826000 - 0x0000000005e15fff, 90112000 bytes (22000 pages)
avail memory = 93024256 (88 MB)
bios32: Found BIOS32 Service Directory header at 0xc00fa000
bios32: Entry = 0xf0000 (c00f0000) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0x474
pnpbios: Found PnP BIOS data at 0xc00fe2d0
pnpbios: Entry = f0000:4ef2 Rev = 1.0
pnpbios: Event flag at fe2f6
pnpbios: OEM ID b9b0110e
Other BIOS signatures found:
random: <entropy source, Software, Yarrow>
null: <null device, zero device>
mem: <memory>
Pentium Pro MTRR support enabled
io: <I/O>
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
pci_open(1): mode 1 addr port (0x0cf8) is 0x80000060
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=ae6c0e11)
pcibios: BIOS version 2.10
Found $PIR table, 7 entries at 0xc00f0990
PCI-Only Interrupts: 11
Location Bus Device Pin Link IRQs
embedded 0 0 A 0x0d 9 10 11
embedded 0 12 A 0x0c 9 10 11
embedded 0 14 A 0x01 9 10 11
embedded 0 16 A 0x19 9 10 11
embedded 0 16 B 0x19 9 10 11
embedded 0 10 A 0x18 9 10 11
slot 11 0 9 A 0x15 9 10 11
slot 11 0 9 B 0x14 9 10 11
slot 11 0 9 C 0x15 9 10 11
slot 11 0 9 D 0x14 9 10 11
slot 12 0 8 A 0x17 9 10 11
slot 12 0 8 B 0x16 9 10 11
slot 12 0 8 C 0x17 9 10 11
slot 12 0 8 D 0x16 9 10 11
apm0: <APM BIOS> on motherboard
apm0: found APM BIOS v1.2, connected at v1.2
pcib0: <Host to PCI bridge> pcibus 0 on motherboard
pir0: <PCI Interrupt Routing Table: 7 Entries> on motherboard
$PIR: Links after initial probe:
Link IRQ Rtd Ref IRQs
0xd 255 N 1 9 10 11
0xc 255 N 1 9 10 11
0x1 255 N 1 9 10 11
0x19 255 N 2 9 10 11
0x18 255 N 1 9 10 11
0x15 255 N 2 9 10 11
0x14 255 N 2 9 10 11
0x17 255 N 2 9 10 11
0x16 255 N 2 9 10 11
$PIR: Found matching pin for 0.12.INTA at func 0: 11
$PIR: Found matching pin for 0.14.INTA at func 1: 255
$PIR: Found matching pin for 0.14.INTA at func 2: 11
$PIR: Links after initial IRQ discovery:
Link IRQ Rtd Ref IRQs
0xd 255 N 1 9 10 11
0xc 11 Y 1 9 10 11
0x1 11 Y 1 9 10 11
0x19 255 N 2 9 10 11
0x18 255 N 1 9 10 11
0x15 255 N 2 9 10 11
0x14 255 N 2 9 10 11
0x17 255 N 2 9 10 11
0x16 255 N 2 9 10 11
$PIR: IRQs used by BIOS: 11
$PIR: Interrupt Weights:
[ 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 ]
[ 0 0 0 0 0 0 0 0 0 0 0 2 0 0 0 0 ]
pci0: <PCI bus> on pcib0
pci0: physical bus=0
map[10]: type 3, range 32, base 50000000, size 28, enabled
map[14]: type 1, range 32, base 44000000, size 12, enabled
found-> vendor=0x0e11, dev=0xae6c, revid=0x01
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x2280, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x0e11, dev=0xae6c, revid=0x01
bus=0, slot=0, func=1
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0003, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
map[10]: type 1, range 32, base 7fffe000, size 12, enabled
$PIR: 0:12 INTA routed to irq 11
found-> vendor=0x104c, dev=0xac16, revid=0x02
bus=0, slot=12, func=0
class=06-07-00, hdrtype=0x02, mfdev=1
cmdreg=0x0003, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x42 (1980 ns), mingnt=0xc0 (48000 ns), maxlat=0x03 (750 ns)
intpin=a, irq=11
powerspec 1 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base 7ffff000, size 12, enabled
$PIR: 0:12 INTA routed to irq 11
