Date: Fri, 8 Dec 2000 10:17:25 -0800 (PST) From: Gorden Fischer <gfish123@pacbell.net> To: mobile@freebsd.org Subject: EXPNET PCMCIA CDROM is not working (fwd) Message-ID: <Pine.BSF.4.21.0012081016270.75948-100000@uniqsite.com>
next in thread | raw e-mail | index | archive | help
Hi!
Can someone help me with the following. I recently aquired a 24X
PCMCIA CDROM drive (Model cd940-24) According to the Tuple, entry #2 is
for the device.
The CDROM pcmcia card is detected in the booting process, but the driver
failed to load by pccardd. Pccardd says:
No card in database for "EXP "("CD-ROM")
BTW, the laptop is a Sony z505s.
===========================================================
Script started on Fri Dec 8 09:08:28 2000
%uname -a
FreeBSD sony.pacbell.net 5.0-20000928-CURRENT FreeBSD 5.0-20000928-CURRENT #5: Sun Oct 1 21:31:08 PDT 2000 root@sony.pacbell.net:/usr/src/sys/compile/Sony i386
%pccardc dumpcis
Configuration data for card in slot 0
Tuple #1, code = 0x1 (Common memory descriptor), length = 3
000: 00 00 ff
Common memory device information:
Device number 1, type No device, WPS = OFF
Speed = No speed, Memory block size = 512b, 1 units
Tuple #2, code = 0x15 (Version 1 info), length = 20
000: 04 01 45 58 50 20 20 20 00 43 44 2d 52 4f 4d 00
010: 49 33 00 ff
Version = 4.1, Manuf = [EXP ], card vers = [CD-ROM]
Addit. info = [I3]
Tuple #3, code = 0x1a (Configuration map), length = 5
000: 01 03 00 01 03
Reg len = 2, config register addr = 0x100, last config = 0x3
Registers: XX------
Tuple #4, code = 0x1b (Configuration entry), length = 14
000: c3 81 18 ca 61 68 01 07 6e 03 01 30 b8 9e
Config index = 0x3(default)
Interface byte = 0x81 (I/O) wait signal supported
Card decodes 10 address lines, limited 8/16 Bit I/O
I/O address # 1: block start = 0x168 block length = 0x8
I/O address # 2: block start = 0x36e block length = 0x2
IRQ modes: Level
IRQs: 3 4 5 7 9 10 11 12 15
Tuple #5, code = 0x1b (Configuration entry), length = 10
000: 02 08 ca 61 e8 01 07 ee 03 01
Config index = 0x2
Card decodes 10 address lines, limited 8/16 Bit I/O
I/O address # 1: block start = 0x1e8 block length = 0x8
I/O address # 2: block start = 0x3ee block length = 0x2
Tuple #6, code = 0x1b (Configuration entry), length = 10
000: 01 08 ca 61 70 01 07 76 03 01
Config index = 0x1
Card decodes 10 address lines, limited 8/16 Bit I/O
I/O address # 1: block start = 0x170 block length = 0x8
I/O address # 2: block start = 0x376 block length = 0x2
Tuple #7, code = 0x40 (Version 2 Info), length = 19
000: 00 41 52 47 4f 53 59 00 52 45 53 45 41 52 43 48
010: 00 34 00
Version = 0x0, compliance = 0x41, dindex = 0x4752
Vspec8 = 0x59, vspec9 = 0x0, nhdr = 82
Vendor = [ESEARCH], info = [4]
Tuple #8, code = 0x14 (No link), length = 0
Tuple #9, code = 0xff (Terminator), length = 0
1 slots found
%cat pccard.conf
# Default PCCARD configuration file
#
# Removing all IRQ conflicts from this file can't be done because of some
# IRQ-selfish PC-cards. So if you want to use some of these cards in
# your machine, you will be forced to modify their IRQ parameters from
# the following list.
#
# IRQ == 0 means "allocate free IRQ from IRQ pool"
# IRQ == 16 means "do not use IRQ (e.g. PIO mode)"
#
# $FreeBSD: src/etc/defaults/pccard.conf,v 1.130 2000/09/26 06:39:47 sanpei Exp $
#
# Send new entries for this file to imp@freebsd.org. He's volunteered
# to act as coordinator for this file.
#
# Generally available IO ports
io 0x240-0x360
# Generally available IRQs (Built-in sound-card owners remove 5)
irq 3 5 10 11 15
# Available memory slots
memory 0xd4000 96k
# Include user configration file
# This allow you to override or add configurations.
include /etc/pccard.conf
#
# PLEASE KEEP THIS FILE IN ORDER
#
# In order is defined as follows. We sort first by driver type (an, ed, etc)
# and then by CIS strings. Do not commit to this file entries out of
# order.
#
########## aic ##########
# Adaptec SlimSCSI (also included with Sony CD-ROM players)
card "Adaptec, Inc." "/APA-1460 .*/"
config 0x9 "aic" ?
insert camcontrol rescan $device
# NewMedia Bustoaster SCSI
card "New Media" "SCSI"
config 0x22 "aic" ?
insert camcontrol rescan $device
########## an ##########
# Aironet PC4500 2Mbps 802.11 wireless NIC
card "Aironet" "PC4500"
config 0x5 "an" ?
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
# Aironet PC4800 11Mbps 802.11 wireless NIC
card "Aironet" "PC4800"
config 0x5 "an" ?
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
# Aironet 340/342 Series 11Mbps 802.11 wireless NIC
card "Cisco Systems" "340 Series Wireless LAN Adapter"
config auto "an" ?
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
########## ata ##########
# Sony VAIO cdrom, Ninja-ATA CD-ROM Drive, MELCO CDN-D12EX
card " " "NinjaATA-"
config auto "ata" ?
logstr "NinjaATA"
# Non-brand Compact Flash Card(32MB)
card " " "KCF 32M"
config 0x1 "ata" ? iosize 16
logstr "Compact Flash Card 32M"
# Caravelle PSC-IDE 6x ATAPI CD-ROM
card "Caravelle" "PSC-IDE "
config 0x2a "ata" ? # 0x1 (flags for wd, not sure for ata)
# <Vendor Unknown> MCD-601p 6x CD-ROM drive.
card "CDROM" "IDE"
config auto "ata" ?
logstr "MCD-601p"
# DATAFAB PCMMD2
card "DATAFAB" "PCMCIA-TO-IDE"
config 0x1 "ata" ?
# DHU Mobile Media CD-ROM
# (no hotplug support)
card "Digital Equipment Corporation." "Digital Mobile Media CD-ROM"
config 0xb "ata" 15
!
! This is the entry, modified.
!
# EXP CDROM drive
card "EXP " "CDROM"
#card "EXP " "PnPIDE"
config auto "ata" ?
# Toshiba mobile CD-ROM (Bundled with Portege 3110CT)
card "FREECOM" "PCCARD-IDE"
config auto "ata" ? iosize 16
# FUJITSU FlashDiskCard ZEBO-ATA40
card "FUJITSU" "ZEBO-ATA"
config 0x03 "ata" ?
# Greystone Diskdock
card "GREYSTONE PERIPHERAL DISKDOCK" "/.*/"
config default "ata" ?
