Date: Mon, 19 Apr 1999 21:59:53 +0200 (CEST) From: Blaz Zupan <blaz@gold.amis.net> To: freebsd-current@freebsd.org Subject: PCI VGA card becomes ISA Message-ID: <Pine.BSF.4.05.9904192157440.329-100000@gold.amis.net>
next in thread | raw e-mail | index | archive | help
I noticed that after the latest round of new-bus changes, my PCI VGA card
is now recognized as a generic ISA card by the kernel. I don't see any ill
effects from this, but the new-bus developers may want to know, in case it
breaks something else.
The VGA card is a S3 Trio64V+. Here's the dmesg output I get. I don't have
an old dmesg output before the changes, but the card was recognized by
its name and it was using IRQ 9.
Copyright (c) 1992-1999 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 4.0-CURRENT #5: Mon Apr 19 21:41:42 CEST 1999
blaz@gold.amis.net:/usr/home/blaz/FreeBSD/src/sys/compile/GOLD
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium/P55C (232.88-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x543 Stepping=3
Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
real memory = 67108864 (65536K bytes)
config> pnp 1 0 os enable
config> pnp 1 0 port0 0x220 port1 0x530 port2 0x388 port3 0x370
config> pnp 1 0 irq0 5 drq0 1 drq1 0
config> pnp 2 0 os enable
config> pnp 2 0 port0 0x280 irq0 10
avail memory = 62435328 (60972K bytes)
Preloaded elf kernel "kernel" at 0xc02b6000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc02b609c.
Probing for PnP devices:
CSN 1 Vendor ID: YMH0030 [0x3000a865] Serial 0x80860001 Comp ID: PNPb02f [0x2fb0d041]
mss_attach <Yamaha SA3>1 at 0x530 irq 5 dma 1:0 flags 0x10
setting up yamaha registers
set yamaha master volume to max
pcm1 (CS423x/Yamaha/AD1816 <Yamaha SA3> sn 0x80860001) at 0x530-0x537 irq 5 drq 1 flags 0x10 on isa
CSN 2 Vendor ID: CPX1501 [0x0115180e] Serial 0x48ed418e Comp ID: PNP80d6 [0xd680d041]
ed1: address 00:80:48:ed:41:8e, type NE2000 (16 bit)
ed1 (edpnp <NE2000> sn 0x48ed418e) at 0x280-0x29f irq 10 on isa
npx0: <math processor> on motherboard
npx0: INT 16 interface
apm0: <APM BIOS> on motherboard
apm: found APM BIOS version 1.2
pcib0: <PCI host bus adapter> on motherboard
pci0: <PCI bus> on pcib0
chip0: <Intel 82439TX System Controller (MTXC)> at device 0.0 on pci0
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
chip1: <Intel 82371AB Power management controller> at device 7.3 on pci0
ahc0: <Adaptec 2940 Ultra SCSI adapter> at device 14.0 on pci0
ahc0: interrupting at irq 14
ahc0: aic7880 Single Channel A, SCSI Id=7, 16/255 SCBs
isa0: <ISA bus> on motherboard
fdc0: interrupting at irq 6
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> at fdc0 drive 0
atkbdc0: <keyboard controller (i8042)> at port 0x60 on isa0
atkbd0: <AT Keyboard> on atkbdc0
atkbd0: interrupting at irq 1
vga0: <Generic ISA VGA> on isa0
sc0: <System console> on isa0
sc0: VGA color <16 virtual consoles, flags=0x0>
sio0 at port 0x3f8-0x3ff irq 4 on isa0
sio0: type 16550A
sio0: interrupting at irq 4
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio1: interrupting at irq 3
isic0 at port 0xd80 irq 15 flags 0x3 on isa0
isic0: Teles S0/16.3
isic0: ISAC 2085 Version A1/A2 or 2086/2186 Version 1.1 (IOM-2) (Addr=0x960)
isic0: HSCX 82525 or 21525 Version 2.1 (AddrA=0x160, AddrB=0x560)
isic0: interrupting at irq 15
ppc0 at port 0x378 irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
lpt0: <generic printer> on ppbus 0
lpt0: Interrupt-driven port
ppc0: interrupting at irq 7
Intel Pentium detected, installing workaround for F00F bug
i4b: ISDN call control device attached
i4bisppp: 4 ISDN SyncPPP device(s) attached
i4bctl: ISDN system control port attached
i4bipr: 4 IP over raw HDLC ISDN device(s) attached
i4btel: 2 ISDN telephony interface device(s) attached
i4brbch: 4 raw B channel access device(s) attached
i4btrc: 4 ISDN trace device(s) attached
Waiting 2 seconds for SCSI devices to settle
changing root device to da0s1a
da1 at ahc0 bus 0 target 1 lun 0
da1: <NEC D3847 0307> Fixed Direct Access SCSI-2 device
da1: 10.000MB/s transfers (10.000MHz, offset 15)
da1: 1547MB (3170160 512 byte sectors: 255H 63S/T 197C)
cd0 at ahc0 bus 0 target 3 lun 0
cd0: <TEAC CD-ROM CD-532S 3.0A> Removable CD-ROM SCSI-2 device
cd0: 10.000MB/s transfers (10.000MHz, offset 15)
cd0: Attempt to query device size failed: NOT READY, Medium not present
da0 at ahc0 bus 0 target 0 lun 0
da0: <IBM DORS-32160 WA6A> Fixed Direct Access SCSI-2 device
da0: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled
da0: 2063MB (4226725 512 byte sectors: 255H 63S/T 263C)
ffs_mountfs: superblock updated for soft updates
ffs_mountfs: superblock updated for soft updates
ffs_mountfs: superblock updated for soft updates
Blaz Zupan, blaz@medinet.si, http://home.amis.net/blaz
Medinet d.o.o., Linhartova 21, 2000 Maribor, Slovenia
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.05.9904192157440.329-100000>