Date: Tue, 16 Apr 2002 01:50:13 -0000 From: "Jordan Breeding" <jordan.breeding@attbi.com> To: <freebsd-scsi@freebsd.org> Subject: Trouble installing 5.0-DP1 to a Tyan Thunder K7 (aic7xxx)... Message-ID: <!~!UENERkVCMDkAAQACAAAAAAAAAAAAAAAAABgAAAAAAAAAjQHXypTRWUeX0Da3WGxUUMKAAAAQAAAAB5S/GF2FpEylB6XRir51UAEAAAAA@attbi.com>
next in thread | raw e-mail | index | archive | help
[-- Attachment #1 --]
Hello,
I have recently aquired a new Tyan Thunder K7 (S2462UNG) with on-board
Adaptec scsi. Everything with the scsi works great in DOS, Linux and
Windows. However, I hate using Windows, and Linux is giving me lots of
trouble with this board in regards to rebooting and shuting down
properly. I was playing with some old FreeBSD CDROMs I had laying
around the other and it appeared that from the CDROM at least FreeBSD
can correctly reboot this machine. While I still use linux for the bulk
of my work I decided I could at least do a small install of FreeBSD on
my virtually unused SCSI 4 GB hd at Channel A, id 0 and go from there.
So I first decided to boot from the 5.0-DP1 iso which I downloaded, but
this didn't work as I expected, the disc booted, found my IDE hard
drive, found my SCSI CDROM and went into the sysinstal without ever
finding my SCSI hard drive. So then I tried the 4.5 discs which I had
laying around. I no longer have my 4.4 discs but something tells me
those wouldn't have done much better, and I would want to be able to do
CVS pulls of current anyway which was the original breakage I noticed.
So since I do not have a serial console laying around at the moment I
decided to do a boot -v and then boot the "live" filesystem and dump the
dmesg to a floppy. In this email (sorry about the length) I have
included a dmesg output from Linux (which works as far as the SCSI goes,
I am using 2.4.19-pre6 with some other patches and am using the new
aic7xxx driver from Justin Gibbs) as well as the dmesg from a boot -v
showing the failure of the FreeBSD 5.0-DP1 boot to find my Channel A and
hence failure to find my hard drive. Thanks for any help, please let me
know if there is anything I can try to fix this. I do not have room
anywhere on my current IDE drive for FreeBSD so I need to try and
eventually get a fixed install method so that I can install to the scsi
drive. Thanks for any help which you can give me in solving this
situation.
Jordan Breeding
PS - I am not on this list so please Cc: me on replies.
[-- Attachment #2 --]
IOS-e820: 000000001ffffc00 - 0000000020000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
found SMP MP-table at 000f74d0
hm, page 000f7000 reserved twice.
hm, page 000f8000 reserved twice.
hm, page 0009f000 reserved twice.
hm, page 000a0000 reserved twice.
On node 0 totalpages: 131056
zone(0): 4096 pages.
zone(1): 126960 pages.
zone(2): 0 pages.
ACPI: Searched entire block, no RSDP was found.
