Date: Thu, 7 Jun 2007 09:05:40 +0200 From: Marc "UBM" Bocklet <ubm@u-boot-man.de> To: freebsd-stable@freebsd.org Subject: Re: Western Digital MyBook 250GB USB takes *really* long to be recognized Message-ID: <20070607090540.7299279f.ubm@u-boot-man.de> In-Reply-To: <20070606234525.06fb4ee5.ubm@u-boot-man.de> References: <20070606234525.06fb4ee5.ubm@u-boot-man.de>
next in thread | previous in thread | raw e-mail | index | archive | help
[-- Attachment #1 --]
On Wed, 6 Jun 2007 23:45:25 +0200
Marc "UBM" Bocklet <ubm@u-boot-man.de> wrote:
>
> Hiho! ;-)
>
> I just bought a Western Digital MyBook 250GB external USB 2.0 drive
> and I stumbled upon the problem mentioned in:
>
> kern/107495: Fix long wait before WD My Book 250GB (USB) is recognized
>
> There's a patch attached to that PR, which I applied, but it didn't
> help.
>
> FreeBSD version is FreeBSD ubm.mine.nu 6.2-STABLE FreeBSD 6.2-STABLE
> 4: Wed Jun 6 19:58:12 CEST 2007
>
>
>
> Symptoms are as follows:
>
> when I plug the drive in, it is immediately
> recognized by umass as:
>
> umass0: Western Digital External HDD, rev 2.00/1.08, addr 2
>
> About 10 to 15 minutes later, cam kicks in and recognizes it as:
>
> da0 at umass-sim0 bus 0 target 0 lun 0
> da0: <WD 2500BB External 0108> Fixed Direct Access SCSI-0 device
> da0: 40.000MB/s transfers
> da0: 238475MB (488397168 512 byte sectors: 255H 63S/T 30401C)
>
> >From that point onwards, everything works fine, I just finished
> rsyncing my entire home directory (about 40gb) to the disk with ehci
> enabled.
>
> I'm just curious if there is anything to be done about the long delay?
> (not that I care that much, drive is attached to my "server", so it
> won't be unplugged or be turned off very soon :-))
>
> Thanks in advance! :-)
forgot my dmesg, find it attached to this mail :-)
Bye
Marc
[-- Attachment #2 --]
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-STABLE #4: Wed Jun 6 19:58:12 CEST 2007
root@ubm.mine.nu:/usr/obj/usr/src/sys/SUBMARINE_SMP
ACPI APIC Table: <XPC AWRDACPI>
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) 64 Processor 3500+ (1004.90-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0xff0 Stepping = 0
Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
AMD Features=0xe0500800<SYSCALL,NX,MMX+,LM,3DNow+,3DNow>
real memory = 1073676288 (1023 MB)
avail memory = 1041518592 (993 MB)
ioapic0 <Version 1.1> irqs 0-23 on motherboard
acpi0: <XPC AWRDACPI> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
cpu0: <ACPI CPU> on acpi0
powernow0: <Cool`n'Quiet K8> on cpu0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff,0xcf0-0xcf3 on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <NVIDIA nForce3-250 AGP Controller> mem 0xe8000000-0xebffffff at device 0.0 on pci0
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xee002000-0xee002fff irq 20 at device 2.0 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
ohci1: <OHCI (generic) USB controller> mem 0xee003000-0xee003fff irq 21 at device 2.1 on pci0
ohci1: [GIANT-LOCKED]
usb1: OHCI version 1.0, legacy support
usb1: SMM does not respond, resetting
usb1: <OHCI (generic) USB controller> on ohci1
usb1: USB revision 1.0
uhub1: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 4 ports with 4 removable, self powered
ehci0: <NVIDIA nForce3 250 USB 2.0 controller> mem 0xee004000-0xee0040ff irq 22 at device 2.2 on pci0
ehci0: [GIANT-LOCKED]
usb2: EHCI version 1.0
usb2: companion controllers, 4 ports each: usb0 usb1
usb2: <NVIDIA nForce3 250 USB 2.0 controller> on ehci0
usb2: USB revision 2.0
uhub2: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 8 ports with 8 removable, self powered
pcm0: <nVidia nForce3 250> port 0xe100-0xe1ff,0xe200-0xe27f mem 0xee000000-0xee000fff irq 20 at device 6.0 on pci0
pcm0: <Avance Logic ALC655 AC97 Codec>
atapci0: <nVidia nForce3 Pro UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 8.0 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
atapci1: <nVidia nForce3 Pro SATA150 controller> port 0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xe900-0xe90f,0xea00-0xea7f irq 21 at device 10.0 on pci0
ata2: <ATA channel 0> on atapci1
ata3: <ATA channel 1> on atapci1
pcib1: <ACPI PCI-PCI bridge> at device 11.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 14.0 on pci0
pci2: <ACPI PCI bus> on pcib2
ohci2: <NEC uPD 9210 USB controller> mem 0xed026000-0xed026fff irq 18 at device 6.0 on pci2
ohci2: [GIANT-LOCKED]
usb3: OHCI version 1.0
usb3: <NEC uPD 9210 USB controller> on ohci2
usb3: USB revision 1.0
uhub3: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 3 ports with 3 removable, self powered
ohci3: <NEC uPD 9210 USB controller> mem 0xed027000-0xed027fff irq 19 at device 6.1 on pci2
ohci3: [GIANT-LOCKED]
usb4: OHCI version 1.0
usb4: <NEC uPD 9210 USB controller> on ohci3
usb4: USB revision 1.0
uhub4: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
ehci1: <NEC uPD 720100 USB 2.0 controller> mem 0xed024000-0xed0240ff irq 16 at device 6.2 on pci2
ehci1: [GIANT-LOCKED]
usb5: EHCI version 1.0
usb5: companion controllers, 3 ports each: usb3 usb4
usb5: <NEC uPD 720100 USB 2.0 controller> on ehci1
usb5: USB revision 2.0
uhub5: NEC EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub5: 5 ports with 5 removable, self powered
umass0: Western Digital External HDD, rev 2.00/1.08, addr 2
pci2: <serial bus, FireWire> at device 7.0 (no driver attached)
skc0: <Marvell Gigabit Ethernet> port 0xd100-0xd1ff mem 0xed020000-0xed023fff irq 16 at device 8.0 on pci2
skc0: Marvell Yukon Lite Gigabit Ethernet rev. A3(0x7)
sk0: <Marvell Semiconductor, Inc. Yukon> on skc0
sk0: Ethernet address: 00:30:1b:b5:fb:d9
miibus0: <MII bus> on sk0
e1000phy0: <Marvell 88E1000 Gigabit PHY> on miibus0
e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto
acpi_tz0: <Thermal Zone> on acpi0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77b irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcbfff,0xcc000-0xcffff,0xd0000-0xd0fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
ums0: Logitech USB-PS/2 Optical Mouse, rev 2.00/24.10, addr 2, iclass 3/1
ums0: 8 buttons and Z dir.
Timecounter "TSC" frequency 1004896102 Hz quality 800
Timecounters tick every 1.000 msec
ad0: 76319MB <Seagate ST380020A 3.39> at ata0-master UDMA100
acd0: CDRW <LITE-ON LTR-12101B/LS3G> at ata1-master PIO4
umass0: at uhub5 port 4 (addr 2) disconnected
Trying to mount root from ufs:/dev/ad0s1a
umass0: detached
sk0: link state changed to UP
umass0: Western Digital External HDD, rev 2.00/1.08, addr 2
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20070607090540.7299279f.ubm>