Date: Wed, 12 Aug 2009 07:28:53 +1000 From: Nathan Le Nevez <nathan@lenevez.net.au> To: Krassimir Slavchev <krassi@bulinfo.net> Cc: "freebsd-performance@freebsd.org" <freebsd-performance@freebsd.org> Subject: RE: Very slow I/O performance on HP BL465c Message-ID: <E4017C3E98A898429226B28DFA7730DBC165110841@talon.lenevez.net.au> In-Reply-To: <4A8159A8.3030206@bulinfo.net> References: <C6A6F02B.5D66%nathan@lenevez.net.au> <4A8159A8.3030206@bulinfo.net>
next in thread | previous in thread | raw e-mail | index | archive | help
# vmstat -i interrupt total rate irq1: atkbd0 18 0 irq5: ohci0 ohci1+ 1 0 irq19: ciss0 144916 3 irq21: uhci0 22 0 cpu0: timer 80002970 1999 irq256: bce0 17042 0 cpu2: timer 79994902 1999 cpu1: timer 79994975 1999 cpu3: timer 79995009 1999 cpu6: timer 79994957 1999 cpu5: timer 79995046 1999 cpu4: timer 79995041 1999 cpu7: timer 79995057 1999 Total 640129956 16000 # camcontrol tags da0 (pass0:ciss0:0:0:0): device openings: 254 Just for clarification, both systems are running amd64. Thanks, Nathan -----Original Message----- From: Krassimir Slavchev [mailto:krassi@bulinfo.net]=20 Sent: Tuesday, 11 August 2009 9:45 PM To: Nathan Le Nevez Cc: freebsd-performance@freebsd.org Subject: Re: Very slow I/O performance on HP BL465c -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, What is the output of 'vmstat -i' and 'camcontrol tags da0' ? I have a ML350 running 7-STABLE with same controller and disks and performance is almost same as your good server. Nathan Le Nevez wrote: > Hi, >=20 > I'm running 7.2-p3 on 2x HP BL465c blade servers, one of which performs v= ery > poorly. Both have the same RAID controller and 2 x 146GB 10k SAS disks > configured in RAID-1. Both controllers have write-cache enabled. Both > servers are running the same BIOS and firmware versions. Neither servers = are > running any services other than sshd. >=20 > Blade with good performance (2 x Opteron 2218, 8GB RAM): >=20 > ciss0: <HP Smart Array E200i> port 0x4000-0x40ff mem > 0xfdf80000-0xfdffffff,0xfdf70000-0xfdf77fff irq 19 at device 8.0 on pci80 > ciss0: [ITHREAD] > da0 at ciss0 bus 0 target 0 lun 0 > da0: <COMPAQ RAID 1 VOLUMES MOPK:> AFPi xCePdU D#i2r Leacuntc hAcecde!= s > s SCSI-5 device > da0: 135.168MB/s transfers > dSaM0P:: CAoP CPU #3 Launched! > mmand Queueing Enabled > da0: 139979MB (286677120 512 byte sectors: 255H 32S/T 35132C) >=20 > Blade with bad performance (2 x Opteron 2352, 16GB RAM): >=20 > ciss0: <HP Smart Array E200i> port 0x4000-0x40ff mem > 0xfdf80000-0xfdffffff,0xfdf70000-0xfdf77fff irq 19 at device 8.0 on pci80 > ciss0: [ITHREAD] > da0 at ciss0 bus 0 target 0 lun 0 > da0: <COMPAQ RAID 1 VOLUME OK> Fixed Direct Access SCSI-5 device > da0: 135.168MB/s transfers > da0: Command Queueing Enabled > da0: 139979MB (286677120 512 byte sectors: 255H 32S/T 35132C) >=20 > # dbench -t 10 1 2 3 4 > blade1 183.456 MB/sec 236.86 MB/sec 299.28 MB/sec 192.675 MB/s= ec > blade2 6.97931 MB/sec 9.42293 MB/sec 10.2482 MB/sec 12.407 MB/se= c >=20 > Any help/ideas would be greatly appreciated. I have run through all the > Insight diagnostics tools and it fails to find anything wrong with the sl= ow > server. >=20 > Cheers, > Nathan=20 >=20 > _______________________________________________ > freebsd-performance@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-performance > To unsubscribe, send any mail to "freebsd-performance-unsubscribe@freebsd= .org" >=20 -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.7 (FreeBSD) iD8DBQFKgVmoxJBWvpalMpkRAvilAJsGF0J34SgD34EcBxX8Ic8Hq6OUBACghpBL C7YgX2qmvgb7WSvgFhDrKl8=3D =3DJDJx -----END PGP SIGNATURE-----
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?E4017C3E98A898429226B28DFA7730DBC165110841>