Date: Wed, 18 Feb 2026 00:51:48 +0000 (GMT) From: jenkins-admin@FreeBSD.org To: wulf@FreeBSD.org, dev-ci@FreeBSD.org Cc: jenkins-admin@FreeBSD.org Subject: FreeBSD-stable-14-amd64-test - Build #1810 - Still Failing Message-ID: <1757119162.291.1771375908328@jenkins.ci.freebsd.org> In-Reply-To: <1359936769.117.1771282936077@jenkins.ci.freebsd.org>
index | next in thread | previous in thread | raw e-mail
FreeBSD-stable-14-amd64-test - Build #1810 (0280fef4ba5e3baeac7511deea50b91466a69e95) - Still Failing Build information: https://ci.FreeBSD.org/job/FreeBSD-stable-14-amd64-test/1810/ Full change log: https://ci.FreeBSD.org/job/FreeBSD-stable-14-amd64-test/1810/changes Full build log: https://ci.FreeBSD.org/job/FreeBSD-stable-14-amd64-test/1810/console Status explanation: "Failure" - the build is suspected being broken by the following changes "Still Failing" - the build has not been fixed by the following changes and this is a notification to note that these changes have not been fully tested by the CI system Change summaries: (Those commits are likely but not certainly responsible) 4291d770fd8a9190f06910a91fb6bd6e77ded9ef by wulf: evdev: Sync event codes with Linux kernel 6.18 0280fef4ba5e3baeac7511deea50b91466a69e95 by wulf: evdev: Drop comments from input-event-codes.h The end of the build log: [...truncated 4.27 MiB...] epair0a: link state changed to DOWN epair1a: link state changed to DOWN epair1b: link state changed to DOWN failed: atf-check failed; see the output of the test for details [4.435s] sys/netpfil/pf/scrub_pass:set_tos_v6 -> epair0a: Ethernet address: 02:24:08:9a:02:0a epair0b: Ethernet address: 02:24:08:9a:02:0b epair0a: link state changed to UP epair0b: link state changed to UP epair1a: Ethernet address: 02:0a:8d:75:fe:0a epair1b: Ethernet address: 02:0a:8d:75:fe:0b epair1a: link state changed to UP epair1b: link state changed to UP epair1b: promiscuous mode enabled epair0a: promiscuous mode enabled epair0a: promiscuous mode disabled epair1b: promiscuous mode disabled epair0b: link state changed to DOWN epair0a: link state changed to DOWN epair1a: link state changed to DOWN epair1b: link state changed to DOWN failed: atf-check failed; see the output of the test for details [4.441s] sys/netpfil/pf/sctp:abort_v4 -> epair0a: Ethernet address: 02:83:ea:4c:e6:0a epair0b: Ethernet address: 02:83:ea:4c:e6:0b epair0a: link state changed to UP epair0b: link state changed to UP epair0a: link state changed to DOWN epair0b: link state changed to DOWN failed: atf-check failed; see the output of the test for details [11.168s] sys/netpfil/pf/sctp:abort_v6 -> epair0a: Ethernet address: 02:00:80:23:e0:0a epair0b: Ethernet address: 02:00:80:23:e0:0b epair0a: link state changed to UP epair0b: link state changed to UP epair0a: link state changed to DOWN epair0b: link state changed to DOWN failed: atf-check failed; see the output of the test for details [0.097s] sys/netpfil/pf/sctp:basic_v4 -> epair0a: Ethernet address: 02:c8:39:4e:58:0a epair0b: Ethernet address: 02:c8:39:4e:58:0b epair0a: link state changed to UP epair0b: link state changed to UP epair0a: link state changed to DOWN epair0b: link state changed to DOWN failed: atf-check failed; see the output of the test for details [11.209s] sys/netpfil/pf/sctp:basic_v6 -> epair0a: Ethernet address: 02:2d:bd:0f:12:0a epair0b: Ethernet address: 02:2d:bd:0f:12:0b epair0a: link state changed to UP epair0b: link state changed to UP epair0a: link state changed to DOWN epair0b: link state changed to DOWN failed: atf-check failed; see the output of the test for details [6.197s] sys/netpfil/pf/sctp:nat_v4 -> epair0a: Ethernet address: 02:c7:62:46:c7:0a epair0b: Ethernet address: 02:c7:62:46:c7:0b epair0a: link state changed to UP epair0b: link state changed to UP epair1a: Ethernet address: 02:8c:43:12:d9:0a epair1b: Ethernet address: 02:8c:43:12:d9:0b epair1a: link state changed to UP epair1b: link state changed to UP epair1a: link state changed to DOWN