Date: Tue, 1 Apr 2008 21:44:29 +0200 From: "Josep Pujadas i Jubany" <josep@bellera.cat> To: freebsd-current@freebsd.org Subject: RE: Only 100baseTX with bge BCM5722 Message-ID: <20080401193322.M70732@bellera.cat> In-Reply-To: <5D267A3F22FD854F8F48B3D2B523819324EF6342B6@IRVEXCHCCR01.corp.ad.broadcom.com> References: <20080401093503.M45196@bellera.cat> <5D267A3F22FD854F8F48B3D2B523819324EF6342B6@IRVEXCHCCR01.corp.ad.broadcom.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Tue, 1 Apr 2008 10:18:55 -0700, David Christensen wrote > > Hello! > > > > Scenario: > > > > * Machine: HP Proliant ML110 G5 > > * Integrated NIC: Broadcom NetXtreme BCM5722 Gigabit Ethernet PCIe > > * FreeBSD 7.0 > > * Kernel recompiled patching bge driver as explained at > > http://www.freebsd.org/cgi/query-pr.cgi?pr=kern/119779 > > > > The card works only at 100baseTX: > > > > media: Ethernet autoselect (100baseTX <full-duplex>) > > status: active > > > > If I try: > > > > # ifconfig bge0 media 1000baseTX mediaopt full-duplex > > > > I obtain: > > > > media: Ethernet 1000baseTX <full-duplex> > > status: no carrier > > > > Of course, the card is connected to a Gigabit switch, as other FreeBSD > > machines that we have. > > > > The problem seems similar to > > http://lists.freebsd.org/pipermail/freebsd- > > current/2008-April/084606.html > > > > Any idea? > > What's the dmesg output? Is it using ukphy or brgphy? > > Dave > > _______________________________________________ Dave, Partial dmesg, concerning the NIC: pcib4: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0 pci14: <ACPI PCI bus> on pcib4 bge0: <HP NC105i PCIe Gigabit Server Adapter, ASIC rev. 0xa200> mem 0xed000000-0xed00ffff irq 17 at device 0.0 on pci14 miibus0: <MII bus> on bge0 ukphy0: <Generic IEEE 802.3u media interface> PHY 1 on miibus0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto bge0: Ethernet address: XXXXXXXXXXXXXXXXXXXXX bge0: [ITHREAD] bge0: link state changed to UP Must I try 1000baseT-FDX instead than 1000baseTX in my ifconfig line? Regards, Josep Pujadas
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20080401193322.M70732>