Date: Tue, 13 Nov 2001 19:03:39 +0100 From: Marcin Cieslak <saper@system.pl> To: freebsd-stable@FreeBSD.org Subject: Intel 82801AA (ICH) - unable to map IO port space on PCI? Message-ID: <20011113190339.A57871@barbera.system.pl>
next in thread | raw e-mail | index | archive | help
First time install on quite new HP Vectra machine, but
I cannot get USB and embedded audio (AC'97) to work
with very recent -STABLE. Fragment of dmesg output:
isab0: <Intel 82801AA (ICH) PCI to LPC bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH ATA66 controller> port 0x1800-0x180f at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82801AA (ICH) USB controller> at device 31.2 on pci0
uhci0: Could not map ports
device_probe_and_attach: uhci0 attach returned 6
ichsmb0: <Intel 82801AA (ICH) SMBus controller> port 0x1810-0x181f irq 9 at device 31.3 on pci0
smbus0: <System Management Bus> on ichsmb0
smb0: <SMBus general purpose I/O> on smbus0
pcm0: <Intel 82801AA (ICH)> at device 31.5 on pci0
pcm0: unable to map IO port space
device_probe_and_attach: pcm0 attach returned 6
I was supposing that the sound card is just not supported
until I noticed similar message below the uhci0 entry.
I get the same results without "device smbus/smb/ichsmb"
entries - ichsmb0 gets unrecognized then, but sound
and USB is still unusable.
Output from pciconf -l:
chip0@pci0:0:0: class=0x060000 card=0x11308086 chip=0x11308086 rev=0x02 hdr=0x00
pcib1@pci0:1:0: class=0x060400 card=0x00000000 chip=0x11318086 rev=0x02 hdr=0x01
pcib2@pci0:30:0: class=0x060400 card=0x00000000 chip=0x24188086 rev=0x02 hdr=0x01
isab0@pci0:31:0: class=0x060100 card=0x00000000 chip=0x24108086 rev=0x02 hdr=0x00
atapci0@pci0:31:1: class=0x010180 card=0x24118086 chip=0x24118086 rev=0x02 hdr=0x00
none0@pci0:31:2: class=0x0c0300 card=0x24128086 chip=0x24128086 rev=0x02 hdr=0x00
ichsmb0@pci0:31:3: class=0x0c0500 card=0x24138086 chip=0x24138086 rev=0x02 hdr=0x00
none1@pci0:31:5: class=0x040100 card=0x1249103c chip=0x24158086 rev=0x02 hdr=0x00
none2@pci2:0:0: class=0x030000 card=0x0541102b chip=0x0525102b rev=0x82 hdr=0x00
xl0@pci1:4:0: class=0x020000 card=0x1246103c chip=0x920010b7 rev=0x78 hdr=0x00
Kernel config enclosed below the sig.
--
<< Marcin Cieslak // saper@system.pl >>
machine i386
cpu I586_CPU
cpu I686_CPU
ident ALT
maxusers 64
makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols
options MATH_EMULATE #Support for x87 emulation
options INET #InterNETworking
options INET6 #IPv6 communications protocols
options FFS #Berkeley Fast Filesystem
options FFS_ROOT #FFS usable as root device [keep this!]
options SOFTUPDATES #Enable FFS soft updates support
options MFS #Memory Filesystem
options MD_ROOT #MD is a potential root device
options NFS #Network Filesystem
options NFS_ROOT #NFS usable as root device, NFS required
options MSDOSFS #MSDOS Filesystem
options CD9660 #ISO 9660 Filesystem
options CD9660_ROOT #CD-ROM usable as root, CD9660 required
options PROCFS #Process filesystem
options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!]
