Date: Wed, 11 Apr 2007 01:40:00 +0000 From: "Rick Nekus" <solarux@hotmail.com> To: freebsd-multimedia@freebsd.org Subject: Re: pvr-350 not working - how to debug? Message-ID: <BAY134-F6C5CC1C7422DA75059CFFA15F0@phx.gbl> In-Reply-To: <c39ec84c0704101646i4d20193ah5c4754afa7454116@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi, I got some success for my pvr-350 -on FreeBSD 6.2-STABLE-200703: I was able to compile both of the below ports successfully, (patched/rebuilt kernel/loaded cxm drivers,...) using; pvrxxx-20070904, and then the pvrxxx-20071004 port. -I've included the /var/log/messages of each of the above respectives ports, since the messages output was so radically different -maybe of interest ? In either case, I could "cat /dev/cxm0 > file.mpg" (...then use mplayer) and see static screen. Also, if I tried "pvr250-setchannel -a on -m 1 13" - everything hung and then just "crashed" the whole system. -It didn't like no Tuner ?, and/or I guess we now have to preset the channel frequency for testing a channel output? Here's messages from last two newest ports; ---------------------------------------------------------------------------------------------- pvrxxx-20070904 (/var/log/messages): Apr 10 20:08:14 tiger kernel: cxm0: <Conexant iTVC15 MPEG Coder> mem 0xf4000000-0xf7ffffff irq 21 at device 10.0 on pci2 Apr 10 20:08:14 tiger kernel: cxm_iic0: <Conexant iTVC15 / iTVC16 I2C controller> on cxm0 Apr 10 20:08:14 tiger kernel: iicbb0: <I2C bit-banging driver> on cxm_iic0 Apr 10 20:08:14 tiger kernel: iicbus0: <Philips I2C bus> on iicbb0 master-only Apr 10 20:08:14 tiger kernel: <2>tveeprom: ivtv version Apr 10 20:08:14 tiger kernel: <2>tveeprom: Hauppauge: model = 48132, rev = K268, serial# = 9939981 Apr 10 20:08:14 tiger kernel: <2>tveeprom: tuner = LG TAPE H001F MK3 (idx = 68, type = 47) Apr 10 20:08:14 tiger kernel: <2>tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000) Apr 10 20:08:14 tiger kernel: <2>tveeprom: audio processor = MSP4448 (type = 1b) Apr 10 20:08:14 tiger kernel: <2>tveeprom: decoder processor = SAA7115 (type = 13) Apr 10 20:08:14 tiger kernel: tuner type: 47 Apr 10 20:08:14 tiger kernel: cxm0: SAA7115 rev 1 video decoder Apr 10 20:08:14 tiger kernel: cxm0: MSP4448G-A2 audio decoder Apr 10 20:08:14 tiger kernel: cxm0: IR Remote Apr 10 20:08:14 tiger kernel: cxm0: Eeprom PAL Apr 10 20:08:14 tiger kernel: tuner: type set to 47 (LG NTSC (TAPE series)) by cxm Apr 10 20:08:14 tiger kernel: tuner: switching to v4l2 Apr 10 20:08:14 tiger kernel: <2>cxm 0-0000: Video signal: not present Apr 10 20:08:14 tiger kernel: <2>cxm 0-0000: Detected format: 0x0 Apr 10 20:08:14 tiger kernel: <2>cxm 0-0000: Detected audio mode: mono Apr 10 20:08:14 tiger kernel: <2>cxm 0-0000: Detected audio standard: not defined Apr 10 20:08:14 tiger kernel: <2>cxm 0-0000: Audio muted: no Apr 10 20:08:14 tiger kernel: <2>cxm 0-0000: Audio microcontroller: stopped Apr 10 20:08:14 tiger kernel: <2>cxm 0-0000: Configured audio standard: undefined Apr 10 20:08:14 tiger kernel: <2>cxm 0-0000: Configured audio mode: MONO1 (LANGUAGE A/Mono L+R channel for BTSC, EIAJ, A2) Apr 10 20:08:14 tiger kernel: <2>cxm 0-0000: Specified standard: automatic detection Apr 10 20:08:14 tiger kernel: <2>cxm 0-0000: Specified input: Tuner Apr 10 20:08:14 tiger kernel: <2>cxm 0-0000: Specified audio input: Tuner Apr 10 20:08:14 tiger kernel: <2>cxm 0-0000: Specified audioclock freq: undefined Apr 10 20:08:14 tiger kernel: <2>cxm 0-0000: Preferred audio mode: mono/language A Apr 10 20:08:14 tiger kernel: cxm0: [FAST] Apr 10 20:08:16 tiger kernel: cxm0: encoder firmware version 0x2060039 Apr 10 20:08:16 tiger kernel: cxm0: decoder firmware version 0x2020023 Apr 10 20:12:13 tiger syslogd: kernel boot file