Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 24 Dec 2001 09:49:23 -0800
From:      "Peter Ong" <peter@haloflightleader.net>
To:        <freebsd-hardware@FreeBSD.ORG>, <freebsd-stable@FreeBSD.ORG>
Subject:   Cabletron E22xx DNI (ISA)
Message-ID:  <000c01c18ca3$5343e180$0101a8c0@haloflightleader.net>

next in thread | raw e-mail | index | archive | help

[-- Attachment #1 --]
Hello,

I posted this stuff before, but I really need some help.  Thanks in advance.

There are txt files attached (to those using Windex, open these with
Wordpad -- these were written directly from the FBSD box.):

e22_test.txt is the output from the configuration utility of the
manufacturer of the NIC.

dmesg.1.txt shows my initial configuration going with controller 1's config.

kernel.conf.1.txt is the result.

The set of #2s are going with the next setting, the same with #3.  Notice on
all sets of kernel.conf's, they all say "Unknown: can't assign resource."
... to my nic.

Can someone please help.  Desperate.  I've taken a shower since my last
post, so I don't smell so bad, but I still have a killer cold.

Have a Merry Christmas to all of you.

Peter

[-- Attachment #2 --]
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 4.4-RELEASE #0: Tue Sep 18 11:57:08 PDT 2001
    murray@builder.FreeBSD.org:/usr/src/sys/compile/GENERIC
Timecounter "i8254"  frequency 1193182 Hz
CPU: Pentium/P5 (60.00-MHz 586-class CPU)
  Origin = "GenuineIntel"  Id = 0x515  Stepping = 5
  Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
real memory  = 42205184 (41216K bytes)
config> di pcic0
config> di sn0
config> di ie0
config> di fe0
config> di ed0
config> di cs0
config> di bt0
config> di ata1
config> di aic0
config> di aha0
config> di adv0
config> en lnc0
config> ir lnc0 5
config> po lnc0 0x300
config> q
FreeBSD Kernel Configuration Utility - Version 1.2
 Type "help" for help or "visual" to go to the visual
 configuration interface (requires MGA/VGA display or
 serial terminal capable of displaying ANSI graphics).
config> drq ;l\^H \^H\^H \^Hlnc0 3
config> ls
Device   port       irq   drq   iomem   iosize   unit  flags      enab
fdc0     0x3f0      6     2     0       0        0     0          Yes  
fd0      0          0     0     0       0        0     0          Yes  
fd1      0          0     0     0       0        1     0          Yes  
ata0     0x1f0      14    0     0       0        0     0          Yes  
ata1     0x170      15    0     0       0        1     0          No   
adv0     0          0     0     0       0        0     0          No   
bt0      0          0     0     0       0        0     0          No   
aha0     0          0     0     0       0        0     0          No   
aic0     0          0     0     0       0        0     0          No   
atkbdc0  0x60       0     0     0       0        0     0          Yes  
atkbd0   0          1     0     0       0        0     0x1        Yes  
psm0     0          12    0     0       0        0     0          Yes  
vga0     0          0     0     0       0        0     0          Yes  
sc0      0          0     0     0       0        0     0x100      Yes  
npx0     0xf0       13    0     0       0        0     0          Yes  
apm0     0          0     0     0       0        0     0x20       No   
pcic0    0x3e0      0     0     d0000   0        0     0          No   
pcic1    0x3e2      0     0     d4000   0        1     0          No   
sio0     0x3f8      4     0     0       0        0     0x10       Yes  
sio1     0x2f8      3     0     0       0        1     0          Yes  
sio2     0x3e8      5     0     0       0        2     0          No   
sio3     0x2e8      9     0     0       0        3     0          No   
 
Device   port       irq   drq   iomem   iosize   unit  flags      enab
ppc0     0          7     0     0       0        0     0          Yes  
ed0      0x280      10    0     d8000   0        0     0          No   
fe0      0x300      0     0     0       0        0     0          No   
ie0      0x300      10    0     d0000   0        0     0          No   
lnc0     0x300      5     3     0       0        0     0          Yes  
cs0      0x300      0     0     0       0        0     0          No   
sn0      0x300      10    0     0       0        0     0          No   

Number of EISA slots to probe: 10
config> q
avail memory = 36540416 (35684K bytes)
Preloaded elf kernel "kernel" at 0xc0480000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc04800a8.
Intel Pentium detected, installing workaround for F00F bug
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
isa0: <ISA bus> on motherboard
isa0: too many dependant configs (8)
isa0: too many dependant configs (8)
isa0: too many dependant configs (8)
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xe0000-0xe7fff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: cannot reserve I/O port range
unknown: <Cabletron E22xx Adapter> can't assign resources
ad0: 1221MB <Seagate Technology 1275MB - ST31276A> [2482/16/63] at ata0-master BIOSPIO
acd0: CDROM <CREATIVE CD1220E> at ata0-slave using BIOSPIO
Mounting root from ufs:/dev/ad0s1a

