Date: Fri, 23 Jan 2004 14:26:06 -0600 From: Michael Clark <MClark@Nemschoff.com> To: "'freebsd-questions@FreeBSD.ORG'" <freebsd-questions@FreeBSD.ORG> Subject: 5.2 cvsup make buildworld error Message-ID: <A2A28DB6D52E084783ACD6E6C6F5D790B43E04@EMAILSERVER2.nemschoff.com>
next in thread | raw e-mail | index | archive | help
Sry if this double post I used the wrong address the first time.
This is the second computer I have had problems upgrade from 5.1 to 5.2 on.
The first computer I had to format as it died during installworld and I was
unable to boot it.
This computer died on make installworld as well. After that I was unable to
use any basic commands, ls, ext.
Rebooted and it started up, and continues to run, but sendmail is dumping
constantly and I am unable to upgrade it to 5.2...
Any help would be greatly appreciated I am at a loss as to what to do with
this one.
Michael Clark
Nemschoff Chairs Inc
mclark at nemschoff dot com
--------------------------------------------------------------
>>> stage 1.1: legacy release compatibility shims
--------------------------------------------------------------
cd /usr/src; MAKEOBJDIRPREFIX=/usr/obj/usr/src/i386 DESTDIR= INSTALL="sh
/usr/src/tools/install.sh"
PATH=/usr/obj/usr/src/i386/legacy/usr/sbin:/usr/obj/usr/src/i386/legacy/usr/
bin:/usr/obj/usr/src/i386/legacy/usr/games:/sbin:/bin:/usr/sbin:/usr/bin
WORLDTMP=/usr/obj/usr/src/i386 MAKEFLAGS="-m /usr/src/tools/build/mk -m
/usr/src/share/mk" /usr/obj/usr/src/make.i386/make -f Makefile.inc1
BOOTSTRAPPING=502000 -DNOHTML -DNOINFO -DNOLINT -DNOMAN -DNOPIC -DNOPROFILE
-DNOSHARED -DNO_CPU_CFLAGS -DNO_WARNS legacy
===> tools/build
/usr/obj/usr/src/i386/usr/src/tools/build created for /usr/src/tools/build
cd /usr/src/tools/build; /usr/obj/usr/src/make.i386/make buildincludes;
/usr/obj/usr/src/make.i386/make installincludes
rm -f .depend
mkdep -f .depend -a -I/usr/obj/usr/src/i386/legacy/usr/include
/usr/src/tools/build/dummy.c
cc -O -pipe -I/usr/obj/usr/src/i386/legacy/usr/include -c
/usr/src/tools/build/dummy.c
building static egacy library
ranlib libegacy.a
sh /usr/src/tools/install.sh -C -o root -g wheel -m 444 libegacy.a
/usr/obj/usr/src/i386/legacy/usr/lib
*** Signal 11
Stop in /usr/src/tools/build.
*** Error code 1
Stop in /usr/src.
*** Error code 1
Stop in /usr/src.
*** Error code 1
Stop in /usr/src.
bash-2.05b#
----------------------------------------dmesg-------------------------------
-----------------
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.2-RELEASE #1: Thu Jan 15 14:42:57 CST 2004
root@monitor.nemschoff.com:/usr/obj/usr/src/sys/MONITOR
Preloaded elf kernel "/boot/kernel/kernel" at 0xc096e000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc096e1cc.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel Pentium III (601.37-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x681 Stepping = 1
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,
PAT,PSE36,MMX,FXSR,SSE>
real memory = 268419072 (255 MB)
avail memory = 251092992 (239 MB)
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <ASUS P3B_F > on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 8 entries at 0xc00f0e70
acpi0: Power Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib0: slot 4 INTD is routed to irq 10
pcib0: slot 9 INTA is routed to irq 10
pcib0: slot 10 INTA is routed to irq 11
agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0xe4000000-0xe7ffffff
at device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 4.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port 0xb800-0xb80f at device 4.1 on
pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xb400-0xb41f irq 10
at device 4.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <bridge, PCI-unknown> at device 4.3 (no driver attached)
fxp0: <Intel 82551 Pro/100 Ethernet> port 0xb000-0xb03f mem
0xe1800000-0xe181ffff,0xe2000000-0xe2000fff irq 10 at devic
9.0 on pci0
fxp0: Ethernet address
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp1: <Intel 82551 Pro/100 Ethernet> port 0xa800-0xa83f mem
0xe0800000-0xe081ffff,0xe1000000-0xe1000fff irq 11 at devic
10.0 on pci0
fxp1: Ethernet address
miibus1: <MII bus> on fxp1
inphy1: <i82555 10/100 media interface> on miibus1
inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port
0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0 port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
orm0: <Option ROMs> at iomem 0xcc000-0xcd7ff,0xc8000-0xc97ff,0xc0000-0xc7fff
on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 601365443 Hz quality 800
Timecounters tick every 10.000 msec
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
GEOM: create disk ad0 dp=0xc2e12260
ad0: 38166MB <WDC WD400JB-00ENA0> [77545/16/63] at ata0-master UDMA33
acd0: CDROM <50X CD-ROM> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s1a
pid 419 (sendmail), uid 0: exited on signal 11
pid 538 (bandwidthd), uid 0: exited on signal 6 (core dumped)
fxp0: promiscuous mode enabled
fxp0: promiscuous mode disabled
fxp0: promiscuous mode enabled
pid 2469 (sendmail), uid 1002: exited on signal 11
pid 11197 (sendmail), uid 1003: exited on signal 11
pid 11417 (sendmail), uid 1003: exited on signal 11
pid 15248 (sendmail), uid 1003: exited on signal 11
fxp0: promiscuous mode disabled
fxp0: promiscuous mode enabled
pid 21924 (sendmail), uid 1003: exited on signal 11
fxp0: promiscuous mode disabled
fxp0: promiscuous mode enabled
fxp0: promiscuous mode disabled
fxp0: promiscuous mode enabled
fxp0: promiscuous mode disabled
fxp0: promiscuous mode enabled
pid 40591 (sendmail), uid 1003: exited on signal 11
pid 40819 (sendmail), uid 1003: exited on signal 11
pid 42009 (sendmail), uid 1003: exited on signal 11
fxp0: promiscuous mode disabled
fxp0: promiscuous mode enabled
pid 48577 (sendmail), uid 1003: exited on signal 11
Michael Clark
Nemschoff Chairs Inc
mclark at nemschoff dot com
CompTIA A+, MCP
Voice: (920) 457 7726 x294
Fax: (920) 453 6594
CONFIDENTIALITY NOTE: This electronic transmission, including all
attachments, is directed in confidence solely to the person(s) to whom it is
addressed, or an authorized recipient, and may not otherwise be distributed,
copied or disclosed. The contents of the transmission may also be subject to
intellectual property rights and all such rights are expressly claimed and
are not waived. If you have received this transmission in error, please
notify the sender immediately by return electronic transmission and then
immediately delete this transmission, including all attachments, without
copying, distributing or disclosing same.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?A2A28DB6D52E084783ACD6E6C6F5D790B43E04>