Date: Fri, 23 Jan 2004 12:28:20 -0800 From: Kent Stewart <kstewart@owt.com> To: Michael Clark <MClark@Nemschoff.com>, "'freebsd-questions@FreeBSD.ORG'" <freebsd-questions@freebsd.org> Subject: Re: 5.2 cvsup make buildworld error Message-ID: <200401231228.20638.kstewart@owt.com> In-Reply-To: <A2A28DB6D52E084783ACD6E6C6F5D790B43E04@EMAILSERVER2.nemschoff.com> References: <A2A28DB6D52E084783ACD6E6C6F5D790B43E04@EMAILSERVER2.nemschoff.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Friday 23 January 2004 12:26 pm, Michael Clark wrote: > Sry if this double post I used the wrong address the first time. > > This is the second computer I have had problems upgrade from 5.1 to > 5.2 on. The first computer I had to format as it died during > installworld and I was unable to boot it. > > This computer died on make installworld as well. After that I was > unable to use any basic commands, ls, ext. > Rebooted and it started up, and continues to run, but sendmail is > dumping constantly and I am unable to upgrade it to 5.2... > > Any help would be greatly appreciated I am at a loss as to what to do > with this one. There is a FAQ on dealing with signal errors during buildworlds and etc. They are usually hardware related and the FAQ gives you an idea on how to determine if it is bad memory or what. Kent > > Michael Clark > Nemschoff Chairs Inc > mclark at nemschoff dot com > > -------------------------------------------------------------- > > >>> stage 1.1: legacy release compatibility shims > > -------------------------------------------------------------- > cd /usr/src; MAKEOBJDIRPREFIX=/usr/obj/usr/src/i386 DESTDIR= > INSTALL="sh /usr/src/tools/install.sh" > PATH=/usr/obj/usr/src/i386/legacy/usr/sbin:/usr/obj/usr/src/i386/lega >cy/usr/ > bin:/usr/obj/usr/src/i386/legacy/usr/games:/sbin:/bin:/usr/sbin:/usr/ >bin WORLDTMP=/usr/obj/usr/src/i386 MAKEFLAGS="-m > /usr/src/tools/build/mk -m /usr/src/share/mk" > /usr/obj/usr/src/make.i386/make -f Makefile.inc1 BOOTSTRAPPING=502000 > -DNOHTML -DNOINFO -DNOLINT -DNOMAN -DNOPIC -DNOPROFILE -DNOSHARED > -DNO_CPU_CFLAGS -DNO_WARNS legacy > ===> tools/build > /usr/obj/usr/src/i386/usr/src/tools/build created for > /usr/src/tools/build cd /usr/src/tools/build; > /usr/obj/usr/src/make.i386/make buildincludes; > /usr/obj/usr/src/make.i386/make installincludes > rm -f .depend > mkdep -f .depend -a -I/usr/obj/usr/src/i386/legacy/usr/include > /usr/src/tools/build/dummy.c > cc -O -pipe -I/usr/obj/usr/src/i386/legacy/usr/include -c > /usr/src/tools/build/dummy.c > building static egacy library > ranlib libegacy.a > sh /usr/src/tools/install.sh -C -o root -g wheel -m 444 libegacy.a > /usr/obj/usr/src/i386/legacy/usr/lib > *** Signal 11 > > Stop in /usr/src/tools/build. > *** Error code 1 > > Stop in /usr/src. > *** Error code 1 > > Stop in /usr/src. > *** Error code 1 > > Stop in /usr/src. > bash-2.05b# > > > > > ----------------------------------------dmesg------------------------ >------- ----------------- > > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, > 1994 The Regents of the University of California. All rights > reserved. FreeBSD 5.2-RELEASE #1: Thu Jan 15 14:42:57 CST 2004 > root@monitor.nemschoff.com:/usr/obj/usr/src/sys/MONITOR > Preloaded elf kernel "/boot/kernel/kernel" at 0xc096e000. > Preloaded elf module "/boot/kernel/acpi.ko" at 0xc096e1cc. > Timecounter "i8254" frequency 1193182 Hz quality 0 > CPU: Intel Pentium III (601.37-MHz 686-class CPU) > Origin = "GenuineIntel" Id = 0x681 Stepping = 1 > > Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MC >A,CMOV, PAT,PSE36,MMX,FXSR,SSE> > real memory = 268419072 (255 MB) > avail memory = 251092992 (239 MB) > Pentium Pro MTRR support enabled > npx0: [FAST] > npx0: <math processor> on motherboard > npx0: INT 16 interface > acpi0: <ASUS P3B_F > on motherboard > pcibios: BIOS version 2.10 > Using $PIR table, 8 entries at 0xc00f0e70 > acpi0: Power Button (fixed) > Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 > acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on > acpi0 acpi_cpu0: <CPU> on acpi0 > acpi_button0: <Power Button> on acpi0 > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 > pci0: <ACPI PCI bus> on pcib0 > pcib0: slot 4 INTD is routed to irq 10 > pcib0: slot 9 INTA is routed to irq 10 > pcib0: slot 10 INTA is routed to irq 11 > agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem > 0xe4000000-0xe7ffffff at device 0.0 on pci0 > pcib1: <PCI-PCI bridge> at device 1.0 on pci0 > pci1: <PCI bus> on pcib1 > pci1: <display, VGA> at device 