Date: Mon, 6 Jul 2020 21:29:50 +0000 (UTC) From: Kristof Provost <kp@FreeBSD.org> To: src-committers@freebsd.org, svn-src-all@freebsd.org, svn-src-head@freebsd.org Subject: svn commit: r362977 - head/sys/riscv/riscv Message-ID: <202007062129.066LToSl067104@repo.freebsd.org>
next in thread | raw e-mail | index | archive | help
Author: kp Date: Mon Jul 6 21:29:50 2020 New Revision: 362977 URL: https://svnweb.freebsd.org/changeset/base/362977 Log: riscv plic: Do not complete interrupts until the interrupt handler has run We cannot complete the interrupt (i.e. write to the claims/complete register until the interrupt handler has actually run. We don't run the interrupt handler immediately from intr_isrc_dispatch(), we only schedule it for later execution. If we immediately complete it (i.e. before the interrupt handler proper has run) the interrupt may be triggered again if the interrupt source remains set. From RISC-V Instruction Set Manual: Volume II: Priviliged Architecture, 7.4 Interrupt Gateways: "If a level-sensitive interrupt source deasserts the interrupt after the PLIC core accepts the request and before the interrupt is serviced, the interrupt request remains present in the IP bit of the PLIC core and will be serviced by a handler, which will then have to determine that the interrupt device no longer requires service." In other words, we may receive interrupts twice. Avoid that by postponing the completion until after the interrupt handler has run. If the interrupt is handled by a filter rather than by scheduling an interrupt thread we must also complete the interrupt, so set up a post_filter handler (which is the same as the post_ithread handler). Reviewed by: mhorne Sponsored by: Axiado Differential Revision: https://reviews.freebsd.org/D25531 Modified: head/sys/riscv/riscv/plic.c Modified: head/sys/riscv/riscv/plic.c ============================================================================== --- head/sys/riscv/riscv/plic.c Mon Jul 6 21:20:57 2020 (r362976) +++ head/sys/riscv/riscv/plic.c Mon Jul 6 21:29:50 2020 (r362977) @@ -169,11 +169,11 @@ plic_intr(void *arg) sc = arg; cpu = PCPU_GET(cpuid); + /* Claim any pending interrupt. */ pending = RD4(sc, PLIC_CLAIM(sc, cpu)); if (pending) { tf = curthread->td_intr_frame; plic_irq_dispatch(sc, pending, tf); - WR4(sc, PLIC_CLAIM(sc, cpu), pending); } return (FILTER_HANDLED); @@ -384,7 +384,17 @@ plic_pre_ithread(device_t dev, struct intr_irqsrc *isr static void plic_post_ithread(device_t dev, struct intr_irqsrc *isrc) { + struct plic_softc *sc; + struct plic_irqsrc *src; + uint32_t cpu; + sc = device_get_softc(dev); + src = (struct plic_irqsrc *)isrc; + + cpu = CPU_FFS(&isrc->isrc_cpu) - 1; + + /* Complete the interrupt. */ + WR4(sc, PLIC_CLAIM(sc, cpu), src->irq); plic_enable_intr(dev, isrc); } @@ -451,6 +461,7 @@ static device_method_t plic_methods[] = { DEVMETHOD(pic_map_intr, plic_map_intr), DEVMETHOD(pic_pre_ithread, plic_pre_ithread), DEVMETHOD(pic_post_ithread, plic_post_ithread), + DEVMETHOD(pic_post_filter, plic_post_ithread), DEVMETHOD(pic_setup_intr, plic_setup_intr), DEVMETHOD(pic_bind_intr, plic_bind_intr),
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?202007062129.066LToSl067104>