found-> vendor=0x104c, dev=0xac16, revid=0x02
bus=0, slot=12, func=1
class=06-07-00, hdrtype=0x02, mfdev=1
cmdreg=0x0003, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x42 (1980 ns), mingnt=0xc0 (48000 ns), maxlat=0x03 (750 ns)
intpin=a, irq=11
powerspec 1 supports D0 D1 D2 D3 current D0
found-> vendor=0x0e11, dev=0xae69, revid=0x03
bus=0, slot=14, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0047, statreg=0x2480, cachelnsz=8 (dwords)
lattimer=0x42 (1980 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 00001000, size 4, enabled
found-> vendor=0x0e11, dev=0xae33, revid=0x01
bus=0, slot=14, func=1
class=01-01-ea, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
powerspec 1 supports D0 D3 current D0
map[10]: type 1, range 32, base 44080000, size 12, enabled
$PIR: 0:14 INTA routed to irq 11
found-> vendor=0x0e11, dev=0xa0f8, revid=0x11
bus=0, slot=14, func=2
class=0c-03-10, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 1 supports D0 D3 current D0
pcib1: <PCI-PCI bridge> at device 0.1 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xf000-0xfff
pcib1: memory decode 0x40000000-0x43ffffff
pcib1: prefetched decode 0xfff00000-0xfffff
pci1: <PCI bus> on pcib1
pci1: physical bus=1
map[10]: type 1, range 32, base 40000000, size 26, enabled
pcib1: device (null) requested decoded memory range 0x40000000-0x43ffffff
found-> vendor=0x5333, dev=0x8c01, revid=0x06
bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0003, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x04 (1000 ns), maxlat=0xff (63750 ns)
pci1: <display, VGA> at device 0.0 (no driver attached)
cbb0: <TI1250 PCI-CardBus Bridge> mem 0x7fffe000-0x7fffefff irq 11 at device 12.0 on pci0
cbb0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0x7fffe000
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb0: [MPSAFE]
cbb0: PCI Configuration space:
0x00: 0xac16104c 0x02100007 0x06070002 0x00824208
0x10: 0x7fffe000 0x020000a0 0x20020200 0xfffff000
0x20: 0x00000000 0xfffff000 0x00000000 0x0000fffc
0x30: 0x00000000 0x0000fffc 0x00000000 0x0740010b
0x40: 0xb0480e11 0x00000001 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x2044b060 0x00000000 0x09898181 0x00000000
0x90: 0x60640280 0x00000000 0x00000000 0x00000000
0xa0: 0x7e210001 0x00800000 0x00000000 0x00000000
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
cbb1: <TI1250 PCI-CardBus Bridge> mem 0x7ffff000-0x7fffffff irq 11 at device 12.1 on pci0
cbb1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0x7ffff000
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
cbb1: [MPSAFE]
cbb1: PCI Configuration space:
0x00: 0xac16104c 0x02100007 0x06070002 0x00824208
0x10: 0x7ffff000 0x020000a0 0x20030300 0xfffff000
0x20: 0x00000000 0xfffff000 0x00000000 0x0000fffc
0x30: 0x00000000 0x0000fffc 0x00000000 0x0740010b
0x40: 0xb0480e11 0x00000001 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x20449060 0x00000000 0x09898181 0x00000000
0x90: 0x60640280 0x00000000 0x00000000 0x00000000
0xa0: 0x7e210001 0x00800000 0x00000000 0x00000000
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
