Date: Thu, 7 Jan 2010 10:45:16 -0800 From: Weongyo Jeong <weongyo.jeong@gmail.com> To: Steven Friedrich <freebsd@insightbb.com> Cc: freebsd-net@freebsd.org Subject: Re: uath under FreeBSD 8.0-STABLE Message-ID: <20100107184516.GP1491@weongyo> In-Reply-To: <201001071133.22131.freebsd@insightbb.com> References: <201001061244.46700.freebsd@insightbb.com> <20100107033443.GK1491@weongyo> <201001071133.22131.freebsd@insightbb.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Thu, Jan 07, 2010 at 11:33:21AM -0500, Steven Friedrich wrote:
> On Wednesday 06 January 2010 10:34:43 pm Weongyo Jeong wrote:
> > On Wed, Jan 06, 2010 at 12:44:46PM -0500, Steven Friedrich wrote:
> > > On Monday 04 January 2010 05:31:18 pm Weongyo Jeong wrote:
> > > > On Mon, Jan 04, 2010 at 03:57:56PM -0500, Steven Friedrich wrote:
> > > > > On Monday 04 January 2010 03:34:41 pm Weongyo Jeong wrote:
> > > > > > Could you please test with attached patch? Today the device I
> > > > > > ordered is delivered and I tried to test with it. One thing, it
> > > > > > looks weird, I noticed is that after uploading the firmware,
> > > > > > idProduct is increased not decreased.
> > > > > >
> > > > > > After patching, you should rebuild the module.
> > > > >
> > > > > I didn't get an attachment...
> > > >
> > > > Attached.
> > > >
> > > > regards,
> > > > Weongyo Jeong
> > >
> > > I had to place:
> > > # Firmware download for Netgear WG111T USB ethernet.
> > > attach 100 {
> > > match "vendor" "0x1385";
> > > match "product" "0x4251";
> > > action "/usr/sbin/uathload -d /dev/$device-name";
> > > };
> > >
> > > in /etc/devd.conf, but I later moved it to
> > > /usr/local/etc/devd/WG111T.conf
> > >
> > > Then it appeared in the ifconfig as uath0.
> > >
> > > But I get errors later when I run wpa_supplicant -B -i wlan0 -c
> > > /etc/wpa_supplicant.conf
> > >
> > > Those errors are:
> > > uath0: timeout waiting for reply to cmd 0x8 (8)
> > > uath0: could not start target, error 35
> > >
> > > Your patch DOES work, AFAIK.
> >
> > I tested WPA test with my device today and it worked. Could you please
> > show me your wpa_supplicant.conf and commands? The following is my
> > configuration and command.
> >
> > # cat /etc/wpa_supplicant.conf
> > ctrl_interface=/var/run/wpa_supplicant
> > ctrl_interface_group=wheel
> >
> > network={
> > ssid="wg"
> > bssid=00:08:XX:XX:XX:15
> > proto=WPA
> > key_mgmt=WPA-PSK
> > pairwise=TKIP
> > group=TKIP
> > scan_ssid=1
> > psk="XXXXXXXXXX"
> > }
> >
> > # uathload -d /dev/ugen1.2
> > ugen1.2: <Atheros Communications Inc> at usbus1 (disconnected)
> > ugen1.2: <Athero Communications Inc> at usbus1
> > uath0: <Atheros Communications Inc WG111T, rev 2.00/0.01, addr 2> on
> > usbus1
> > # ifconfig wlan0 create wlandev uath0
> > wlan0: Ethernet address: 00:1b:2f:XX:XX:ca
> > <s/modules/usb/uath]# wpa_supplicant -i wlan0 -c
> > /etc/wpa_supplicant.conf CTRL-EVENT-SCAN-RESULTS
> > Trying to associate with 00:08:XX:XX:XX:14 (SSID='wg' freq=2437 MHz)
> > Associated with 00:08:XX:XX:XX:14
> > WPA: Key negotiation completed with 00:08:XX:XX:XX:14 [PTK=TKIP
> > GTK=TKIP]
> > CTRL-EVENT-CONNECTED - Connection to 00:08:XX:XX:XX:14 completed (auth)
> > [id=0 id_str=]
>
> Here's my /etc/wpa_supplicant.conf
> # ap_scan should be 2 when using ndis (bcmwl5_sys) driver,
> # 1 when using bwi, uath
> ap_scan=1
> network={
> bssid=00:xx:xx:xx:xx:50
> ssid="FriedrichAir"
> scan_ssid=1
> key_mgmt=WPA-PSK
> pairwise=TKIP
> group=TKIP
> proto=WPA WPA2
> psk="xxxxxxxxxxxxxxxx"
> }
It looks weird for me that with you configuration my device is worked
without problems. Could you please do wireless association test without
any authentication (like WPA, WEP)?
I think we should check it first before associating with WPA.
regards,
Weongyo Jeong
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20100107184516.GP1491>