0.0 (no driver attached) > isab0: <PCI-ISA bridge> at device 4.0 on pci0 > isa0: <ISA bus> on isab0 > atapci0: <Intel PIIX4 UDMA33 controller> port 0xb800-0xb80f at device > 4.1 on pci0 > ata0: at 0x1f0 irq 14 on atapci0 > ata0: [MPSAFE] > ata1: at 0x170 irq 15 on atapci0 > ata1: [MPSAFE] > uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xb400-0xb41f > irq 10 at device 4.2 on pci0 > usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0 > usb0: USB revision 1.0 > uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub0: 2 ports with 2 removable, self powered > pci0: <bridge, PCI-unknown> at device 4.3 (no driver attached) > fxp0: <Intel 82551 Pro/100 Ethernet> port 0xb000-0xb03f mem > 0xe1800000-0xe181ffff,0xe2000000-0xe2000fff irq 10 at devic > 9.0 on pci0 > fxp0: Ethernet address > miibus0: <MII bus> on fxp0 > inphy0: <i82555 10/100 media interface> on miibus0 > inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > fxp1: <Intel 82551 Pro/100 Ethernet> port 0xa800-0xa83f mem > 0xe0800000-0xe081ffff,0xe1000000-0xe1000fff irq 11 at devic > 10.0 on pci0 > fxp1: Ethernet address > miibus1: <MII bus> on fxp1 > inphy1: <i82555 10/100 media interface> on miibus1 > inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port > 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0 > fdc0: FIFO enabled, 8 bytes threshold > fd0: <1440-KB 3.5" drive> on fdc0 drive 0 > ppc0 port 0x378-0x37f irq 7 on acpi0 > ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode > ppbus0: <Parallel port bus> on ppc0 > plip0: <PLIP network interface> on ppbus0 > lpt0: <Printer> on ppbus0 > lpt0: Interrupt-driven port > ppi0: <Parallel I/O> on ppbus0 > sio0 port 0x3f8-0x3ff irq 4 on acpi0 > sio0: type 16550A > sio1 port 0x2f8-0x2ff irq 3 on acpi0 > sio1: type 16550A > atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 > atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 > kbd0 at atkbd0 > orm0: <Option ROMs> at iomem > 0xcc000-0xcd7ff,0xc8000-0xc97ff,0xc0000-0xc7fff on isa0 > pmtimer0 on isa0 > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on > isa0 Timecounter "TSC" frequency 601365443 Hz quality 800 > Timecounters tick every 10.000 msec > acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently > 100.0% GEOM: create disk ad0 dp=0xc2e12260 > ad0: 38166MB <WDC WD400JB-00ENA0> [77545/16/63] at ata0-master UDMA33 > acd0: CDROM <50X CD-ROM> at ata1-master PIO4 > Mounting root from ufs:/dev/ad0s1a > pid 419 (sendmail), uid 0: exited on signal 11 > pid 538 (bandwidthd), uid 0: exited on signal 6 (core dumped) > fxp0: promiscuous mode enabled > fxp0: promiscuous mode disabled > fxp0: promiscuous mode enabled > pid 2469 (sendmail), uid 1002: exited on signal 11 > pid 11197 (sendmail), uid 1003: exited on signal 11 > pid 11417 (sendmail), uid 1003: exited on signal 11 > pid 15248 (sendmail), uid 1003: exited on signal 11 > fxp0: promiscuous mode disabled > fxp0: promiscuous mode enabled > pid 21924 (sendmail), uid 1003: exited on signal 11 > fxp0: promiscuous mode disabled > fxp0: promiscuous mode enabled > fxp0: promiscuous mode disabled > fxp0: promiscuous mode enabled > fxp0: promiscuous mode disabled > fxp0: promiscuous mode enabled > pid 40591 (sendmail), uid 1003: exited on signal 11 > pid 40819 (sendmail), uid 1003: exited on signal 11 > pid 42009 (sendmail), uid 1003: exited on signal 11 > fxp0: promiscuous mode disabled > fxp0: promiscuous mode enabled > pid 48577 (sendmail), uid 1003: exited on signal 11 > > > > > Michael Clark > Nemschoff Chairs Inc > mclark at nemschoff dot com > CompTIA A+, MCP > Voice: (920) 457 7726 x294 > Fax: (920) 453 6594 > > > > > CONFIDENTIALITY NOTE: This electronic transmission, including all > attachments, is directed in confidence solely to the person(s) to > whom it is addressed, or an authorized recipient, and may not > otherwise be distributed, copied or disclosed. The contents of the > transmission may also be subject to intellectual property rights and > all such rights are expressly claimed and are not waived. If you have > received this transmission in error, please notify the sender > immediately by return electronic transmission and then immediately > delete this transmission, including all attachments, without copying, > distributing or disclosing same. > > > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to > "freebsd-questions-unsubscribe@freebsd.org" -- Kent Stewart Richland, WA http://users.owt.com/kstewart/index.html
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200401231228.20638.kstewart>