Date: Tue, 30 Apr 2002 12:59:26 +0200 From: Eric Masson <e-masson@kisoft-services.com> To: Mailing List FreeBSD Mobile <freebsd-mobile@FreeBSD.org> Subject: Intel 2011 & hostap settings Message-ID: <86g01dih9t.fsf@notbsdems.nantes.kisoft-services.com>
next in thread | raw e-mail | index | archive | help
Hello,
I'm trying the hostap option of wi driver and encountering the following
problem :
> ifconfig wi0 ssid 101 mediaopt hostap
ifconfig: SIOCSIFMEDIA: Device not configured
> ifconfig -a
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet 127.0.0.1 netmask 0xff000000
wi0: flags=8842<BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
ether 00:03:47:b4:8a:c1
media: IEEE 802.11 Wireless Ethernet autoselect (DS/11Mbps)
status: no carrier
ssid 101 1:101
stationname "FreeBSD WaveLAN/IEEE node"
channel 8 authmode OPEN powersavemode OFF powersavesleep 100
wepmode OFF weptxkey 1
ep0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet 192.168.0.13 netmask 0xffffff00 broadcast 192.168.0.255
ether 00:00:86:53:74:3e
So hostap is definitely not activated.
Any idea to get this working please ?
Thanks
Eric Masson
> uname -a
FreeBSD srvbsdchassv.chantilly.kisoft-services.com 4.5-STABLE
FreeBSD 4.5-STABLE #0: Tue Apr 30 12:29:58 CEST 2002
emss@srvbsdchassv.chantilly.kisoft-services.com:/usr/src/sys/compile/TSP430CDS i386
> dmesg
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.5-STABLE #0: Tue Apr 30 12:29:58 CEST 2002
emss@srvbsdchassv.chantilly.kisoft-services.com:/usr/src/sys/compile/TSP430CDS
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium/P54C (120.00-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x52c Stepping = 12
Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
real memory = 50528256 (49344K bytes)
avail memory = 46747648 (45652K bytes)
pnpbios: Bad PnP BIOS data checksum
Preloaded elf kernel "kernel" at 0xc0278000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc027809c.
Intel Pentium detected, installing workaround for F00F bug
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
isa0: <ISA bus> on motherboard
orm0: <Option ROM> at iomem 0xe4000-0xeffff on isa0
fdc0: <NEC 765 or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
ata1 at port 0x170-0x177,0x376 irq 15 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
pcic0: <Intel i82365SL-A/B> at port 0x3e0 iomem 0xd0000 on isa0
pcic0: Polling mode
pccard0: <PC Card bus (classic)> on pcic0
pccard1: <PC Card bus (classic)> on pcic0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
BRIDGE 020214 loaded
ad0: 1295MB <TOSHIBA MK1301MAV> [2633/16/63] at ata0-master BIOSPIO
acd0: CDROM <TOSHIBA CD-ROM XM-1502B> at ata1-master BIOSPIO
Mounting root from ufs:/dev/ad0s1a
pccard: card inserted, slot 0
pccard: card inserted, slot 1
wi0 at port 0x280-0x2c7 iomem 0xd4000-0xd43ff irq 3 flags 0x10000 slot 0 on pccard0
wi0: 802.11 address: 00:03:47:b4:8a:c1
wi0: using RF:PRISM2 MAC:HFA3841
wi0: Symbol Firmware: Primary 2.01.02, Station 2.20.02
ep0: <3Com 3C556> at port 0x240-0x25f irq 5 flags 0x1 slot 1 on pccard1
ep0: Ethernet address 00:00:86:53:74:3e
> cat /sys/i386/conf/TSP430CDS
#
# TSP430CDS -- kernel configuration file for FreeBSD/i386
#
machine i386
cpu I586_CPU
ident TSP430CDS
maxusers 0
makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols
# Network support
options INET #InterNETworking
options ICMP_BANDLIM #Rate limit bad replies
options BRIDGE #Interface bridging
# Filesystems support
options FFS #Berkeley Fast Filesystem
options FFS_ROOT #FFS usable as root device [keep this!]
options SOFTUPDATES #Enable FFS soft updates support
# Miscellaneous options
options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!]
options UCONSOLE #Allow users to grab the console
options KTRACE #ktrace(1) support
options KBD_INSTALL_CDEV #install a CDEV entry in /dev
# Busses
device isa
# Floppy drives
device fdc0 at isa? port IO_FD1 irq 6 drq 2
device fd0 at fdc0 drive 0
# ATA and ATAPI devices
device ata0 at isa? port IO_WD1 irq 14
device ata1 at isa? port IO_WD2 irq 15
device ata
device atadisk # ATA disk drives
device atapicd # ATAPI CDROM drives
# Console settings
device atkbdc0 at isa? port IO_KBD
device atkbd0 at atkbdc? irq 1 flags 0x1
device psm0 at atkbdc? irq 12
device vga0 at isa?
device sc0 at isa? flags 0x100
# Floating point support - do not disable.
device npx0 at nexus? port IO_NPX irq 13
# PCCARD (PCMCIA) support
device card
device pcic0 at isa? irq 0 port 0x3e0 iomem 0xd0000
# Serial (COM) ports
device sio0 at isa? port IO_COM1 flags 0x10 irq 4
# Parallel port
device ppc0 at isa? irq 7
device ppbus # Parallel port bus (required)
device lpt # Printer
# Lan support
device ep
device wi
# Pseudo devices - the number indicates how many units to allocate.
pseudo-device loop # Network loopback
pseudo-device ether # Ethernet support
pseudo-device pty # Pseudo-ttys (telnet etc)
pseudo-device bpf # Berkeley packet filter
# Power management support
device apm0 at nexus? flags 0x20
--
Bref : pas de caractères ASCII dans les en-têtes
-+- SP in GNU : ß¡Êñ ©øñf¡gµ®Ê® $Ê$ à®T¡©£Ê$ -+-
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?86g01dih9t.fsf>