epair1b: link state changed to DOWN epair0a: link state changed to DOWN epair0b: link state changed to DOWN failed: atf-check failed; see the output of the test for details [11.255s] sys/netpfil/pf/sctp:nat_v6 -> epair0a: Ethernet address: 02:1d:c9:d4:65:0a epair0b: Ethernet address: 02:1d:c9:d4:65:0b epair0a: link state changed to UP epair0b: link state changed to UP epair1a: Ethernet address: 02:b3:4e:20:1f:0a epair1b: Ethernet address: 02:b3:4e:20:1f:0b epair1a: link state changed to UP epair1b: link state changed to UP epair1a: link state changed to DOWN epair1b: link state changed to DOWN epair0a: link state changed to DOWN epair0b: link state changed to DOWN failed: atf-check failed; see the output of the test for details [0.173s] sys/netpfil/pf/sctp:pfsync -> bridge0: Ethernet address: de:42:89:18:b1:dd bridge1: Ethernet address: b2:86:ef:a3:ef:31 epair0a: Ethernet address: 02:54:4e:ee:3c:0a epair0b: Ethernet address: 02:54:4e:ee:3c:0b epair0a: link state changed to UP epair0b: link state changed to UP epair1a: Ethernet address: 02:78:52:40:f7:0a epair1b: Ethernet address: 02:78:52:40:f7:0b epair1a: link state changed to UP epair1b: link state changed to UP epair2a: Ethernet address: 02:b9:26:02:ad:0a epair2b: Ethernet address: 02:b9:26:02:ad:0b epair2a: link state changed to UP epair2b: link state changed to UP epair3a: Ethernet address: 02:40:39:a9:43:0a epair3b: Ethernet address: 02:40:39:a9:43:0b epair3a: link state changed to UP epair3b: link state changed to UP epair4a: Ethernet address: 02:b6:a8:30:81:0a epair4b: Ethernet address: 02:b6:a8:30:81:0b epair4a: link state changed to UP epair4b: link state changed to UP epair5a: Ethernet address: 02:91:3c:cf:90:0a epair5b: Ethernet address: 02:91:3c:cf:90:0b epair5a: link state changed to UP epair5b: link state changed to UP epair6a: Ethernet address: 02:c4:6b:1f:38:0a epair6b: Ethernet address: 02:c4:6b:1f:38:0b epair6a: link state changed to UP epair6b: link state changed to UP epair0a: promiscuous mode enabled epair1a: promiscuous mode enabled epair2a: promiscuous mode enabled bridge0: link state changed to UP epair6a: promiscuous mode enabled epair4a: promiscuous mode enabled epair5a: promiscuous mode enabled bridge1: link state changed to UP epair1b: promiscuous mode enabled epair4b: promiscuous mode enabled carp: demoted by 240 to 240 (pfsync bulk start) epair2b: promiscuous mode enabled epair5b: promiscuous mode enabled carp: demoted by 240 to 240 (pfsync bulk start) carp: demoted by 50 to 290 (sysctl) carp: demoted by -240 to 0 (pfsync bulk done) carp: demoted by -240 to 50 (pfsync bulk done) epair0b: link state changed to DOWN epair0a: link state changed to DOWN carp: demoted by 240 to 240 (interface down) epair1b: link state changed to DOWN epair1a: link state changed to DOWN carp: demoted by 240 to 480 (interface down) epair4b: link state changed to DOWN epair4a: link state changed to DOWN epair3a: link state changed to DOWN epair3b: link state changed to DOWN carp: demoted by 240 to 290 (interface down) epair2b: link state changed to DOWN epair2a: link state changed to DOWN bridge0: link state changed to DOWN carp: demoted by 240 to 530 (interface down) epair5b: link state changed to DOWN epair5a: link state changed to DOWN epair6b: link state changed to DOWN epair6a: link state changed to DOWN bridge1: link state changed to DOWN failed: atf-check failed; see the output of the test for details [13.483s] sys/netpfil/pf/sctp:rdr_v4 -> epair0a: Ethernet address: 02:84:15:94:8c:0a epair0b: Ethernet address: 02:84:15:94:8c:0b epair0a: link state changed to UP epair0b: link state changed to UP epair1a: Ethernet address: 02:1f:e7:bb:41:0a epair1b: Ethernet address: 02:1f:e7:bb:41:0b epair1a: link state changed to UP epair1b: link state changed to UP epair1a: link state changed to DOWN epair1b: link state changed to DOWN epair0a: link state changed to DOWN epair0b: link state changed to DOWN failed: SCTP connection failed [4.283s] sys/netpfil/pf/sctp:related_icmp -> epair0a: Ethernet address: 02:04:1e:df:73:0a epair0b: Ethernet address: 02:04:1e:df:73:0b epair0a: link state changed to UP epair0b: link state changed to UP epair1a: Ethernet address: 02:b3:5b:57:f3:0a epair1b: Ethernet address: 02:b3:5b:57:f3:0b epair1a: link state changed to UP epair1b: link state changed to UP epair2a: Ethernet address: 02:ec:68:d1:af:0a epair2b: Ethernet address: 02:ec:68:d1:af:0b epair2a: link state changed to UP epair2b: link state changed to UP epair0b: link state changed to DOWN epair0a: link state changed to DOWN epair1a: link state changed to DOWN epair1b: link state changed to DOWN epair2a: link state changed to DOWN epair2b: link state changed to DOWN failed: atf-check failed; see the output of the test for details [11.294s] sys/netpfil/pf/sctp:reuse -> epair0a: Ethernet address: 02:1d:b8:26:be:0a epair0b: Ethernet address: 02:1d:b8:26:be:0b epair0a: link state changed to UP epair0b: link state changed to UP epair0a: link state changed to DOWN epair0b: link state changed to DOWN failed: atf-check failed; see the output of the test for details [11.175s] sys/netpfil/pf/sctp:timeout -> passed [0.081s] sys/netpfil/pf/sctp.py:TestSCTP::test_allow_related -> epair0a: Ethernet address: 02:5a:0c:97:03:0a epair0b: Ethernet address: 02:5a:0c:97:03:0b epair0a: link state changed to UP epair0b: link state changed to UP lo0: link state changed to UP lo0: link state changed to UP epair0a: link state changed to DOWN epair0b: link state changed to DOWN failed: /usr/tests/sys/netpfil/pf/sctp.py:173: Exception [243.565s] sys/netpfil/pf/sctp.py:TestSCTP::test_disallow_related -> epair0a: Ethernet address: 02:55:a4:33:01:0a epair0b: Ethernet address: 02:55:a4:33:01:0b epair0a: link state changed to UP epair0b: link state changed to UP lo0: link state changed to UP lo0: link state changed to UP epair0a: link state changed to DOWN epair0b: link state changed to DOWN broken: Test case body timed out [4760.153s] sys/netpfil/pf/sctp.py:TestSCTP::test_limit_addresses -> epair0a: Ethernet address: 02:cd:33:9d:2a:0a epair0b: Ethernet address: 02:cd:33:9d:2a:0b epair0a: link state changed to UP epair0b: link state changed to UP lo0: link state changed to UP lo0: link state changed to UP + rc=0 + echo 'bhyve return code = 0' bhyve return code = 0 + sudo /usr/sbin/bhyvectl '--vm=testvm-14-amd64-1810' --destroy + sh -ex freebsd-ci/scripts/test/extract-meta.sh + METAOUTDIR=meta-out + rm -fr meta-out + mkdir meta-out + tar xvf meta.tar -C meta-out x ./ x ./run-kyua.sh x ./disable-notyet-tests.sh x ./run.sh x ./disable-dtrace-tests.sh x ./auto-shutdown x ./disable-zfs-tests.sh + rm -f 'test-report.*' + mv 'meta-out/test-report.*' . mv: rename meta-out/test-report.* to ./test-report.*: No such file or directory + report=test-report.xml + [ -e freebsd-ci/jobs/FreeBSD-stable-14-amd64-test/xfail-list -a -e test-report.xml ] + rm -f disk-cam + jot 5 + rm -f disk1 + rm -f disk2 + rm -f disk3 + rm -f disk4 + rm -f disk5 + rm -f disk-test.img [PostBuildScript] - [INFO] Executing post build scripts. [FreeBSD-stable-14-amd64-test] $ /bin/sh -xe /tmp/jenkins13852867589780511768.sh + ./freebsd-ci/artifact/post-link.py Post link: {'job_name': 'FreeBSD-stable-14-amd64-test', 'commit': '0280fef4ba5e3baeac7511deea50b91466a69e95', 'branch': 'stable-14', 'target': 'amd64', 'target_arch': 'amd64', 'link_type': 'latest_tested'} "Link created: stable-14/latest_tested/amd64/amd64 -> ../../0280fef4ba5e3baeac7511deea50b91466a69e95/amd64/amd64\n" Recording test results ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error? Checking for post-build Performing post-build step Checking if email needs to be generated Email was triggered for: Failure - Any Sending email for trigger: Failure - Any Sending mail from default account using System Admin e-mail addresshome | help
Want to link to this message? Use this
URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1757119162.291.1771375908328>