ACPI: RSDP located at physical address c00f7470
RSD PTR v0 [PTLTD ]
__va_range(0x1fffd505, 0x68): idx=8 mapped at ffff6000
ACPI table found: RSDT v1 [PTLTD RSDT 1540.0]
__va_range(0x1ffffb2e, 0x24): idx=8 mapped at ffff6000
__va_range(0x1ffffb2e, 0x74): idx=8 mapped at ffff6000
ACPI table found: FACP v1 [TYAN GUINNESS 1540.0]
__va_range(0x1ffffba2, 0x24): idx=8 mapped at ffff6000
__va_range(0x1ffffba2, 0x5e): idx=8 mapped at ffff6000
ACPI table found: APIC v1 [PTLTD APIC 1540.0]
__va_range(0x1ffffba2, 0x5e): idx=8 mapped at ffff6000
LAPIC (acpi_id[0x0000] id[0x1] enabled[1])
CPU 0 (0x0100) enabledProcessor #1 Pentium(tm) Pro APIC version 16
LAPIC (acpi_id[0x0001] id[0x0] enabled[1])
CPU 1 (0x0000) enabledProcessor #0 Pentium(tm) Pro APIC version 16
IOAPIC (id[0x2] address[0xfec00000] global_irq_base[0x0])
INT_SRC_OVR (bus[0] irq[0x0] global_irq[0x2] polarity[0x1] trigger[0x1])
LAPIC_NMI (acpi_id[0x0000] polarity[0x1] trigger[0x1] lint[0x1])
LAPIC_NMI (acpi_id[0x0001] polarity[0x1] trigger[0x1] lint[0x1])
2 CPUs total
Local APIC address fee00000
Enabling the CPU's according to the ACPI table
Intel MultiProcessor Specification v1.4
Virtual Wire compatibility mode.
OEM ID: TYAN Product ID: GUINNESS APIC at: 0xFEE00000
I/O APIC #2 Version 17 at 0xFEC00000.
Processors: 2
Phoenix Technologies Ltd.Guinness-8 03/21/2002TyanTHUNDER K7EVT1 0123456789TyanTHUNDER K7EVT1 Kernel command line: ro root=/dev/hda7 profile=2 nmi_watchdog=1 acpismp=force video=radeon:1280x1024-8@85 3
Initializing CPU#0
Detected 1592.916 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 3178.49 BogoMIPS
Memory: 509716k/524224k available (2672k kernel code, 14120k reserved, 645k data, 348k init, 0k highmem)
Dentry-cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
CPU: Before vendor init, caps: 0383fbff c1cbfbff 00000000, vendor = 2
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: After vendor init, caps: 0383fbff c1cbfbff 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 0383fbff c1cbfbff 00000000 00000000
CPU: Common caps: 0383fbff c1cbfbff 00000000 00000000
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
CPU: Before vendor init, caps: 0383fbff c1cbfbff 00000000, vendor = 2
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: After vendor init, caps: 0383fbff c1cbfbff 00000000 00000000
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 0383fbff c1cbfbff 00000000 00000000
CPU: Common caps: 0383fbff c1cbfbff 00000000 00000000
CPU0: AMD Athlon(tm) MP 1900+ stepping 02
per-CPU timeslice cutoff: 731.57 usecs.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Booting processor 1/0 eip 2000
Initializing CPU#1
masked ExtINT on CPU#1
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Calibrating delay loop... 3185.04 BogoMIPS
CPU: Before vendor init, caps: 0383fbff c1cbfbff 00000000, vendor = 2
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: After vendor init, caps: 0383fbff c1cbfbff 00000000 00000000
Intel machine check reporting enabled on CPU#1.
CPU: After generic, caps: 0383fbff c1cbfbff 00000000 00000000
CPU: Common caps: 0383fbff c1cbfbff 00000000 00000000
CPU1: AMD Athlon(tm) Processor stepping 02
Total of 2 processors activated (6363.54 BogoMIPS).
ENABLING IO-APIC IRQs
Setting 2 in the phys_id_present_map
...changing IO-APIC physical APIC ID to 2 ... ok.
init IO_APIC IRQs
IO-APIC (apicid-pin) 2-0, 2-5, 2-7, 2-10, 2-11, 2-20, 2-21, 2-22, 2-23 not connected.
..TIMER: vector=0x31 pin1=2 pin2=0
activating NMI Watchdog ... done.
testing NMI watchdog ... CPU#0: NMI appears to be stuck!
number of MP IRQ sources: 20.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................
IO APIC #2......