# HAGIWARA FLASH
card "HAGIWARA" "FLASH"
config default "ata" ?
# Hitachi Flash ATA
card "HITACHI" "/.*FLASH.*/"
config 0x01 "ata" ? iosize 16
# IBM Flash ATA (Ricoh Flash ATA 10MB)
card "IBM" "IBM17JSSFP10"
config auto "ata" ? iosize 16
# XXX NOT SURE SUPPORTED
# IBM Portable 4X Speed CD-ROM Drive CD-400
#card "IBM" "PCMCIA CD-ROM Drive CD-400"
# config 0x1 "ata" ? iosize 0x20 # 0x10000 (flags for wd, not sure for ata)
# IBM CD-20XSeries(IDE PC Card)
card "IBM" "PCMCIA Portable CD-ROM Drive"
config auto "ata" ? iosize 0x1
# IBM Microdrive (CF+ Type II)
card "IBM" "microdrive"
# config 0x03 "ata" ?
config 0x01 "ata" ? iosize 16
# Integral Peripherals Viper HDD Series
card "INTEGRAL PERIPHERALS" "ATA CARD"
# config default "ata" ?
config 0x01 "ata" ? iosize 16
# IO DATA PCMF144/20 (as Flash ATA only)
card "IO DATA" "ATA&MODEM"
config 0x7 "ata" ?
# IO DATA CBIDE2 in 16 bit mode
# (bundled with IO DATA CDP-AX24T, Panasonic DVD-ROM LK-RV8171D)
card "IO DATA" "CBIDE2"
config default "ata" ?
# IO Data PCIDE-II (bundled with CDP-TX6, etc.)
card "IO DATA" "PCIDEII"
config auto "ata" ?
# Iomega Zip Drive
card "Iomega" "PCMCIA to 16 bit ATAPI Adapter"
config 0x2 "ata" ?
# KODAK Picture Card
card "KODAK Picture Card" "KODAK"
config default "ata" ?
# TOSHIBA Portable 24X Speed CD-ROM Drive PA2673UJ
card "LOOKMEET" "CBIDE2"
config default "ata" ?
# Maxtor ATA HDD
card "Maxtor" "/MXL.*/"
config 0x03 "ata" ?
# Microtech XpressDock
card "Microtech International Inc." "IDE PCCARD"
config auto "ata" ? 0x20000 iosize 16
# Midori Elec. Flash ATA
card "Midori Elec." "/.*FLASH.*/"
config 0x03 "ata" ?
# LK-RM120
card "Panasonic" "LMEK0406"
config 0x22 "ata" ? 0x1
# Another boring, generic ata atapter
card "PC CARD MANUFACTURER" "PCMCIA ATA/ATAPI Adapter"
config auto "ata" ?
# pc-card from PSCD-740 cdrom
card "PCMCIA" "CD-ROM"
config 0x1 "ata" ?
# Shining PMIDE-ASC CDROM / Road Warrior Bullet Disk
card "Shining" "PMIDE-ASC"
config auto "ata" ? 0x20000
# Microtech PortableDRIVE25/PCMCIA
card "SHUTTLE TECHNOLOGY LTD." "PCCARD-IDE/ATAPI Adapter"
config auto "ata" ? 0x20000
# XXX NOT SURE SUPPORTED
# CitiDISK & Addonics PocketZIP
#card "Shining" "PMIDE-ASC"
# config default "ata" ? # 0x20000 (flags for wd, not sure for ata)
# Sicon Peripheral PCMCIA ATA/ATAPI Adapter
card "Sicon Peripheral" "PCMCIA ATA/ATAPI Adapter"
config default "ata" ?
# SiliconTech,Inc. Compact PC Card
card "SiliconTech,Inc." "/[0-9]*MB Compact PC Card/"
config 0x1 "ata" ?
# Simple Technology ata flash
card "Simple Technology " "STI-ATA"
config 0x2 "ata" ?
# SONY Memory Stick PC Card Adaptor
card "SONY" "/MEMORYSTICK.*/"
config 0x01 "ata" ?
iosize 16
# SunDisk Flash ATA
# (OEM: Epson Flash Packer)
card "SunDisk" "/.*/"
config 0x1 "ata" ?
# TDK Flash ATA
card "TDK TC_H." "/.*/"
config 0x1 "ata" ?
# IO Data CBIDE (bundled with CDP-FX24, etc.)
card "WIT" "IDE16"
config auto "ata" ?
# LIP-32B attached to Logitec LCW-PD648PI
card "WORKBIT" "ATA-32Bi(16)"
config default "ata" ?
# Viking ATA Flash card
card "VIKING ATA/CF FLASH CARD " "TOR/AM "
config 0x2 "ata" ?
########## awi ##########
# Generic AMD Am79c930 based card
card "AMD" "Am79C930"
config 0x1 "awi" ?
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
card "Bay Networks" "BayStack 650 Wireless LAN"
config 0x1 "awi" ?
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
card "Farallon" "SkyLINE Wireless"
config default "awi" ?
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
card "Icom" "SL-200"
config 0x1 "awi" ?
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
########## cnw ##########
# XXX NOT SUPPORTED YET
# NetWave AirSurfer
# NOTE: For some machines, wait cycle for memory access is required.
# you should change "0x40" on the last part of "cardmem" line to "0x44",
# like:
# cardmem 0xd4000 0x20000 0x9000 0x44
# IBM ThinkPads are known to require this change.
#card "Xircom" "CreditCard Netwave"
# config 0x01 "cnw" ?
# cardmem 0xd4000 0x20000 0x9000 0x40
# config 0x01 "cnw" ?
## cardmem 0xdd000 0x20000 0x9000 0x40
# ether 0x126 00:80:c7 00:20:d8
# insert /etc/pccard_ether $device
# remove /sbin/ifconfig $device delete
########## ed ##########
# No-brand NE2000 compatible card (FCC ID: LXLC1LANTB)
card " " "Ethernet Combo card"
config auto "ed" ? 0x10
logstr "NE2000 compatible card"
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
# Map Japan MPL-972
card "2408LAN" "Ethernet"
config auto "ed" ?
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
# Accton EN2212
# Very slow! (PIO mode)
card "ACCTON" "EN2212"
config 0x1 "ed" ? 0x10
ether 0xff0
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
#Accton 2216
card "ACCTON" "EN2216-PCMCIA-ETHERNET"
config 0x20 "ed" ?
# config auto "ed" ?
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
# Allied Telesis CentreCOM LA100-PCM-T V2
card "Allied Telesis, K.K" "CentreCOM LA100-PCM-T V2 100/10M LAN PC Card"
config auto "ed" ?
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
# Allied Telesis Ethernet Card
card "Allied Telesis,K.K" "Ethernet LAN Card"
config 0x1 "ed" ? 0x10
ether 0xff0
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
# Allied Telesis CentreCOM LA-PCM_V2 ethernet card
# NTT-DATA ASTROWINK-M/MMOIL(IrLAN) ethernet card
card "Allied Telesis, K.K." "CentreCOM LA-PCM_V2"
config 0x20 "ed" ?
