Date: Sat, 10 Jun 2000 00:11:12 -0400 From: Ray Kohler <ray@rjk191.rh.psu.edu> To: freebsd-current@freebsd.org Subject: ps2 mouse troubles Message-ID: <20000610001112.A317@rjk191.rh.psu.edu>
next in thread | raw e-mail | index | archive | help
Just one more report to add to the ps2 mouse discussion:
Today I moved from 4.0 to -CURRENT. Now my mouse jumps around like
other people are reporting. It worked fine before.
I tried using a different mouse. I tried using NOCHECKSYNC (even
though I'm not getting the messages). I tried this both with and
without moused, in X and in syscons. Nothing fixed it.
This machine is a desktop with no APM support running. I'm not using
a KVM. The two kinds of mice were a Logitech TrackMan Marble+
(detected as Intellimouse) and a standard Microsoft Mouse.
Does this info help anyone out? I'll include my dmesg (with -v
enabled):
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #2: Fri Jun 9 23:34:10 EDT 2000
ray@rjk191.rh.psu.edu:/usr/src/sys/compile/RJK191
Calibrating clock(s) ... TSC clock: 167095319 Hz, i8254 clock: 1193539 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
Timecounter "TSC" frequency 167046023 Hz
CPU: Pentium/P55C (167.05-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x543 Stepping = 3
Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
real memory = 83820544 (81856K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x002d8000 - 0x04fe7fff, 80805888 bytes (19728 pages)
avail memory = 78757888 (76912K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00fdb70
bios32: Entry = 0xfdb80 (c00fdb80) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xdba1
pnpbios: Found PnP BIOS data at 0xc00f6d50
pnpbios: Entry = f0000:6906 Rev = 1.0
Other BIOS signatures found:
ACPI: 00000000
Preloaded elf kernel "kernel" at 0xc02bf000.
Intel Pentium detected, installing workaround for F00F bug
npx0: <math processor> on motherboard
npx0: INT 16 interface
i586_bzero() bandwidth = 175254118 bytes/sec
bzero() bandwidth = 88425148 bytes/sec
pcib0: <Host to PCI bridge> on motherboard
found-> vendor=0x8086, dev=0x7100, revid=0x01
class=06-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
found-> vendor=0x8086, dev=0x7110, revid=0x01
class=06-01-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
found-> vendor=0x8086, dev=0x7111, revid=0x01
class=01-01-80, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[20]: type 4, range 32, base 0000ffa0, size 4, enabled
found-> vendor=0x8086, dev=0x7112, revid=0x01
class=0c-03-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=d, irq=10
map[20]: type 4, range 32, base 0000ef80, size 5, enabled
found-> vendor=0x8086, dev=0x7113, revid=0x01
class=06-80-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[90]: type 4, range 32, base 0000ff40, size 4, enabled
found-> vendor=0x1002, dev=0x4755, revid=0x9a
class=03-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=11
map[10]: type 1, range 32, base fe000000, size 24, enabled
map[14]: type 4, range 32, base 0000ec00, size 8, enabled
map[18]: type 1, range 32, base ffeff000, size 12, enabled
found-> vendor=0x1274, dev=0x5000, revid=0x00
class=04-01-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=10
map[10]: type 4, range 32, base 0000ee80, size 6, enabled
found-> vendor=0x109e, dev=0x0350, revid=0x12
class=04-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=10
map[10]: type 3, range 32, base fddff000, size 12, enabled
found-> vendor=0x10b7, dev=0x9000, revid=0x00
class=02-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=11
map[10]: type 4, range 32, base 0000ef00, size 6, enabled
pci0: <PCI bus> on pcib0
pci0: <Intel 82439TX System controller (MTXC)> (vendor=0x8086, dev=0x7100) at 0.0
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xffa0-0xffaf at device 7.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xffa0
