Date: Wed, 5 Feb 2014 20:00:03 GMT From: kaczorem <kaczorem@iem.pw.edu.pl> To: freebsd-amd64@FreeBSD.org Subject: Re: amd64/186485: Disks are not shown on Adaptec 5805 (added via passthrough to the VM) Message-ID: <201402052000.s15K03jp090463@freefall.freebsd.org>
index | next in thread | raw e-mail
The following reply was made to PR amd64/186485; it has been noted by GNATS. From: kaczorem <kaczorem@iem.pw.edu.pl> To: bug-followup@FreeBSD.org Cc: Subject: Re: amd64/186485: Disks are not shown on Adaptec 5805 (added via passthrough to the VM) Date: Wed, 05 Feb 2014 20:54:46 +0100 Just I would like to add some additional information: logs: aac0: <Adaptec RAID 5805> mem 0xfd200000-0xfd3fffff irq 18 at device 0.0 on pci3 aac0: Enabling 64-bit address support aac0: Enable Raw I/O aac0: Enable 64-bit array aac0: New comm. interface enabled aac0: Adaptec 5805, aac driver 2.1.9-1 aacp0 on aac0 aacp1 on aac0 aacp2 on aac0 (probe2:aacp2:0:0:0): REPORT LUNS. CDB: a0 00 00 00 00 00 00 00 00 10 00 00 (probe2:aacp2:0:0:0): CAM status: CCB request completed with an error (probe2:aacp2:0:0:0): Retrying command (probe2:aacp2:0:0:0): REPORT LUNS. CDB: a0 00 00 00 00 00 00 00 00 10 00 00 (probe2:aacp2:0:0:0): CAM status: CCB request completed with an error (probe2:aacp2:0:0:0): Retrying command (probe2:aacp2:0:0:0): REPORT LUNS. CDB: a0 00 00 00 00 00 00 00 00 10 00 00 (probe2:aacp2:0:0:0): CAM status: CCB request completed with an error (probe2:aacp2:0:0:0): Retrying command (probe2:aacp2:0:0:0): REPORT LUNS. CDB: a0 00 00 00 00 00 00 00 00 10 00 00 (probe2:aacp2:0:0:0): CAM status: CCB request completed with an error (probe2:aacp2:0:0:0): Retrying command (probe2:aacp2:0:0:0): REPORT LUNS. CDB: a0 00 00 00 00 00 00 00 00 10 00 00 (probe2:aacp2:0:0:0): CAM status: CCB request completed with an error (probe2:aacp2:0:0:0): Retrying command (probe2:aacp2:0:0:0): REPORT LUNS. CDB: a0 00 00 00 00 00 00 00 00 10 00 00 (probe2:aacp2:0:0:0): CAM status: CCB request completed with an error (probe2:aacp2:0:0:0): Error 5, Retries exhausted ses0 at aacp2 bus 0 scbus4 target 0 lun 0 ses0: <AIC SES_BP-4D-1F 130a> Fixed Enclosure Services SCSI-5 device ses0: 3.300MB/s transfers (8bit) ses0: SCSI-3 ENC Device I did tests also on: 9.2 Stable, 10 and 11. The same problem. The Adaptec controller 5805 has the latest firmware.help
Want to link to this message? Use this
URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201402052000.s15K03jp090463>