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
# Allied Telesis CentreCOM LA100-PCM-T V2
card "Allied Telesis, K.K." "CentreCOM LA100-PCM-T V2 100/10M LAN PC Card"
config auto "ed" ?
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
# Allied Telesis CentreCOM LA-PCM V3
card "Allied Telesis K.K." "LA-PCM V3"
config auto "ed" ? 0x10
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
# AmbiCom 10BaseT card
card "AmbiCom Inc" "AMB8002T"
config 0x20 "ed" ?
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
# Billionton LNT-10TB
card "Billionton" "LNT-10TB"
config auto "ed" ?
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
# CNet BC40 adapter
card "CNet" "CN40BC Ethernet"
config 0x20 "ed" ?
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
# COREGA Ether PCC-T
card "corega K.K." "corega Ether PCC-T"
config 0x20 "ed" ?
# config auto "ed" ?
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
# COREGA EtherII PCC-T
card "corega K.K." "corega EtherII PCC-T"
config 0x20 "ed" ?
# config auto "ed" ?
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
# COREGA FastEther PCC-TX
card "corega K.K." "corega FastEther PCC-TX"
config auto "ed" ?
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
# Corega PCM-T
card "Corega,K.K." "Ethernet LAN Card"
config auto "ed" ?
ether 0xff0
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
# CyQ've ELA-010
card "CyQ've" "ELA-010"
config 0x20 "ed" ?
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
# CyQ've ELA-110
card "CyQ've" "ELA-110 10/100M LAN Card"
config auto "ed" ?
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
# CyQ've ELA-110E
card "CyQ've" "ELA-110E 10/100M LAN Card"
config auto "ed" ?
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
# D-Link DE-650 NE2000 clone
card "D-Link" "DE-650"
config 0x20 "ed" ? 0x10
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
# D-Link DE-660 NE2000 clone
card "D-Link" "DE-660"
config 0x20 "ed" ? 0x10
ether 0x81
# insert /etc/pccard_ether $device link0 -link1
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
# D-Link DFE-650 NE2000 clone
card "D-Link" "DFE-650"
config 0x20 "ed" ? 0x10
insert /etc/pccard_ether $device
# insert /etc/pccard_ether $device link0 -link1
remove /sbin/ifconfig $device delete
# D-Link DME-560T LAN/FAX/MODEM Card (as Ethernet)
card "D-Link" "DME560T"
config default "ed" ?
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
# Danpex (Alloy, etc.) EN-6200P2
card "DANPEX" "EN-6200P2"
config 0x22 "ed" ?
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
# Dayna Communications CommuniCard E
card "Dayna Communications, Inc." "CommuniCard E"
config auto "ed" ? 0x10
# ether 0x110 00:80:19
ether 0x110
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
# Digital DEPCM-BA Ethernet
card "DIGITAL" "DEPCM-XX"
config auto "ed" ? 0x10
# ether 0xff0 00:00:e8
ether 0xff0
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
# Planex FNW-3600-T
card "Dual Speed" "10/100 PC Card"
config auto "ed" ?
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
# Planex FNW-3600-TX 16bit FastEthernet DirectDock
card "Dual Speed" "10/100 Port Attached PC Card"
config auto "ed" ?
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
# LinkSys ethernet card
card "E-CARD" "E-CARD"
config 0x20 "ed" ?
logstr "LinkSys card"
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
# Eiger Labs Ethernet COMBO
card "EIGER Labs Inc." "Ethernet COMBO Card"
config auto "ed" ? 0x10
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
# XXX Compex Net-A adapter, Telecom SuperSocket RE450T and
# Apollo PCMCIA Ethernet Adapter have same manufacturer and
# card version string. They should be distinguished by
# other info. (such as additional information or OEM-ID/product-ID).
# Compex Net-A adapter
card "Ethernet" "Adapter"
config 0x1 "ed" ?
ether 0xff0
logstr "Compex Net-A adapter"
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
# Telecom Device SuperSocket RE450T
# Note: There are several revisions of the cardon the market.
# Type A needs no "ether" line.
# Type B needs "ether 0x110" line.
# Type C needs "ether 0xff0" line.
# Yet more revisions exist, reportedly.
# If you see strange MAC address shown by ifconfig command,
# try other config.
card "Ethernet" "Adapter"
config 0x2 "ed" ?
# ether 0x110 00:e0:98
# ether 0xff0 00:e0:98
logstr "Telecom SuperSocket RE450T"
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
# Apollo PCMCIA Ethernet Adapter
card "Ethernet" "Adapter"
config 0x0 "ed" ?
logstr "Apollo PCMCIA Ethernet Adapter"
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
# "Ethernet Adapter" "E2000 PCMCIA Ethernet"
card "Ethernet Adapter" "E2000 PCMCIA Ethernet"
config auto "ed" ?
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
# ADDTRON EP-210A
card "EP-210 PCMCIA LAN CARD." "/.*/"
config auto "ed" ? 0x10
# ether 0x110 00:40:33
ether 0x110
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
# PLANEX (PLANET) FNW-3700-T
card "Fast Ethernet" "16-bit PC Card"
config auto "ed" ? 0x30000
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
# Planex FNW-3600-T 16bit FastEthernet
card "Fast Ethernet" "Adapter"
config 0x7 "ed" ?
iosize 32
logstr "Planex FNW-3600-T"
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
# Grey Cell GCS2220 Ethernet Card
card "Grey Cell" "GCS2220"
config auto "ed" ? 0x10
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
# GVC NIC-2000P Ethernet Card
card "GVC" "NIC-2000p"
config auto "ed" ? 0x10
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
# IBM PCMCIA Ethernet I/II
card "IBM Corp." "Ethernet"
config 0x1 "ed" ?
ether 0xff0
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
#AR-P500 ethernet card
card "IC-CARD" "IC-CARD"
config 0x20 "ed" ?
logstr "AR-P500 Ethernet card"
insert /etc/pccard_ether $device
remove ifconfig $device delete
# IC-CARD+ Ethernet card
card "IC-CARD+" "IC-CARD+"
config auto "ed" ?
logstr "IC-CARD+ Ethernet card"
insert /etc/pccard_ether $device
remove ifconfig $device delete
# I/O DATA PCLA/T
card "I-O DATA" "PCLA"
config auto "ed" ? 0x10
# ether 0x1c0 00:a0:b0
# ether 0xff0 00:a0:b0
ether 0xff0
insert /etc/pccard_ether $device
remove ifconfig $device delete
# I-O DATA PCLATE
card "IO DATA" "PCLATE"
config 0x20 "ed" ? 0x10
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
# I-O DATA PCETTX
card "IO DATA" "PCETTX"
config 0x20 "ed" ?
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
# KANSAI ELECTRIC KLA-PCM/T
card "KANSAI ELECTRIC CO.,LTD" "KLA-PCM/T"
config 0x1 "ed" 15
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
# Kingston KNE-PC2
card "Kingston" "KNE-PC2"
config default "ed" ?
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
# Kingston KNE-PCM/x Ethernet
card "Kingston Technology Corp." "/EtheRx PC Card Ethernet.*/"
config auto "ed" ?
ether 0xff0
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
# ELECOM Laneed LD-10/100CD
card "Laneed" "LD-10/100CD"
config auto "ed" ?