isab0: <PCI-ISA bridge> at device 14.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <GENERIC ATA controller> port 0x1000-0x100f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 14.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x1000
ata0: channel #0 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=01 ostat0=50 ostat1=ff
ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata0: [MPSAFE]
ata1: channel #1 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=00 ostat0=ff ostat1=ff
ata1: [MPSAFE]
pci0: <serial bus, USB> at device 14.2 (no driver attached)
cpu0 on motherboard
pnpbios: 18 devices, largest 250 bytes
PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0
PNP0c04: adding irq mask 0x2000
pnpbios: handle 1 device ID PNP0c04 (040cd041)
PNP0c01: adding fixed memory32 range 0-0x9ffff, size=0xa0000
PNP0c01: adding fixed memory32 range 0xf0000-0xfffff, size=0x10000
PNP0c01: adding fixed memory32 range 0x100000-0x5ffffff, size=0x5f00000
pnpbios: handle 2 device ID PNP0c01 (010cd041)
PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0
pnpbios: handle 3 device ID PNP0a03 (030ad041)
PNP0200: adding io range 0-0xf, size=0x10, align=0
PNP0200: adding io range 0x80-0x8f, size=0x10, align=0
PNP0200: adding io range 0xc0-0xdf, size=0x20, align=0
PNP0200: adding dma mask 0x10
pnpbios: handle 5 device ID PNP0200 (0002d041)
PNP0100: adding io range 0x40-0x43, size=0x4, align=0
PNP0100: adding irq mask 0x1
pnpbios: handle 6 device ID PNP0100 (0001d041)
PNP0800: adding io range 0x61-0x61, size=0x1, align=0
pnpbios: handle 7 device ID PNP0800 (0008d041)
PNP0b00: adding io range 0x70-0x71, size=0x2, align=0
PNP0b00: adding io range 0x74-0x74, size=0x1, align=0
PNP0b00: adding io range 0x76-0x76, size=0x1, align=0
PNP0b00: adding irq mask 0x100
pnpbios: handle 8 device ID PNP0b00 (000bd041)
PNP0303: adding io range 0x60-0x60, size=0x1, align=0
PNP0303: adding io range 0x64-0x64, size=0x1, align=0
PNP0303: adding irq mask 0x2
pnpbios: handle 9 device ID PNP0303 (0303d041)
PNP0f13: adding irq mask 0x1000
pnpbios: handle 10 device ID PNP0f13 (130fd041)
PNP0700: adding irq mask 0x40
PNP0700: adding dma mask 0x4
PNP0700: adding io range 0x3f0-0x3f5, size=0x6, align=0
pnpbios: handle 11 device ID PNP0700 (0007d041)
PNP0401: adding irq mask 0x80
PNP0401: adding dma mask 0x8
PNP0401: adding io range 0x378-0x37f, size=0x8, align=0
PNP0401: adding io range 0x778-0x77a, size=0x3, align=0
pnpbios: handle 12 device ID PNP0401 (0104d041)
PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0
PNP0501: adding irq mask 0x10
pnpbios: handle 13 device ID PNP0501 (0105d041)
pnpbios: handle 14 device ID SMCf010 (10f0a34d)
PNP0e03: adding io range 0x3e0-0x3e1, size=0x2, align=0
pnpbios: handle 15 device ID PNP0e03 (030ed041)
ESS0009: adding io range 0x250-0x257, size=0x8, align=0
pnpbios: handle 16 device ID ESS0009 (09007316)
ESS1879: adding io range 0x220-0x22f, size=0x10, align=0
ESS1879: adding io range 0x388-0x38b, size=0x4, align=0
ESS1879: adding io range 0x330-0x331, size=0x2, align=0
ESS1879: adding irq mask 0x20
ESS1879: adding dma mask 0x2
ESS1879: adding dma mask 0x1
pnpbios: handle 17 device ID ESS1879 (79187316)
PNP0c02: adding fixed memory32 range 0xfffc0000-0xffffffff, size=0x40000