ata0: mask=03 status0=50 status1=00
ata0: mask=03 status0=50 status1=00
ata0: devices = 0x1
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xffa8
ata1: mask=01 status0=50 status1=ff
ata1: mask=01 status0=00 status1=ff
ata1: devices = 0x4
ata1: at 0x170 irq 15 on atapci0
pci0: <Intel 82371AB/EB (PIIX4) USB controller> (vendor=0x8086, dev=0x7112) at 7.2 irq 10
pci0: <Intel 82371AB Power management controller> (vendor=0x8086, dev=0x7113) at 7.3
pci0: <ATI Mach64-GU graphics accelerator> (vendor=0x1002, dev=0x4755) at 10.0 irq 11
pcm0: <AudioPCI ES1370> port 0xee80-0xeebf irq 10 at device 11.0 on pci0
pcm: setmap 4e48000, 1000; 0xc0854000 -> 4e48000
pcm: setmap 4e49000, 1000; 0xc0855000 -> 4e49000
pci0: <unknown card> (vendor=0x109e, dev=0x0350) at 18.0 irq 10
xl0: <3Com 3c900-TPO Etherlink XL> port 0xef00-0xef3f irq 11 at device 19.0 on pci0
xl0: Ethernet address: 00:60:97:6d:9c:d8
xl0: media options word: e108
xl0: found 10baseT
xl0: found AUI
xl0: selecting 10baseT transceiver, half duplex
pnpbios: 16 devices, largest 385 bytes
PNP0c01: adding fixed memory32 range 0-0x9fbff, size=0x9fc00
PNP0c01: adding fixed memory32 range 0x9fc00-0x9ffff, size=0x400
PNP0c01: adding fixed memory32 range 0xe0000-0xfffff, size=0x20000
PNP0c01: adding fixed memory32 range 0x100000-0x4feffff, size=0x4ef0000
PNP0c01: adding fixed memory32 range 0x4ff0000-0x4ff7fff, size=0x8000
PNP0c01: adding fixed memory32 range 0x4ff8000-0x4ffffff, size=0x8000
PNP0c01: adding fixed memory32 range 0xfffc0000-0xffffffff, size=0x40000
PNP0c01: end config
pnpbios: handle 0 device ID PNP0c01 (010cd041)
PNP0000: adding fixed io range 0x20-0x21, size=0x2, align=0x1
PNP0000: adding fixed io range 0xa0-0xa1, size=0x2, align=0x1
PNP0000: adding io range 0x4d0-0x4d1, size=0x2, align=0x1
PNP0000: adding irq mask 00x4
PNP0000: end config
pnpbios: handle 1 device ID PNP0000 (0000d041)
PNP0200: adding dma mask 0x10
PNP0200: adding fixed io range 0-0xf, size=0x10, align=0x1
PNP0200: adding fixed io range 0x80-0x90, size=0x11, align=0x1
PNP0200: adding fixed io range 0x94-0x9f, size=0xc, align=0x1
PNP0200: adding fixed io range 0xc0-0xde, size=0x1f, align=0x1
PNP0200: end config
pnpbios: handle 2 device ID PNP0200 (0002d041)
PNP0100: adding irq mask 00x1
PNP0100: adding fixed io range 0x40-0x43, size=0x4, align=0x1
PNP0100: end config
pnpbios: handle 3 device ID PNP0100 (0001d041)
PNP0b00: adding irq mask 0x100
PNP0b00: adding fixed io range 0x70-0x73, size=0x4, align=0x1
PNP0b00: end config
pnpbios: handle 4 device ID PNP0b00 (000bd041)
PNP0303: adding irq mask 00x2
PNP0303: adding fixed io range 0x60-0x60, size=0x1, align=0x1
PNP0303: adding fixed io range 0x64-0x64, size=0x1, align=0x1
PNP0303: end config
pnpbios: handle 5 device ID PNP0303 (0303d041)
PNP0800: adding fixed io range 0x61-0x61, size=0x1, align=0x1
PNP0800: end config
pnpbios: handle 6 device ID PNP0800 (0008d041)
PNP0c04: adding irq mask 0x2000
PNP0c04: adding fixed io range 0xf0-0xff, size=0x10, align=0x1
PNP0c04: end config
pnpbios: handle 7 device ID PNP0c04 (040cd041)
PNP0c02: adding io range 0xb0-0xb5, size=0x6, align=0x1
PNP0c02: adding io range 0xb8-0xb9, size=0x2, align=0x1
PNP0c02: adding io range 0xbc-0xbd, size=0x2, align=0x1
PNP0c02: adding io range 0xea-0xeb, size=0x2, align=0x1
PNP0c02: adding io range 0xef-0xef, size=0x1, align=0x1
PNP0c02: adding io range 0x3f0-0x3f1, size=0x2, align=0x1
PNP0c02: end config
pnpbios: handle 8 device ID PNP0c02 (020cd041)
PNP0c02: adding io range 0xff00-0xff3f, size=0x40, align=0x1
PNP0c02: adding io range 0xff40-0xff4f, size=0x10, align=0x1
PNP0c02: end config
pnpbios: handle 9 device ID PNP0c02 (020cd041)
PNP0f13: end config
pnpbios: handle 10 device ID PNP0f13 (130fd041)
PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0x1
PNP0a03: end config
pnpbios: handle 11 device ID PNP0a03 (030ad041)
PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0x8
PNP0501: adding irq mask 0x10
PNP0501: end config
pnpbios: handle 12 device ID PNP0501 (0105d041)
PNP0c02: end config
pnpbios: handle 13 device ID PNP0c02 (020cd041)
PNP0400: adding io range 0x378-0x37b, size=0x4, align=0x8
PNP0400: adding irq mask 0x80
PNP0400: end config
pnpbios: handle 14 device ID PNP0400 (0004d041)
PNP0700: adding io range 0x3f2-0x3f5, size=0x4, align=0x1
PNP0700: adding irq mask 0x40
PNP0700: adding dma mask 0x4
PNP0700: end config
pnpbios: handle 15 device ID PNP0700 (0007d041)
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
pcm-: pcm0 exists, using next available unit number
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
psm0: current command byte:0065
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fa
kbdc: RESET_AUX status:00aa
kbdc: RESET_AUX ID:0000
psm: status 00 02 64
psm: status 39 03 c8
psm: status 39 03 c8
psm: status 39 03 c8
psm: data 08 00 00
psm: data 08 00 00
psm: status 00 02 64
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3-00, 3 buttons
psm0: config:00000000, flags:00000000, packet size:4
psm0: syncmask:08, syncbits:08
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
ppc0: parallel port found at 0x378
ppc0: This ppc chipset does not support the extended I/O port range...no problem
ppc0: EPP SPP
ppc0: <Parallel port> at port 0x378-0x37b irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: IEEE1284 device found /NIBBLE/ECP/NIBBLE_ID/ECP_ID/Extensibility Link
Probing for PnP devices on ppbus0:
ppbus0: <HEWLETT-PACKARD DESKJET 710C> SCP,VLINK
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
isa_probe_children: probing PnP devices
unknown0: <PNP0c01> at iomem 0-0x9fbff,0x9fc00-0x9ffff,0xe0000-0xfffff,0x100000-0x4feffff,0x4ff0000-0x4ff7fff,0x4ff8000-0x4ffffff,0xfffc0000-0xffffffff on isa0
unknown: <PNP0000> can't assign resources
unknown1: <PNP0200> at port 0-0xf,0x80-0x90,0x94-0x9f,0xc0-0xde drq 4 on isa0
unknown2: <PNP0100> at port 0x40-0x43 irq 0 on isa0
unknown3: <PNP0b00> at port 0x70-0x73 irq 8 on isa0
unknown: <PNP0303> can't assign resources
unknown4: <PNP0800> at port 0x61 on isa0
npxisa0: <Legacy ISA coprocessor support> at port 0xf0-0xff irq 13 on isa0
unknown: <PNP0c02> can't assign resources
unknown5: <PNP0c02> at port 0xff00-0xff3f,0xff40-0xff4f on isa0
unknown6: <PNP0f13> on isa0
unknown7: <PNP0a03> at port 0xcf8-0xcff on isa0
unknown8: <PNP0501> at port 0x3f8-0x3ff irq 4 on isa0
unknown9: <PNP0c02> on isa0
unknown: <PNP0400> can't assign resources
unknown: <PNP0700> can't assign resources
BIOS Geometries:
0:0314fe3f 0..788=789 cylinders, 0..254=255 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
ata0-master: success setting up UDMA2 mode on PIIX4 chip
ad0: <ST36540A/1.00> ATA-4 disk at ata0 as master
ad0: 6204MB (12706470 sectors), 13446 cyls, 15 heads, 63 S/T, 512 B/S
ad0: 16 secs/int, 1 depth queue, UDMA33
ad0: piomode=4 dmamode=2 udmamode=2 cblid=0
Creating DISK ad0
Creating DISK wd0
ata1-master: piomode=3 dmamode=1 udmamode=-1 dmaflag=1
ata1-master: success setting up PIO3 mode on generic chip
acd0: <TOSHIBA CD-ROM XM-6002B/0527> CDROM drive at ata1 as master
acd0: read 2755KB/s (2755KB/s), 256KB buffer, PIO3
acd0: Reads: CD-R, CD-RW, CD-DA
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray
acd0: Medium: no/blank disc inside, unlocked
Mounting root from ufs:/dev/ad0s2a
ad0s1: type 0xb, start 63, end = 6329609, size 6329547 : OK
ad0s2: type 0xa5, start 6329610, end = 12691349, size 6361740 : OK
start_init: trying /sbin/init
lpt0: switched to polled standard mode
--
Ray Kohler <rjk191@psu.edu>
FreeBSD -- The Power to Serve
HOW YOU CAN TELL THAT IT'S GOING TO BE A ROTTEN DAY:
#32: You call your answering service and they've never heard of
you.
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20000610001112.A317>