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
# Elecom Laneed LD-CDF
card "Laneed" "LD-CDF"
config 0x20 "ed" ?
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
# ELECOM Laneed LD-CDS
card "Laneed" "LD-CDS"
config auto "ed" ?
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
# Linksys Combo PCMCIA EthernetCard (model EC2T on box)
card "Linksys" "Combo PCMCIA EthernetCard (EC2T)"
config 0x1 "ed" ?
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
# Linksys Combo PCMCIA Ethernet Card
card "LINKSYS" "E-CARD"
config auto "ed" ? 0x10
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
# Linksys EtherFast 10/100 Intergrated PC Card (PCM100)
card "Linksys" "EtherFast 10/100 Integrated PC Card (PCM100)"
config auto "ed" ?
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
#Linksys EtherFast 10/100 PC Card (PCMPC100)
card "Linksys" "EtherFast 10/100 PC Card (PCMPC100)"
config 0x3 "ed" ?
# config auto "ed" ?
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
# Logitec LPM-LN100TX 100BASE-TX Ethernet LAN CARD
card "Logitec" "LPM-LN100TX"
config auto "ed" ?
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
# Logitec LPM-LN20T
card "Logitec" "LPM-LN20T"
config auto "ed" ?
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
# Socket LP-E (WinCE Low Power Ethernet)
card "Low Power Ethernet LAN Adapter" "Socket Communications, Inc"
config 0x20 "ed" ?
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
# ELECOM Laneed LD-CDWA (DP83902A)
card "MACNICA" "ME1-JEIDA"
config auto "ed" ?
# ether 0xb8 08:00:42
ether 0xb8
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
# Matsushita Electric Industrial Co.,LTD. CF-VEL211P-B
card "Matsushita Electric Industrial Co.,LTD." "CF-VEL211"
config auto "ed" ?
# ether 0xff0 00:80:45
ether 0xff0
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
# MELCO LPC2-T
card "MELCO" "LPC2-T"
config auto "ed" ?
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
# MELCO LPC2-TX
card "MELCO" "LPC2-TX"
config auto "ed" ?
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
# Melco LPC-T (PIO mode)
card "MELCO" "LPC3-TX"
config 0x1 "ed" ? 0x30000
ether 0xff0
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
# National Semiconductor InfoMover 4100
card "National Semiconductor" "InfoMover 4100"
config auto "ed" ?
# ether 0xff0 08:00:17
ether 0xff0
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
# National Semiconductor InfoMover NE4100
card "National Semiconductor" "InfoMover NE4100"
config 0x1 "ed" ?
ether 0xff0
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
# NDC Ethernet Instant-Link NE2000 clone
card "NDC" "Ethernet"
config 0x22 "ed" ? 0x10
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
# NEC PC-9801N-J12
card "NEC" "PC-9801N-J12"
config auto "ed" ?
# ether 0xff0 00:00:4c
ether 0xff0
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
# BayNetworks NETGEAR FA410TXC Fast Ethernet
card "NETGEAR" "FA410TX"
config auto "ed" ?
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
# Network Everywhere Ethernet 10BaseT PC Card
card "Network Everywhere" "Ethernet 10BaseT PC Card"
config 0x1 "ed" ?
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
# Network Everywhere Ethernet Fast Ethernet 10/100 PC Card
card "Network Everywhere" "Fast Ethernet 10/100 PC Card"
config 0x5 "ed" 10
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
# New Media Corporation LiveWire 10/100
card "New Media Corporation" "LiveWire 10/100"
config auto "ed" ?
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
# NextCom Next Hawk Etherneet Adapter
card "NextCom K.K." "Next Hawk"
config auto "ed" ?
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
# Nihon Unisys, Ltd. JPF0400-ETH
card "Nihon Unisys, Ltd." "JPF0400-ETH"
config auto "ed" ?
# ether 0xff0 00:80:45
ether 0xff0
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
# Nihon Unisys, Ltd. JPF0400-LAN
card "Nihon Unisys, Ltd." "JPF0400-LAN"
config auto "ed" ?
# ether 0xff0 00:80:45
ether 0xff0
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
# No-brand NE-2000 compatible card
card "PCMCIA" "ETHERNET V1.0"
config auto "ed" ? 0x10
ether 0xff0
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
# Telecom Device SuperSocket HPC100
card "PCMCIA" "FastEthernet"
config auto "ed" ? 0x30000
logstr "Telecom Device SuperSocket HPC100"
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
# Billionton 10Base-TX ETHERNET PCCARD (aka UE2216)
# Also Genuius "Ethernet ME3000II SE"
card "PCMCIA" "PCMCIA-ETHERNET-CARD"
config 0x20 "ed" ? 0x10
logstr "UE2216"
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
# Melco LPC-T (PIO mode)
card "PCMCIA" "UE2212"
config 0x1 "ed" ? 0x10
ether 0xff0
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
# EXPsys PCMCIA Ethernet Combo, Relia PCMCIA Ethernet
card "PCMCIA LAN" "Ethernet"
config auto "ed" ?
logstr "EXPsys Ethernet"
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
# LinkMates LM 336 LAN Fax/Modem PC Card
card "PCMCIAs" "ComboCard"
config 0x24 "ed" ? 0x10
logstr "LinkMates LM 336"
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
# Telecom Device SuperSocket LM336 (as Ethernet only)
card "PCMCIAs" "LanModem"
config default "ed" ?
logstr "SuperSocket LM336"
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
# PreMax PE-200 Ethernet Card
card "PMX " "PE-200"
config auto "ed" ? 0x10
# ether 0x7f0 00:20:e0
ether 0x7f0
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
# Psion Dacom Gold Card V34 Ethernet GSM
# as ethernet
card "Psion Dacom" "Gold Card V34 Ethernet GSM"
config default "ed" ?
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
# RIOS PC CARD3 ETHERNET
card "RIOS Systems Co." "PC CARD3 ETHERNET"
config auto "ed" ?
# ether 0xff0 00:00:48
ether 0xff0
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
# RPTI EP401 Ethernet card
card "RPTI" "EP401 Ethernet NE2000 Compatible"
config 0x22 "ed" 9
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
# SCM Ethernet Combo (*Not SMC :-)*)
card "SCM" "Ethernet Combo card"
config auto "ed" ? 0x10
# ether 0xff0 00:20:cb
ether 0xff0
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
# Epson EEN10B Ethernet Card
card "Seiko Epson Corp." "Ethernet"
config auto "ed" ? 0x10
# ether 0xff0 00:00:48
ether 0xff0
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
# 3way 3WL-847-TX
card "SUN WAY" "3WL-847-TX 100BASE-TX"
config auto "ed" ?
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
# Surecom EtherPerfect EP-427
card "TAMARACK" "Ethernet"
config 0x21 "ed" ?
insert /etc/pccard_ether $device
remove ifconfig $device delete
# Telecom Device SuperSocket RE450T and RE550T
card "Telecom Device K.K." "/SuperSocket RE[45]50T/"
config auto "ed" ?
