Date: Fri, 8 Jun 2001 13:56:12 -0400 From: Greg Pavelcak <gpav@som.umass.edu> To: freebsd-questions@freebsd.org Subject: USB Flash-Card Reader Message-ID: <20010608135611.A460@208b.umsom.edu>
next in thread | raw e-mail | index | archive | help
Speaking of more robust USB support. I bought a flash-card reader for
work. Of course it has drivers for windows and works, but I would love
to be able to use it in FreeBSD. It is a
*NewMedia USB Port Flash-Link*
All dmesg says about it is (I have a verbose boot at the end in case
there's some other useful info):
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x6400-0x641f irq 11 at device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ugen0: SIIG product 0x0001, rev 1.00/0.01, addr 2
I read an earlier e-mail that said the sandisk is treated as a scsi
device da*. I do have scbus et al in my KERNCONF:
device scbus
device da
device sa
device cd
device pass
device pt
options SCSI_DELAY=8000
device uhci
device ohci
device usb
device ugen
device uhid
device umass
device ulpt
Anyway, if there's any useful information I can provide to help get
this working, I'll be glad to do what I can to contribute.
Unfortunately, my knowledge in this area is limited. Any
feedback/pointers greatly appreciated.
Thanks.
Greg
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.3-STABLE #3: Mon Jun 4 08:43:27 EDT 2001
gp@208b.umsom.edu:/usr/obj/usr/src/sys/MIN
Calibrating clock(s) ... TSC clock: 451029155 Hz, i8254 clock: 1193198 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
Timecounter "TSC" frequency 451025067 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (451.03-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x673 Stepping = 3
Features=0x387f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,SSE>
real memory = 67108864 (65536K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x00420000 - 0x03ff7fff, 62750720 bytes (15320 pages)
config> di pcic0
No such device: pcic0
Invalid command or syntax. Type `?' for help.
config> di bt0
No such device: bt0
Invalid command or syntax. Type `?' for help.
config> di aic0
No such device: aic0
Invalid command or syntax. Type `?' for help.
config> di aha0
No such device: aha0
Invalid command or syntax. Type `?' for help.
config> di adv0
No such device: adv0
Invalid command or syntax. Type `?' for help.
config> q
avail memory = 60928000 (59500K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00faf70
bios32: Entry = 0xfb3f0 (c00fb3f0) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xb420
pnpbios: Found PnP BIOS data at 0xc00fbfd0
pnpbios: Entry = f0000:bff8 Rev = 1.0
Other BIOS signatures found:
ACPI: 00000000
Preloaded elf kernel "kernel" at 0xc03fa000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc03fa0a8.
VESA: information block
56 45 53 41 00 02 00 01 00 01 00 00 00 00 22 00
00 01 80 00 00 01 0b 01 00 01 21 01 00 01 2a 01
00 01 00 01 01 01 10 01 11 01 12 01 03 01 13 01
14 01 15 01 05 01 16 01 17 01 18 01 07 01 19 01
VESA: 3 mode(s) found
VESA: v2.0, 8192k memory, flags:0x0, mode table:0xc037ff42 (1000022)
VESA: ATI MACH64
VESA: ATI Technologies Inc. MACH64GT 01.00
Pentium Pro MTRR support enabled
md0: Malloc disk
Creating DISK md0
pci_open(1): mode 1 addr port (0x0cf8) is 0x80003afc
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71908086)
npx0: <math processor> on motherboard
npx0: INT 16 interface
pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71908086)
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
found-> vendor=0x8086, dev=0x7190, revid=0x03
class=06-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[10]: type 1, range 32, base e0000000, size 26
found-> vendor=0x8086, dev=0x7191, revid=0x03
class=06-04-00, hdrtype=0x01, mfdev=0
subordinatebus=1 secondarybus=1
found-> vendor=0x8086, dev=0x7110, revid=0x02
class=06-01-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
found-> vendor=0x8086, dev=0x7111, revid=0x01
class=01-01-80, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[20]: type 1, range 32, base 0000f000, size 4
found-> vendor=0x8086, dev=0x7112, revid=0x01
class=0c-03-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=d, irq=11
map[20]: type 1, range 32, base 00006400, size 5
found-> vendor=0x8086, dev=0x7113, revid=0x02
class=06-80-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[90]: type 1, range 32, base 00005000, size 4
found-> vendor=0x1274, dev=0x5000, revid=0x01
class=04-01-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=11
map[10]: type 1, range 32, base 00006800, size 6
found-> vendor=0x10b7, dev=0x9055, revid=0x64
class=02-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=10
map[10]: type 1, range 32, base 00006c00, size 7
map[14]: type 1, range 32, base e8000000, size 7
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
found-> vendor=0x1002, dev=0x475a, revid=0x7a
class=03-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=5
map[10]: type 1, range 32, base e6000000, size 24
map[14]: type 1, range 32, base 0000e000, size 8
map[18]: type 1, range 32, base e5000000, size 12
pci1: <PCI bus> on pcib1
pci1: <ATI Mach64-GZ graphics accelerator> (vendor=0x1002, dev=0x475a) at 0.0 irq 5
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xf000-0xf00f at device 7.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xf000
ata0: mask=03 status0=50 status1=50
ata0: mask=03 ostat0=50 ostat2=50
ata0-master: ATAPI probe a=00 b=00
ata0-slave: ATAPI probe a=00 b=00
ata0: mask=03 status0=50 status1=50
ata0-master: ATA probe a=01 b=a5
ata0-slave: ATA probe a=01 b=a5
ata0: devices=03
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xf008
ata1: mask=01 status0=50 status1=ff
ata1: mask=01 ostat0=50 ostat2=ff
ata1-master: ATAPI probe a=14 b=eb
ata1: mask=01 status0=00 status1=ff
ata1: devices=04
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x6400-0x641f irq 11 at device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ugen0: SIIG product 0x0001, rev 1.00/0.01, addr 2
chip1: <Intel 82371AB Power management controller> port 0x5000-0x500f at device 7.3 on pci0
pcm0: <AudioPCI ES1370> port 0x6800-0x683f irq 11 at device 9.0 on pci0
using shared irq11.