[-- Attachment #3 --]
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 4.4-RELEASE #0: Tue Sep 18 11:57:08 PDT 2001
    murray@builder.FreeBSD.org:/usr/src/sys/compile/GENERIC
Timecounter "i8254"  frequency 1193182 Hz
CPU: Pentium/P5 (60.00-MHz 586-class CPU)
  Origin = "GenuineIntel"  Id = 0x515  Stepping = 5
  Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
real memory  = 42205184 (41216K bytes)
config> di pcic0
config> di sn0
config> di ie0
config> di fe0
config> di ed0
config> di cs0
config> di bt0
config> di ata1
config> di aic0
config> di aha0
config> di adv0
config> en lnc0
config> ir lnc0 5
config> po lnc0 0x300
config> drq lnc0 3
config> q
FreeBSD Kernel Configuration Utility - Version 1.2
 Type "help" for help or "visual" to go to the visual
 configuration interface (requires MGA/VGA display or
 serial terminal capable of displaying ANSI graphics).
config> conf\^H \^H\^H \^H\^H \^H\^H \^Hq
avail memory = 36540416 (35684K bytes)
Preloaded elf kernel "kernel" at 0xc0480000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc04800a8.
Intel Pentium detected, installing workaround for F00F bug
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
isa0: <ISA bus> on motherboard
isa0: too many dependant configs (8)
isa0: too many dependant configs (8)
isa0: too many dependant configs (8)
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xe0000-0xe7fff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: cannot reserve I/O port range
unknown: <Cabletron E22xx Adapter> can't assign resources
ad0: 1221MB <Seagate Technology 1275MB - ST31276A> [2482/16/63] at ata0-master BIOSPIO
acd0: CDROM <CREATIVE CD1220E> at ata0-slave using BIOSPIO
Mounting root from ufs:/dev/ad0s1a

[-- Attachment #4 --]
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 4.4-RELEASE #0: Tue Sep 18 11:57:08 PDT 2001
    murray@builder.FreeBSD.org:/usr/src/sys/compile/GENERIC
Timecounter "i8254"  frequency 1193182 Hz
CPU: Pentium/P5 (60.00-MHz 586-class CPU)
  Origin = "GenuineIntel"  Id = 0x515  Stepping = 5
  Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
real memory  = 42205184 (41216K bytes)
config> di pcic0
config> di sn0
config> di ie0
config> di fe0
config> di ed0
config> di cs0
config> di bt0
config> di ata1
config> di aic0
config> di aha0
config> di adv0
config> en lnc0
config> ir lnc0 5
config> po lnc0 0x200
config> drq lnc0 3
config> q
FreeBSD Kernel Configuration Utility - Version 1.2
 Type "help" for help or "visual" to go to the visual
 configuration interface (requires MGA/VGA display or
 serial terminal capable of displaying ANSI graphics).
config> q
avail memory = 36540416 (35684K bytes)
Preloaded elf kernel "kernel" at 0xc0480000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc04800a8.
Intel Pentium detected, installing workaround for F00F bug
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
isa0: <ISA bus> on motherboard
isa0: too many dependant configs (8)
isa0: too many dependant configs (8)
isa0: too many dependant configs (8)
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xe0000-0xe7fff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: cannot reserve I/O port range
unknown: <Cabletron E22xx Adapter> can't assign resources
ad0: 1221MB <Seagate Technology 1275MB - ST31276A> [2482/16/63] at ata0-master BIOSPIO
acd0: CDROM <CREATIVE CD1220E> at ata0-slave using BIOSPIO
Mounting root from ufs:/dev/ad0s1a
fd0c: hard error reading fsbn 0 of 0-3 (No status)

[-- Attachment #5 --]
P----------------------- E22_TEST.EXE adapter test results -------------------------

Cabletron E22XX Ethernet adapter.

ADAPTER 1:

Controller 1 of 2.
Base Address: 300h
DMA Channel: 3
Interrupt Level: 5
Network Address: 00-00-1D-16-74-9D

Pass Count: 4
Error Count: 0

Test Status:
Passed.

Controller 2 of 2.
Base Address: 200h
DMA Channel: 3
Interrupt Level: 5
Network Address: 00-00-1D-16-74-9D

Pass Count: 4
Error Count: 0

Test Status:
Passed.

-------------------------------- End of file ----------------------------------

[-- Attachment #6 --]
di pcic0
di sn0
di ie0
di fe0
di ed0
di cs0
di bt0
di ata1
di aic0
di aha0
di adv0
en lnc0
ir lnc0 5
po lnc0 0x300
q

[-- Attachment #7 --]
di pcic0
di sn0
di ie0
di fe0
di ed0
di cs0
di bt0
di ata1
di aic0
di aha0
di adv0
en lnc0
ir lnc0 5
po lnc0 0x300
drq lnc0 3
q

[-- Attachment #8 --]
di pcic0
di sn0
di ie0
di fe0
di ed0
di cs0
di bt0
di ata1
di aic0
di aha0
di adv0
en lnc0
ir lnc0 5
po lnc0 0x200
drq lnc0 3
q

Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?000c01c18ca3$5343e180$0101a8c0>