PNP0c02: adding fixed memory32 range 0xcc000-0xcffff, size=0x4000
PNP0c02: adding io range 0x10-0x1f, size=0x10, align=0
PNP0c02: adding io range 0x44-0x47, size=0x4, align=0
PNP0c02: adding io range 0x92-0x92, size=0x1, align=0
PNP0c02: adding io range 0xe0-0xef, size=0x10, align=0
PNP0c02: adding io range 0xbc-0xbf, size=0x4, align=0
PNP0c02: adding io range 0x130-0x131, size=0x2, align=0
PNP0c02: adding io range 0x134-0x137, size=0x4, align=0
PNP0c02: adding io range 0x270-0x271, size=0x2, align=0
PNP0c02: adding io range 0x260-0x261, size=0x2, align=0
PNP0c02: adding io range 0x2a0-0x2a0, size=0x1, align=0
PNP0c02: adding io range 0x370-0x371, size=0x2, align=0
PNP0c02: adding io range 0x374-0x374, size=0x1, align=0
PNP0c02: adding io range 0x400-0x47f, size=0x80, align=0
PNP0c02: adding io range 0x480-0x4ff, size=0x80, align=0
PNP0c02: adding io range 0xcf7-0xcf7, size=0x1, align=0
PNP0c02: adding io range 0xc48-0xc48, size=0x1, align=0
PNP0c02: adding io range 0xc4a-0xc4a, size=0x1, align=0
PNP0c02: adding io range 0xc6c-0xc6d, size=0x2, align=0
PNP0c02: adding io range 0x800-0x87f, size=0x80, align=0
PNP0c02: adding io range 0xc1f-0xc20, size=0x2, align=0
PNP0c02: adding io range 0xc80-0xc9f, size=0x20, align=0
pnpbios: handle 19 device ID PNP0c02 (020cd041)
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0 on isa0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
psm0: current command byte:0065
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3-00, 3 buttons
psm0: config:00000000, flags:00000008, packet size:4
psm0: syncmask:08, syncbits:00
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0: ic_type 90 part_id 80
fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: ic_type 90 part_id 80
fdc0: [MPSAFE]
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: EPP SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
ppi0: <Parallel I/O> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
sio0: irq maps: 0x1 0x11 0x1 0x1
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0x1 0x1 0x1 0x1
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
unknown: <PNP0800> failed to probe at port 0x61 on isa0
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0303> at port 0x60 on isa0
unknown: <PNP0f13> can't assign resources (irq)
unknown: <PNP0f13> at irq 12 on isa0
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0700> at port 0x3f0-0x3f5 on isa0
unknown: <PNP0401> can't assign resources (port)
unknown: <PNP0401> at port 0x378-0x37f on isa0
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0501> at port 0x3f8-0x3ff on isa0
unknown: <SMCf010> failed to probe on isa0
unknown: <PNP0e03> failed to probe at port 0x3e0-0x3e1 on isa0
unknown: <ESS0009> failed to probe at port 0x250-0x257 on isa0
sbc0: <ESS ES1879> at port 0x330-0x331,0x388-0x38b,0x220-0x22f irq 5 drq 0,1 on isa0
sbc0: [GIANT-LOCKED]
pcm0: <ESS 18xx DSP> on sbc0
pcm0: ESS1879 detected, newspeed
pcm0: [GIANT-LOCKED]
pcm0: sndbuf_setmap ff4000, 1000; 0xc699c000 -> ff4000
pcm0: sndbuf_setmap ff3000, 1000; 0xc699d000 -> ff3000
Device configuration finished.
procfs registered
linprocfs registered
TSC timecounter disabled: APM enabled.