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
# Toshiba Joho System PTJ-LAN/T
card "TJ" "Ethernet"
config auto "ed" ? 0x10
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
# Xircom CompactCard Ethernet 10 (CFE-10)
card "Xircom" "CompactCard Ethernet"
config auto "ed" ?
insert /etc/pccard_ether $device
remove ifconfig $device delete
########## ep ##########
# 3Com Fast Etherlink 3C574TX
card "3Com" "3C574-TX Fast EtherLink PC Card"
config 0x1 "ep" ? 0x1
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
# 3Com Megahertz 3CXEM556 (only lan side) doesn't work yet
card "3Com" "Megahertz 3CXEM556"
config 0x1 "ep" ? 0x1
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
# 3Com Megahertz 3CCFEM556BI, 3CXEM556B
# as ethernet
card "3Com" "/Megahertz 3C.*EM556/"
config default "ep" ? 0x1
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
# 3Com Megahertz 574B
card "3Com" "Megahertz 574B"
config 0x1 "ep" ? 0x1
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
# 3Com Etherlink III 3CXE589ET
card "3Com" "Megahertz 589E"
config 0x1 "ep" ?
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
# 3Com OfficeConnect 3CXSH572BT
card "3Com" "OfficeConnect 572B"
config 0x1 "ep" ? 0x1
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
# 3Com Etherlink III 3C562 (as Network)
# Don't think this will work.
#card "3Com Corporation" "3C562"
# config 0x9 "ep" ?
# insert /etc/pccard_ether $device -link0 link1
# remove /sbin/ifconfig $device delete
# 3Com Etherlink III 3C589B, 3C589C
card "3Com Corporation" "3C589"
config 0x1 "ep" ?
# config auto "ep" ?
insert /etc/pccard_ether $device -link0 link1
# insert /etc/pccard_ether $device link0 -link1
remove /sbin/ifconfig $device delete
# 3Com Etherlink III 3C589D
card "3Com Corporation" "3C589D"
config 0x1 "ep" ?
# config auto "ep" ?
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
# Farallon EtherMac
card "Farallon" "ENet"
config 0x1 "ep" ?
insert /etc/pccard_ether $device
# insert /etc/pccard_ether $device link0
remove /sbin/ifconfig $device delete
########## ex ##########
# Olicom OC2220
card "Olicom" "Ethernet"
config 0x1 "ex" ?
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
########## fe ##########
# CONTEC C-NET(PC)C Ethernet
card "CONTEC Co.,Ltd." "/C-NET\(PC\)C.*/"
config auto "fe" ?
# ether 0x58 00:80:4c
ether 0x58
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
# Fujitsu MBH10303 Ethernet PCMCIA
card "EAGLE Technology" "NE200 ETHERNET LAN MBH10303 "
config auto "fe" ?
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
# Eiger Labs EPX-10BT
card "Eiger labs,Inc." "EPX-10BT PC Card Ethernet 10BT"
config auto "fe" ?
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
# Fujitsu FMV-J182, FMV-J182A
card "FUJITSU" "LAN Card(FMV-J182)"
config auto "fe" ?
# These cards have same ID strings, and different MAC address
# locations.
# ether 0xf2c 00:00:0e #FMV-J182
# ether 0xf2c #FMV-J182
# ether 0x1cc 00:00:0e #FMV-J182A
ether 0x1cc #FMV-J182A
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
# Fujitsu Towa LA501 Ethernet
card "FUJITSU TOWA" "LA501"
config auto "fe" ? 0x10
# ether 0x332 00:00:0e
ether 0x332
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
# HITACHI HT-4840-11
card "HITACHI" "HT-4840-11"
config auto "fe" ?
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
# NextCom J Link NC5310
card "NextComK.K." "/NC5310 Ver1\.0.*/"
config auto "fe" ?
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
# RATOC REX-5588, REX-9822, REX-4886
card "PCMCIA LAN MBH10304 ES" " 01"
config auto "fe" ?
# ether 0x32c 00:c0:d0 # many minor revs....
# ether 0x328 00:c0:d0
# ether 0x200 00:c0:d0
ether 0x200
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
# Fujitsu MBH10302
card "PCMCIA MBH10302" "01"
config auto "fe" ?
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
# RATOC REX-R280
card "RATOC System Inc." "10BASE_T CARD R280"
config auto "fe" ?
# ether 0x1fc 00:c0:d0
ether 0x1fc
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
# TDK LAK-CD021, LAK-CD021A, LAK-CD021BX
card "TDK" "LAC-CD02x"
config auto "fe" ?
# These cards have same ID strings, and different MAC address
# locations.
#ether 0x92 00:80:98 # LAC-CD021, LAC-021A
#ether 0x96 00:80:98 # LAC-CD021BX
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
########## fdc ##########
# Libretto Floppy disk
card "Y-E DATA" "External FDD"
config 0x4 "fdc" ?
########## gp ##########
# XXX NOT SUPPORTED YET
# National Instruments PCMCIA-GPIB Cards
#card "National Instruments" "PCMCIA-GPIB"
# config default "gp" pio
########## hss ##########
# XXX NOT SUPPORTED YET
# Hitachi microcomputer speech synthesizer card
#card "/HITACHI MICROCOMPUTER SYSTEM LTD.*/" "MSSHVPC02"
# config default "hss" pio
########## joy ##########
# XXX NOT SUPPORTED YET
# IO DATA PCJOY
#card "IO DATA" "PCJOY"
# config default "joy" pio
## config 0x1 "joy" pio
## config 0x2 "joy" pio
########## ncv ##########
# XXX NOT SUPPORTED YET
# New Media Corporation BASICS SCSI
# (Do not put this entry under Bustoaster)
#card "BASICS by New Media Corporation" "SCSI Sym53C500"
# config 0x14 "ncv" ?
# XXX NOT SUPPORTED YET
# Media Intelligent SCSI-2 PC Card MSC-200
#card "EPSON" "SCSI-2 PC Card SC200"
# config 0x12 "ncv" ?
# XXX NOT SUPPORTED YET
# KME (TAXAN ICD-400PN, etc.)
#card "KME" "KXLC002"
# config 0x26 "ncv" ? 0xb4d00000
# XXX NOT SUPPORTED YET
# KME KXLC004
#card "KME" "KXLC004"
# config default "ncv" ? 0xb4d00001
# XXX NOT SUPPORTED YET
# IO DATA PCSC-DV
# Macnica Miracle SCSI mPS100
#card "MACNICA" "MIRACLE SCSI" "mPS100" "D.0"
# config 0x11 "ncv" ? 0xb6250000
# XXX NOT SUPPORTED YET
# Macnica Miracle SCSI-II mPS110
#card "MACNICA" "MIRACLE SCSI-II mPS110"
# config 0x15 "ncv" ? 0
# XXX NOT SUPPORTED YET
# NEC PC-9801N-J03R
#card "NEC" "PC-9801N-J03R"
# config 0x15 "ncv" ? 0
# XXX NOT SUPPORTED YET
# Qlogic Fast SCSI
#card "QLOGIC CORPORATION" "pc05"
# config 0x2f "ncv" ? 0x84d00000
# XXX NOT SUPPORTED YET
# RATOC REX-9530
#card "RATOC System Inc." "/SCSI2 CARD.*/"
# config auto "ncv" ? 0x84d00000
# XXX NOT SUPPORTED YET
# RATOC REX-5572 (as SCSI only)
#card "RATOC System Inc." "/SOUND/SCSI2 CARD.*/"
# config default "ncv" ? 0x84d00000
## cardio 0x640 0x10
# iosize 16
########## nsp ##########
# XXX NOT SUPPORTED YET
# WORKBIT Ninja SCSI series
#card "IO DATA" "CBSC16 "