options SCSI_DELAY=15000 #Delay (in ms) before probing SCSI
options UCONSOLE #Allow users to grab the console
options USERCONFIG #boot -c editor
options VISUAL_USERCONFIG #visual boot -c editor
options KTRACE #ktrace(1) support
options SYSVSHM #SYSV-style shared memory
options SYSVMSG #SYSV-style message queues
options SYSVSEM #SYSV-style semaphores
options P1003_1B #Posix P1003_1B real-time extensions
options _KPOSIX_PRIORITY_SCHEDULING
options ICMP_BANDLIM #Rate limit bad replies
options KBD_INSTALL_CDEV # install a CDEV entry in /dev
device isa
device pci
device fdc0 at isa? port IO_FD1 irq 6 drq 2
device fd0 at fdc0 drive 0
device ata0 at isa? port IO_WD1 irq 14
device ata1 at isa? port IO_WD2 irq 15
device ata
device atadisk # ATA disk drives
device atapicd # ATAPI CDROM drives
device atapifd # ATAPI floppy drives
device atapist # ATAPI tape drives
options ATA_STATIC_ID #Static device numbering
device ahb # EISA AHA1742 family
device ahc # AHA2940 and onboard AIC7xxx devices
device amd # AMD 53C974 (Tekram DC-390(T))
device isp # Qlogic family
device ncr # NCR/Symbios Logic
device sym # NCR/Symbios Logic (newer chipsets)
options SYM_SETUP_LP_PROBE_MAP=0x40
# Allow ncr to attach legacy NCR devices when
# both sym and ncr are configured
device ncv # NCR 53C500
device nsp # Workbit Ninja SCSI-3
device stg # TMC 18C30/18C50
device scbus # SCSI bus (required)
device da # Direct Access (disks)
device sa # Sequential Access (tape etc)
device cd # CD
device pass # Passthrough device (direct SCSI access)
device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID
device dpt # DPT Smartcache - See LINT for options!
device mly # Mylex AcceleRAID/eXtremeRAID
device aac # Adaptec FSA RAID, Dell PERC2/PERC3
device ida # Compaq Smart RAID
device amr # AMI MegaRAID
device mlx # Mylex DAC960 family
device twe # 3ware Escalade
device atkbdc0 at isa? port IO_KBD
device atkbd0 at atkbdc? irq 1 flags 0x1
device psm0 at atkbdc? irq 12
device vga0 at isa?
pseudo-device splash
device sc0 at isa? flags 0x100
device npx0 at nexus? port IO_NPX irq 13
device apm0 at nexus? disable flags 0x20 # Advanced Power Management
device sio0 at isa? port IO_COM1 flags 0x10 irq 4
device sio1 at isa? port IO_COM2 irq 3
device sio2 at isa? disable port IO_COM3 irq 5
device sio3 at isa? disable port IO_COM4 irq 9
device ppc0 at isa? irq 7
device ppbus # Parallel port bus (required)
device lpt # Printer
device plip # TCP/IP over parallel
device ppi # Parallel port interface device
device de # DEC/Intel DC21x4x (``Tulip'')
device txp # 3Com 3cR990 (``Typhoon'')
device vx # 3Com 3c590, 3c595 (``Vortex'')
device miibus # MII bus support
device dc # DEC/Intel 21143 and various workalikes
device fxp # Intel EtherExpress PRO/100B (82557, 82558)
device pcn # AMD Am79C97x PCI 10/100 NICs
device rl # RealTek 8129/8139
device sf # Adaptec AIC-6915 (``Starfire'')
device sis # Silicon Integrated Systems SiS 900/SiS 7016
device ste # Sundance ST201 (D-Link DFE-550TX)
device tl # Texas Instruments ThunderLAN
device tx # SMC EtherPower II (83c170 ``EPIC'')
device vr # VIA Rhine, Rhine II
device wb # Winbond W89C840F
device wx # Intel Gigabit Ethernet Card (``Wiseman'')
device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
device ex
device ep
device xe
device awi
device wi
device an
pseudo-device loop # Network loopback
pseudo-device ether # Ethernet support
pseudo-device sl 1 # Kernel SLIP
pseudo-device ppp 1 # Kernel PPP
pseudo-device tun # Packet tunnel.
pseudo-device pty # Pseudo-ttys (telnet etc)
pseudo-device md # Memory "disks"
pseudo-device gif # IPv6 and IPv4 tunneling
pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation)
pseudo-device bpf #Berkeley packet filter
device uhci # UHCI PCI->USB interface
device ohci # OHCI PCI->USB interface
device usb # USB Bus (required)
device ugen # Generic
device uhid # "Human Interface Devices"
device ukbd # Keyboard
device ulpt # Printer
device umass # Disks/Mass storage - Requires scbus and da
device ums # Mouse
device uscanner # Scanners
device urio # Diamond Rio MP3 Player
device aue # ADMtek USB ethernet
device cue # CATC USB ethernet
device kue # Kawasaki LSI USB ethernet
device pcm
device csa
device sbc
device smbus
device smb
device ichsmb
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20011113190339.A57871>