pcm: setmap 3d72000, 1000; 0xc0e9e000 -> 3d72000
pcm: setmap 3d73000, 1000; 0xc0e9f000 -> 3d73000
xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0x6c00-0x6c7f mem 0xe8000000-0xe800007f irq 10 at device 11.0 on pci0
xl0: Ethernet address: 00:50:04:a0:7f:c5
xl0: media options word: a
xl0: found MII/AUTO
miibus0: <MII bus> on xl0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: OUI 0x001018, model 0x0012, rev. 0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bpf: xl0 attached
ata-: ata0 exists, using next available unit number
ata-: ata1 exists, using next available unit number
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3-00, 3 buttons
psm0: config:00000000, flags:00000000, packet size:4
psm0: syncmask:08, syncbits:08
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x700ff
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
ata2 failed to probe at port 0x1f0 irq 14 on isa0
ata3 failed to probe at port 0x170 irq 15 on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: irq maps: 0x41 0x51 0x41 0x41
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
pca0 at port 0x40 on isa0
pcf0: <PCF8584 I2C bus controller> at port 0x320-0x321 irq 5 on isa0
iicbus0: <Philips I2C bus> on pcf0 addr 0xaa
iicsmb0: <I2C to SMB bridge> on iicbus0
smbus0: <System Management Bus> on iicsmb0
smbus: smb devclass not found
iic0: <I2C general purpose I/O> on iicbus0
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: EPP SPP
ppc_detect_fifo: PWord not supported
ppc0: <Parallel port> at port 0x378-0x37f irq 7 flags 0x8 on isa0
ppc0: Generic chipset (ECP-only) in ECP mode
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
pcfclock0: <PCF-1.0> on ppbus0
ppi0: <Parallel I/O> on ppbus0
pps0: <Pulse per second Timing Interface> on ppbus0
imm0: (disconnect) s1=0x98 s2=0x98, s3=0x18
imm0: NIBBLE mode unavailable!
plip0: <PLIP network interface> on ppbus0
bpf: lp0 attached
isa_probe_children: probing PnP devices
BIOS Geometries:
0:03fffe3f 0..1023=1024 cylinders, 0..254=255 heads, 1..63=63 sectors
1:03ff0f3f 0..1023=1024 cylinders, 0..15=16 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
bpf: xl0f0 attached
bpf: xl0f1 attached
bpf: xl0f2 attached
bpf: xl0f3 attached
bpf: gif0 attached
bpf: gif1 attached
bpf: gif2 attached
bpf: gif3 attached
bpf: lo0 attached
bpf: ppp0 attached
bpf: ppp1 attached
new masks: bio 68c840, tty 631892, net 671cb2
bpf: sl0 attached
bpf: sl1 attached
bpf: stf0 attached
bpf: faith0 attached
ncp_load: [210-213]
ata0-master: success setting UDMA2 on Intel chip
Creating DISK ad0
Creating DISK wd0
ad0: <ST38421A/6.01> ATA-4 disk at ata0-master
ad0: 8056MB (16498944 sectors), 16368 cyls, 16 heads, 63 S/T, 512 B/S
ad0: 16 secs/int, 1 depth queue, UDMA33
ad0: piomode=4 dmamode=2 udmamode=2 cblid=1
ad0: 8056MB <ST38421A> [16368/16/63] at ata0-master UDMA33
ata0-slave: success setting UDMA2 on Intel chip
Creating DISK ad1
Creating DISK wd1
ad1: <WDC AC310200R/17.01J17> ATA-4 disk at ata0-slave
ad1: 9787MB (20044080 sectors), 19885 cyls, 16 heads, 63 S/T, 512 B/S
ad1: 16 secs/int, 1 depth queue, UDMA33
ad1: piomode=4 dmamode=2 udmamode=4 cblid=1
ad1: 9787MB <WDC AC310200R> [19885/16/63] at ata0-slave UDMA33
ata1-master: piomode=4 dmamode=2 udmamode=2 dmaflag=1
ata1-master: success setting PIO4 on generic chip
acd0: <ATAPI CD-ROM DRIVE 40X MAXIMUM/T0FP> CDROM drive at ata1 as master
acd0: read 6890KB/s (6890KB/s), 128KB buffer, PIO4
acd0: Reads: CD-R, CD-RW, CD-DA stream
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray
acd0: Medium: no/blank disc inside, unlocked
Mounting root from ufs:/dev/ad1s1a
ad1s1: type 0xa5, start 63, end = 20044079, size 20044017 : OK
start_init: trying /sbin/init
splash: image decoder found: blank_saver
Linux-ELF exec handler installed
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20010608135611.A460>