# config default "nsp" ?
# XXX NOT SUPPORTED YET
# WORKBIT Ninja SCSI series
#card "WBT" "NinjaSCSI-3"
# config default "nsp" ?
# XXX NOT SUPPORTED YET
# WORKBIT Ninja SCSI series (PIO mode)
#card "WBT" "NinjaSCSI-3"
# config default "nsp" ? 0x1
########## opl ##########
# XXX NOT SUPPORTED YET
# RATOC REX-5570 Sound Card
#card "1195 RATOC System Inc." "REX5570 SOUND CARD"
# config default "opl" ?
########## scc ##########
# XXX NOT SUPPORTED YET
# IBM Smart Capture Card
#card "IBM Corp." "Video Capture"
# config default "scc" pio
# cardmem 0xd4000 0x0 0x8000
########## sio ##########
# 3Com/USR/MegaHertz 3CCM156
card "3COM" "3CCM156"
config 0x23 "sio" ?
# 3com/USR/Megahertz 3CCM556
card "3Com" "3CXM/3CCM556"
config 0x23 "sio" ?
# 3Com Etherlink III 3C562 (as Modem)
card "3Com Corporation" "3C562"
config 0x09 "sio" ?
# ADVANTECH COMpad-32/85 (dual port, but only one works)
card "ADVANTECH" "COMpad-32/85"
config auto "sio" ? 0x330
# AIWA PV-JF288
card "AIWA CO.,LTD." "PV-JF288 "
config 0x23 "sio" ?
# Apex Data 28.8 PC Card "MOBILE PLUS Cellular" modem.
card "AD PC_CARD" "RC288ACL"
config 0x22 "sio" ?
# config auto "sio" ?
# AIWA PV-JF3356
card "AIWA CO.,LTD. MODEM" "PV-JF3356"
config auto "sio" ? 0x40000
# APEX DATA MultiCard (as Modem only)
card "APEX DATA" "MULTICARD"
config 0xb "sio" ?
# Eiger 33.6 modem
card "AT&T" "V34+ Fax Modem"
config 0x23 "sio" ?
# AT&T Paradyne KeepInTouch 14.4 modem
card "AT&T Paradyne" "KeepInTouch Card"
config 0x23 "sio" ?
reset 1000
# BUG Linkboy D64K (ISDN)
card "BUG Inc." "Linkboy D64K"
config 0x23 "sio" ?
# NewMedia 14.4K FAX/Data Modem
card "CIRRUS LOGIC" "FAX MODEM"
config 0x23 "sio" ?
# COM1 SA
card "COM1 SA" "MC218 CARD"
config 0x3 "sio" ?
# COM1 SA
card "COM1 SA" "MC220 CARD"
config 0x3 "sio" ?
# Digiteam Expresso 14.4 Modem
card "Digiteam GmbH" "Expresso Modem"
config 0x24 "sio" ?
# Eicon DIVA T/A
# at@menu Config menu
# at>vc View current profile
# at>vd View troubleshooting information
card "Eicon Technology" "DIVA T/A"
config 0x5 "sio" ?
# Ericsson DC23 GSM modem card
card "ERICSSON" "Modem, DC23"
config 0x21 "sio" ?
# GATEWAY 2000 FAX/Data Modem (14.4K)
card "GATEWAY2000" "CC3144"
config 0x22 "sio" ?
# This one does work though
card "HAYES" "OPT288"
config 0x23 "sio" ?
# Hayes OPTIMA 288 FAX/Data Modem
# currently does not work on my machine
card "Hayes" "OPTIMA 288 + FAX fo"
config 0x24 "sio" ?
reset 10000
# IBM Push/Pop Modem (14.4K)
card "IBM" "Push/Pop Modem(14.4K)"
config 0x22 "sio" ?
# IBM 56k PCCCARD modem
card "IBM" "56K PC Card Modem"
config 0x22 "sio" ?
# Intel EtherExpress(TM) PRO/100 LAN/Modem PC Card Adapter (as modem)
card "Intel" "EtherExpress(TM) PRO/100 LAN/Modem PC Card Adapter"
config 0x1f "sio" ?
# US Robotics Worldport 14400
card "Intel" "MODEM 2400+"
config 0x2 "sio" ?
# Intelligent SurfCard
card "Intelligent" "PCMCIA FAX+MODEM"
config 0x1f "sio" ?
reset 1000
# Megahertz XJEM3288 (as modem)
card "MEGAHERTZ" "CC/XJEM3288"
config auto "sio" ?
# Megahertz XJEM1336 (as modem)
card "MEGAHERTZ" "CC/XJEM3336"
config auto "sio" ?
# Megahertz XJ1144
card "MEGAHERTZ" "XJ1144"
config 0x23 "sio" ?
# Megahertz XJ2144 (US)
card "MEGAHERTZ" "XJ2144"
config 0x23 "sio" ?
# Megahertz XJ2144 (JP)
card "MEGAHERTZ" "XJ2144-81"
config 0x23 "sio" ?
# Megahertz XJ2288
card "MEGAHERTZ" "XJ2288"
config 0x23 "sio" ?
# Megahertz XJ3288
card "MEGAHERTZ" "XJ3288"
config 0x21 "sio" ?
# Megahertz XJ-CC4288
card "Megahertz" "XJ-CC4288"
config 0x23 "sio" ?
# Megahertz XJ4336
card "Megahertz" "XJ4336-CC4336"
config 0x22 "sio" ?
# config auto "sio" ?
# config 0x23 "sio" ?
# XXX generic serial?
# Megahertz X-Jack Ethernet/Modem 14.4K (as Modem only)
card "Megahertz" "XJEM1144/CCEM1144"
config 0x27 "sio" ?
# Motorola Montana
card "Motorola" "MONTANA 33.6 FAX/MODEM"
config 0x21 "sio" ?
# XXX generic serial?
# Motorola Marine multifunction card (as modem)
card "Motorola, Inc." "MARINER MODEM/FAX/LAN"
config 0x35 "sio" ?
# Nokia Card Phone 2.0 (gsm900/dcs1800 HSCSD terminal)
card "Nokia Mobile Phones" "Nokia Card Phone"
config 0x3 "sio" ?
# NTT ThunderCard Modem
card "NTT-IT CO., LTD" "ThunderCard AVF288, V.34"
config 0x22 "sio" ?
# NTT DoCoMo Mobile D Card 96P1
card "NTT DoCoMo" "Mobile D Card 96P1"
# config 0x22 "sio" ? 0x82
config 0x23 "sio" ? 0x82
# config auto "sio" ? 0x82
# NTT DoCoMo (formerly NTT Personal) Paldio 611S
card "NTT DoCoMo" "PALDIO 611S PC CARD"
config auto "sio" ? 0x40000
# NTT DoCoMo DATA/FAX Adapter
card "NTT DoCoMo" "PCMCIA DATA/FAX ADAPTER 9600 Mark2"
config auto "sio" ?