Timecounter "TSC" frequency 266677167 Hz quality -1000
Timecounters tick every 4.000 msec
Linux ELF exec handler installed
lo0: bpf attached
ipfw2 initialized, divert enabled, rule-based forwarding disabled, default to deny, logging unlimited
ata0-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin
ad0: <FUJITSU MHN2100AT/7256> ATA-5 disk at ata0-master
ad0: 9590MB (19640880 sectors), 19485 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, PIO4
pccard0: CIS version PC Card Standard 5.0
pccard0: CIS info: , IEEE 802.11 Wireless LAN/PC Card,
pccard0: Manufacturer code 0xd601, product 0x2
pccard0: function 0: network adapter, ccr addr 3e0 mask 1
pccard0: function 0, config table entry 1: I/O card; irq mask ffff; iomask 6, iospace 0-3f; io16 irqpulse irqlevel
pccard0: <unknown card> (manufacturer=0xd601, product=0x0002) at function 0
pccard0: CIS info: , IEEE 802.11 Wireless LAN/PC Card,
GEOM: new disk ad0
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/15/63 s:63 l:19640817
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad0s1, start 32256 length 10056098304 end 10056130559
GEOM: Configure ad0s1a, start 0 length 268435456 end 268435455
GEOM: Configure ad0s1b, start 268435456 length 185606144 end 454041599
GEOM: Configure ad0s1c, start 0 length 10056098304 end 10056098303
GEOM: Configure ad0s1d, start 454041600 length 268435456 end 722477055
GEOM: Configure ad0s1e, start 722477056 length 268435456 end 990912511
GEOM: Configure ad0s1f, start 990912512 length 9065185792 end 10056098303
Mounting root from ufs:/dev/ad0s1a
start_init: trying /sbin/init
wlan: <802.11 Link Layer>
wi0: < IEEE 802.11 Wireless LAN/PC Card> at port 0x180-0x1bf irq 11 function 0 config 1 on pccard0
wi0: [MPSAFE]
wi0: using RF:PRISM2 MAC:HFA3841 CARD:HWB3163 rev.A
wi0: Intersil Firmware: Primary (0.3.0), Station (0.8.3)
wi0: bpf attached
wi0: Ethernet address: 00:60:b3:71:86:1c
wi0: bpf attached
wi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
wi0: bpf attached
pci0: driver added
found-> vendor=0x0e11, dev=0xa0f8, revid=0x11
bus=0, slot=14, func=2
class=0c-03-10, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 1 supports D0 D3 current D0
pci0:14:2: reprobing on driver added
pci0:14:2: Transition from D0 to D3
pci1: driver added
found-> vendor=0x5333, dev=0x8c01, revid=0x06
bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0003, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x04 (1000 ns), maxlat=0xff (63750 ns)
pci1:0:0: reprobing on driver added
tun1: bpf attached
pci0: driver added
found-> vendor=0x0e11, dev=0xa0f8, revid=0x11
bus=0, slot=14, func=2
class=0c-03-10, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 1 supports D0 D3 current D3
pci0:14:2: reprobing on driver added
pci0:14:2: Transition from D3 to D0
pci0:14:2: Transition from D0 to D3
pci1: driver added
found-> vendor=0x5333, dev=0x8c01, revid=0x06
bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0003, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x04 (1000 ns), maxlat=0xff (63750 ns)
pci1:0:0: reprobing on driver added
pci0: driver added
found-> vendor=0x0e11, dev=0xa0f8, revid=0x11
bus=0, slot=14, func=2
class=0c-03-10, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 1 supports D0 D3 current D3
pci0:14:2: reprobing on driver added
pci0:14:2: Transition from D3 to D0
ohci0: <OHCI (generic) USB controller> mem 0x44080000-0x44080fff irq 11 at device 14.2 on pci0
ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0x44080000
ohci0: (New OHCI DeviceId=0xa0f80e11)
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: (0x0e11) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci1: driver added
found-> vendor=0x5333, dev=0x8c01, revid=0x06
bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0003, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x04 (1000 ns), maxlat=0xff (63750 ns)
pci1:0:0: reprobing on driver added
pci0: driver added
pci1: driver added
found-> vendor=0x5333, dev=0x8c01, revid=0x06
bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0003, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x04 (1000 ns), maxlat=0xff (63750 ns)
pci1:0:0: reprobing on driver added
uhub1: Broadcom product 0x3535, class 9/0, rev 2.00/1.00, addr 2
uhub1: 3 ports with 0 removable, bus powered
ubt0: Broadcom BCM92035DGL, rev 1.10/1.00, addr 3
ubt0: Broadcom BCM92035DGL, rev 1.10/1.00, addr 3
ubt0: Interface 0 endpoints: interrupt=0x81, bulk-in=0x82, bulk-out=0x2
ubt0: Interface 1 (alt.config 4) endpoints: isoc-in=0x83, isoc-out=0x3; wMaxPacketSize=64; nframes=5, buffer size=320
--Boundary_(ID_U4TtL1uBOl/kJOoxcD4r+Q)--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?opsj6pguuv8527sy>