Date: Mon, 21 Nov 2011 21:47:32 +0000 From: Alexander Best <arundel@freebsd.org> To: Warren Block <wblock@wonkity.com> Cc: freebsd-wireless@freebsd.org Subject: Re: issues with the recent ath commits (r227740, r227651, ...) Message-ID: <20111121214732.GA8566@freebsd.org> In-Reply-To: <alpine.BSF.2.00.1111211433100.33629@wonkity.com> References: <20111121131730.GA3599@freebsd.org> <alpine.BSF.2.00.1111210719430.30516@wonkity.com> <20111121152054.GA22220@freebsd.org> <CAJ-VmomzY6Arh_=nPihdH=RhNyQXV7jgdvV7oyGKfqzb1BQ6sw@mail.gmail.com> <alpine.BSF.2.00.1111211433100.33629@wonkity.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Mon Nov 21 11, Warren Block wrote: > On Tue, 22 Nov 2011, Adrian Chadd wrote: > > >Warren, can you please verify that reverting back to r227650 fixes it for > >you? > > Just trying it now, for some reason this HP Pentium D system is > dog-slow. Nothing to do with the wireless, though. > > Anyway, so far so good. It has already stayed up longer than it would > before, and big network transfers haven't been a problem. > > Note that this is 11g, I haven't even attempted to look up the > instructions to enable the 11n support yet. this is my 'ifconfig'-output btw: ath0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 2290 ether XX:XX:XX:XX:XX:XX media: IEEE 802.11 Wireless Ethernet autoselect mode 11g status: associated lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384 options=3<RXCSUM,TXCSUM> inet 127.0.0.1 netmask 0xff000000 wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 ether XX:XX:XX:XX:XX:XX inet 192.168.1.10 netmask 0xffffff00 broadcast 192.168.1.255 inet 192.168.1.20 netmask 0xffffff00 broadcast 192.168.1.255 media: IEEE 802.11 Wireless Ethernet OFDM/36Mbps mode 11g status: associated ssid XXXXXXXXX channel 6 (2437 MHz 11g) bssid XX:XX:XX:XX:XX:XX regdomain ETSI country DE ecm authmode WPA2/802.11i privacy ON deftxkey UNDEF TKIP 2:128-bit TKIP 3:128-bit txpower 30 bmiss 7 scanvalid 450 bgscan bgscanintvl 300 bgscanidle 250 roam:rssi 7 roam:rate 5 protmode CTS wme burst roaming MANUAL ... my card doesn't support 11n. cheers. alex
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20111121214732.GA8566>