# NTT DoCoMo DATA/FAX Adapter
card "NTT DoCoMo" "/PCMCIA DATA/FAX.*/"
config auto "sio" ? 0x82
# NTT-IT ThunderCard
card "NTT Intelligent Technology Co., Ltd." "ThunderCard DD128"
config auto "sio" ? 0x80
reset 1000
# NTT DoCoMo (formerly NTT Personal) FAX/Data 32K PHS Card Paldio 321S
card "NTT Personal" "32K Paldio 321S PC CARD"
config 0x23 "sio" ?
# NTT DoCoMo (formerly NTT Personal) FAX/Data 32K PHS Card Paldio 341S
card "NTT Personal" "32K Paldio 341S PC CARD"
config 0x23 "sio" ?
# NTT Personal Paldio Data Card DC-1S
card "NTT Personal" "/Paldio Data.*/" "DC-1S"
config auto "sio" ? 0x40000
# Nokia Cellular Data Card
card "Nokia Mobile Phones" "DTP-2"
config 0x22 "sio" ?
config 0x23 "sio" ?
# This Nokia example allows either 1 or 2 Nokia cards to be fitted.
# With 2 Mobile Phones and Multilink PPP you can get a 19200 data channel.
# Nokia Cellular Data Card
card "Nokia Mobile Phones" "DTP-2 ver II"
config 0x23 "sio" ?
config 0x24 "sio" ?
# Novalink NovaModem 144
card "NovaLink Tech." "NovaModem 144 "
config 0x23 "sio" ?
# Novatel Merlin CDPD card (wireless modem)
card "Novatel Wireless" "Merlin Type II Wireless IP Modem"
config auto "sio" ?
# Omron ME2814 FAX/DATA MODEM
card "OMRON" "ME2814 FAX/DATA MOD"
config 0x23 "sio" ?
# Omron MD24XCA FAX/Data Modem
card "OMRON Corp." "MD24XCA"
config 0x23 "sio" ?
reset 10000
# Option International PCMCIA55K06
card "Option International" "GSM Data/Fax/SMS Modem"
config 0x22 "sio" ?
# Banksia CardModem 56
card "PCCardModem" "CardModem 56"
config 0x22 "sio" ?
# Eiger PCCARD modem
# Apparently this modem does not work unless the recommended
# init string (AT&F&C1&D2) is supplied.
card "PCMCIA " "33.6K Fax/Modem "
config 23 "sio" ?
# Actiontec Datalink with v.90 upgrade
card "PCMCIA " "56K V.90 Fax Modem (LK) "
config 0x1f "sio" ?
# Billionton 56Kbps Fax Modem
card "PCMCIA CARD 56KFaxModem" "FM56C-NFS"
config 0x22 "sio" ?
# PREMAX FM288 FAX/Data Modem
card "PREMAX" "FM288 "
config 0x23 "sio" ?
# Panasonic FM-RADIO card
card "Panasonic" "CF-JVR101"
config 0x22 "sio" ?
# Panasonic KX-PH402D
card "Panasonic" "KX-PH402D"
config 0x23 "sio" ?
# Panasonic Modem Card TO-706C
card "Panasonic" "TO-706C"
config 0x23 "sio" ?
# Panasonic Modem Card TO-706C
card "Panasonic" "TO-CAF288"
config 0x23 "sio" ?
# Panasonic TO-CAF56K FAX/Data Modem
card "Panasonic Co." "TO-CAF56K"
# config auto "sio" pio
config auto "sio" ?
reset 10000
# Random modem bundled with Dell systems
card "Psion Dacom" "Gold Card Global 56K+Fax"
config 0x23 "sio" ?
# RFI HotLine serial card
card "RFI" "RS-232 ComCard Rev.II"
config 0x23 "sio" ?
insert remove -t pccard:$device -s RFI Hotline removed
# SII MC-6530
card "SII" "PHS DATA 32S"
config auto "sio" ? 0x40000
# SII (DDI) MC-6550
card "SII" "PHS DATA 64"
config auto "sio" ? 0x40000
# TDK 14.4 FAX/Data Modem
card "TDK" "DF1414 DATA/FAX MOD"
config 0x23 "sio" ?
# TDK 14.4 FAX/Data Modem
card "TDK" "DF1414EX DATA/FAX M"
config 0x23 "sio" ?
# TDK DN1280R
card "TDK" "DN1280R"
config auto "sio" ?
reset 1000
# TDK DP9600
card "TDK" "DP9600"
config auto "sio" ? 0x40000
# XXX NOT SURE SUPPORTED
# TDK Multifunctioon Card (as Modem)
#card "TDK" "GlobalNetworker 3410/3412"
# config auto "sio" ? 0x40000
# Toshiba Modem/LAN card IPC5001B (as Modem)
card "TOSHIBA" "Modem/LAN Card"
config 0x25 "sio" ?
# 3Com/USR/Toshiba SLIMV90
card "TOSHIBA" "SLIMV90"
config 0x4 "sio" ?
# 3Com/NoteWorthy 56K modem (bundled with Toshiba notebooks)
card "Toshiba America" "3CXM056-BNW"
config 0x20 "sio" ?
# U.S. Robotics XJ1560J
card "U.S. Robotics" "XJ/CC1560J"
config 0x22 "sio" ?
# Megahertz XJ1336
card "U.S. Robotics" "XJ/CC1336"
config 0x21 "sio" ?
# US Robotics Sportster PCMCIA V.34
# US Robotics COURIER PCMCIA V.34
card "USRobotics" "PCMCIA 28800 Data/F"
config 0x3 "sio" ?
# Viking V.90/K56Flex modem
card "Viking" "V.90 K56flex"
config 0x23 "sio" ?
# Xircom CreditCard Ethernet+Modem (Modem only !!!)
card "Xircom" "CreditCard Ethernet"
config 0x23 "sio" ?
# Xircom CreditCard Ethernet 10/100 + modem (modem part)
card "Xircom" "CreditCard Ethernet+Modem 33.6"
config 0x23 "sio" ?
# Xircom GlobalACCESS modem
card "Xircom" "CreditCard Modem 56 - GlobalACCESS"
config 0x1f "sio" ?
# Xircom CreditCard Modem
card "Xircom" "CreditCard Modem CM-56T"
config 0x17 "sio" ?
reset 100
# Zoom 56K modem
# Freezes your system entirely if you don't have the reset..
card "Zoom Telephonics, Inc." "PCMCIA 56K LT DataFax"
config 0x1f "sio" ?
reset 1000
########## sn ##########
# Megahertz X-Jack Ethernet
card "Megahertz" "CC10BT/2"
config 0x1 "sn" ?
ether attr2
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
# Megahertz Ethernet Adapter
card "Megahertz" "ETHERNET ADAPTOR"
config auto "sn" ?