is /boot/kernel/kernel Apr 10 20:12:13 tiger kernel: Apr 10 20:12:13 tiger kernel: Apr 10 20:12:13 tiger kernel: Fatal trap 12: page fault while in kernel mode Apr 10 20:12:13 tiger kernel: cpuid = 1; apic id = 01 Apr 10 20:12:13 tiger kernel: fault virtual address = 0x4 Apr 10 20:12:13 tiger kernel: fault code = supervisor read, page not present Apr 10 20:12:13 tiger kernel: instruction pointer = 0x20:0xc631a146 Apr 10 20:12:13 tiger kernel: stack pointer = 0x28:0xefff4c44 Apr 10 20:12:13 tiger kernel: frame pointer = 0x28:0xefff4c4c Apr 10 20:12:13 tiger kernel: code segment = base 0x0, limit 0xfffff, type 0x1b Apr 10 20:12:13 tiger kernel: = DPL 0, pres 1, def32 1, gran 1 Apr 10 20:12:13 tiger kernel: processor eflags = interrupt enabled, resume, IOPL = 0 Apr 10 20:12:13 tiger kernel: current process = 937 (pvr250-setchannel) Apr 10 20:12:13 tiger kernel: trap number = 12 Apr 10 20:12:13 tiger kernel: panic: page fault Apr 10 20:12:13 tiger kernel: cpuid = 1 ------------------------------------------------------------------------------------ pvrxxx-20071004 (/var/log/messages): Apr 10 20:53:20 tiger kernel: cxm0: <Conexant iTVC15 MPEG Coder> mem 0xf4000000-0xf7ffffff irq 21 at device 10.0 on pci2 Apr 10 20:53:20 tiger kernel: cxm_iic0: <Conexant iTVC15 / iTVC16 I2C controller> on cxm0 Apr 10 20:53:20 tiger kernel: iicbb0: <I2C bit-banging driver> on cxm_iic0 Apr 10 20:53:20 tiger kernel: iicbus0: <Philips I2C bus> on iicbb0 master-only Apr 10 20:53:20 tiger kernel: <2>tveeprom: ivtv version Apr 10 20:53:20 tiger kernel: <2>tveeprom: Hauppauge: model = 48132, rev = K268, serial# = 9939981 Apr 10 20:53:20 tiger kernel: <2>tveeprom: tuner = LG TAPE H001F MK3 (idx = 68, type = 47) Apr 10 20:53:20 tiger kernel: <2>tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000) Apr 10 20:53:20 tiger kernel: <2>tveeprom: audio processor = MSP4448 (type = 1b) Apr 10 20:53:20 tiger kernel: <2>tveeprom: decoder processor = SAA7115 (type = 13) Apr 10 20:53:20 tiger kernel: tuner type: 47 Apr 10 20:53:20 tiger kernel: cxm0: Eeprom PAL Apr 10 20:53:20 tiger kernel: tuner: type set to 47 (LG NTSC (TAPE series)) by cxm Apr 10 20:53:20 tiger kernel: tuner: switching to v4l2 Apr 10 20:53:20 tiger kernel: tuner: tv freq set to 55.25 Apr 10 20:53:20 tiger kernel: tuner: tv 0x06 0x50 0x8e 0x01 Apr 10 20:53:20 tiger kernel: cxm0: SAA7115 rev 1 video decoder Apr 10 20:53:20 tiger kernel: cxm0: MSP4448G-A2 audio decoder Apr 10 20:53:20 tiger kernel: cxm0: IR Remote Apr 10 20:53:20 tiger kernel: cxm0: [FAST] Apr 10 20:53:22 tiger kernel: cxm0: encoder firmware version 0x2060039 Apr 10 20:53:22 tiger kernel: cxm0: decoder firmware version 0x2020023 ----------------------------------------------------------------------------------------------------------- >From: usleepless@gmail.com >To: "Sean West" <sean.west@gmail.com> >CC: "Rick Nekus" <solarux@hotmail.com>, freebsd-multimedia@freebsd.org, >freebsd-hackers@freebsd.org >Subject: Re: pvr-350 not working - how to debug? >Date: Wed, 11 Apr 2007 01:46:52 +0200 > >Sean, > >On 4/11/07, Sean West <sean.west@gmail.com> wrote: >> > if that works, fetch a new version ( fixes support for ntsc ): >> > http://usleepless.110mb.com/pvrxxx_port-10042007.tgz >> >>Complies, installs and loads fine here (outputs 'cxm0: Eeprom PAL', is >>this an issue?). Still static for me, though. > >thank you for testing. it is indeed an issue. can you post the >relevant parts of /var/log/messages? > >regards, > >usleep _________________________________________________________________ Your Space. Your Friends. Your Stories. Share your world with Windows Live Spaces. http://spaces.live.com/?mkt=en-ca
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?BAY134-F6C5CC1C7422DA75059CFFA15F0>