# ether attr2hex 00:00:86
ether attr2
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
# Megahertz X-Jack Ethernet/Modem 14.4K
#card "MEGAHERTZ" "XJEM1144/CCEM1144"
# multifunc
# config default "sn" ?
# config 0x27 "sio" shared
# MELCO LPC-TX
card "MELCO/SMC" "LPC-TX"
config auto "sn" ?
# ether 0x4a 00:a0:dc
ether 0x4a
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
# SMC EtherEZ Combo(SMC8020BT)
card "SMC" "EtherEZ Ethernet 8020"
config default "sn" ?
# ether 0x9a 00:00:c0
# ether 0x9a
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
# Victor M-MOIL CARD
card "JVC" "MiniMoil Ethernet Card"
config 0x01 "sn" ?
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
########## spc ##########
# REX5535AC, REX5535X SCSI
card "PCMCIA SCSI MBH1040" "01"
config 0x3a "spc" ?
########## stg ##########
# XXX NOT SUPPORTED YET
# RATOC REX-5536, Melco IFC-SC
#card "1195 RATOC System Inc." "REX5536 SCSI2 CARD"
# config 0x7 "stg" ? 0
# XXX NOT SUPPORTED YET
# Future Domain SCSI2GO
#card "Future Domain Corporation" "SCSI PCMCIA Credit Card Controller"
# config default "stg" ?
# XXX NOT SUPPORTED YET
# IBM SCSI PCMCIA Card
#card "IBM Corp." "SCSI PCMCIA Card"
# config default "stg" ?
# XXX NOT SUPPORTED YET
# RATOC REX-5536AM, REX-9836A, ICM PSC-2401 SCSI
# (Don't put this entry under REX5535 series!)
# There's a buggy revision of this card which has broken CIS tupples.
# if you can't use this card, please use the point enabler. (for example,
# type "pccardc enabler 0 stg0 -a 0x4140 -i 5" from root command prompt)
#card "PCMCIA SCSI MBH10404" "01"
# config 0x37 "stg" ?
# logstr "RATOC REX-5536AM SCSI"
# XXX NOT SUPPORTED YET
# RATOC REX-5536M
#card "PCMCIA SCSI2 CARD" "01"
# config 0x5 "stg" ? 0
# logstr "RATOC REX-5536M SCSI"
########## wlp ##########
# XXX NOT SUPPORTED YET
# AT&T GIS Wavelan PCMCIA
# If you want to use Japanese version, uncomment the second config
# line and comment-out the first line.
#card "AT&T" "WaveLAN/PCMCIA"
# config default "wlp" ? # US version (915MHz)
## config default "wlp" ? 0x01 # Japanese version (2.4GHz)
## ether wavelan
# insert /etc/pccard_ether $device
# remove /sbin/ifconfig $device delete
# XXX NOT SUPPORTED YET
# Digital RoamAbout
#card "Digital" "RoamAbout/DS"
# config auto "wlp" ?
## ether wavelan
# insert /usr/sbin/wlpconfig -i wlp0 -w 0xaaaa
# insert /etc/pccard_ether $device
# remove /sbin/ifconfig $device delete
# XXX NOT SUPPORTED YET
# Lucent Wavelan
#card "Lucent Technologies" "WaveLAN/PCMCIA"
# config default "wlp" ?
# ether wavelan
# insert /etc/pccard_ether $device
# remove /sbin/ifconfig $device delete
# XXX NOT SUPPORTED YET
# NCR Wavelan PCMCIA
# If you want to use Japanese version, uncomment the second config
# line and comment-out the first line.
#card "NCR" "WaveLAN/PCMCIA"
# config default "wlp" ? # US version (915MHz)
## config default "wlp" ? 0x01 # Japanese version (2.4GHz)
# ether wavelan
# insert /etc/pccard_ether $device
# remove /sbin/ifconfig $device delete
########## wi ##########
# Cabletron RoamAbout, WaveLAN/IEEE clone
card "Cabletron" "RoamAbout 802.11 DS"
config 0x1 "wi" ?
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
# ELECOM Air@Hark/LD-WL11/PCC
card "ELECOM" "Air@Hark/LD-WL11/PCC"
config auto "wi" ?
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
# Farallon Skyline 11Mbps Wireless
card "INTERSIL" "HFA384x/IEEE"
config 0x1 "wi" ?
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
# Lucent WaveLAN/IEEE
card "Lucent Technologies" "WaveLAN/IEEE"
config 0x1 "wi" ?
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
# NCR WaveLAN/IEEE
card "NCR" "WaveLAN/IEEE"
config 0x1 "wi" ?
# config auto "wi" ?
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
# NEC Wireless Card CMZ-RT-WP
card "NEC" "Wireless Card CMZ-RT-WP"
config auto "wi" ?
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
# Melco Airconnect
card "MELCO" "WLI-PCM-L11"
config 0x1 "wi" ?
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
# PLANEX GeoWave/GW-NS110
card "PLANEX" "GeoWave/GW-NS110"
config 0x1 "wi" ?
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
########## xe ##########
# Accton EN2226/Fast EtherCard (16-bit verison)
card "Accton" "Fast EtherCard-16"
config default "xe" ?
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
# Compaq Netelligent 10/100 PC Card
card "Compaq" "Netelligent 10/100 PC Card"
config 0x1 "xe" ?
insert /etc/pccard_ether $device
remove sbin/ifconfig $device delete
# Intel EtherExpress PRO/100 Mobile Adapter (16-bit verison)
card "Intel" "EtherExpress(TM) PRO/100 PC Card Mobile Adapter16"
config 0x1 "xe" ?
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
# XXX NOT SURE SUPPORTED
# Toshiba 10/100 Ethernet PC Card IPC5008A
#card "Toshiba" "10/100 Ethernet PC Card"
# config auto "xe" ?
## cardio 0x300 0x10
# iosize 16
# insert /etc/pccard_ether $device
# remove /sbin/ifconfig $device delete
# Xircom Realport card + modem
card "Xircom" "16-bit Ethernet + Modem 56"
config 0x27 "xe" 9
insert /etc/pccard_ether $device
remove /etc/pccard_ether $device delete
# Xircom CreditCard Ethernet 10/100
card "Xircom" "CreditCard 10/100"
config 0x1 "xe" ?
insert /etc/pccard_ether $device
remove /etc/pccard_ether $device delete
# Xircom CreditCard 10Base-T "CreditCard Ethernet Adaptor IIps" (PS-CE2-10)
card "Xircom" "CreditCard 10Base-T"
config auto "xe" ?
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
# Xircom CreditCard Ethernet 10/100 + modem (Ethernet part)
card "Xircom" "CreditCard Ethernet 10/100 + Modem 56"
config 0x27 "xe" ?
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
# -------------------------------------------------------------------
#
# "Wildcard" entries
#
# -------------------------------------------------------------------
# GENERIC PCMCIA modem
generic serial
config auto "sio" ?
reset 10000 # for unstable cards
logstr "GENERIC PCMCIA modem"
# GENERIC Flash ATA / ATA HDD
generic fixed_disk
config auto "ata" ?
logstr "GENERIC Flash ATA / ATA HDD"
%exit
Script done on Fri Dec 8 09:09:20 2000
==============================================================
Help!
Fischer
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.21.0012081016270.75948-100000>