.... register #00: 02000000
....... : physical APIC id: 02
.... register #01: 00170011
....... : max redirection entries: 0017
....... : PRQ implemented: 0
....... : IO APIC version: 0011
.... register #02: 00000000
....... : arbitration: 00
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 003 03 0 0 0 0 0 1 1 39
02 003 03 0 0 0 0 0 1 1 31
03 003 03 0 0 0 0 0 1 1 41
04 003 03 0 0 0 0 0 1 1 49
05 000 00 1 0 0 0 0 0 0 00
06 003 03 0 0 0 0 0 1 1 51
07 000 00 1 0 0 0 0 0 0 00
08 003 03 0 0 0 0 0 1 1 59
09 003 03 0 0 0 0 0 1 1 61
0a 000 00 1 0 0 0 0 0 0 00
0b 000 00 1 0 0 0 0 0 0 00
0c 003 03 0 0 0 0 0 1 1 69
0d 003 03 0 0 0 0 0 1 1 71
0e 003 03 0 0 0 0 0 1 1 79
0f 003 03 0 0 0 0 0 1 1 81
10 003 03 1 1 0 1 0 1 1 89
11 003 03 1 1 0 1 0 1 1 91
12 003 03 1 1 0 1 0 1 1 99
13 003 03 1 1 0 1 0 1 1 A1
14 000 00 1 0 0 0 0 0 0 00
15 000 00 1 0 0 0 0 0 0 00
16 000 00 1 0 0 0 0 0 0 00
17 000 00 1 0 0 0 0 0 0 00
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ6 -> 0:6
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ16 -> 0:16
IRQ17 -> 0:17
IRQ18 -> 0:18
IRQ19 -> 0:19
.................................... done.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1592.9701 MHz.
..... host bus clock speed is 265.4950 MHz.
cpu: 0, clocks: 2654950, slice: 884983
CPU0<T0:2654944,T1:1769952,D:9,S:884983,C:2654950>
cpu: 1, clocks: 2654950, slice: 884983
CPU1<T0:2654944,T1:884976,D:2,S:884983,C:2654950>
checking TSC synchronization across CPUs: passed.
Waiting on wait_init_idle (map = 0x2)
All processors have done init_idle
mtrr: your CPUs had inconsistent fixed MTRR settings
mtrr: probably your BIOS does not setup all CPUs
PCI: PCI BIOS revision 2.10 entry at 0xfd7c0, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI->APIC IRQ transform: (B0,I7,P3) -> 19
PCI->APIC IRQ transform: (B0,I11,P0) -> 19
PCI->APIC IRQ transform: (B0,I12,P0) -> 16
PCI->APIC IRQ transform: (B0,I13,P0) -> 16
PCI->APIC IRQ transform: (B0,I13,P1) -> 17
PCI->APIC IRQ transform: (B0,I15,P0) -> 18
PCI->APIC IRQ transform: (B0,I16,P0) -> 19
PCI->APIC IRQ transform: (B1,I5,P0) -> 17
BIOS failed to enable PCI standards compliance, fixing this error.
I/O APIC: AMD Errata #22 may be present. In the event of instability try
: booting with the "noapic" option.
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12 (20020219) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
Journalled Block Device driver loaded
cdfs 0.5c loaded.
NTFS driver v1.1.22 [Flags: R/W]
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
ACPI: Core Subsystem version [20011018]
ACPI: Subsystem enabled
ACPI: System firmware supports S0 S1 S4 S5
Processor[0]: C0 C1
Processor[1]: C0 C1
ACPI: Power Button (FF) found
ACPI: Multiple power buttons detected, ignoring fixed-feature
ACPI: Power Button (CM) found
ACPI: Sleep Button (FF) found
i2c-core.o: i2c core module version 2.6.3 (20020322)
i2c-dev.o: i2c /dev entries driver module version 2.6.3 (20020322)
i2c-proc.o version 2.6.3 (20020322)
i2c-amd756.o version 2.6.3 (20020322)
i2c-dev.o: Registered 'SMBus AMD7X6 adapter at 80e0' as minor 0
i2c-amd756.o: AMD756/766 bus detected and initialized
i2c-isa.o version 2.6.3 (20020322)
i2c-dev.o: Registered 'ISA main adapter' as minor 1
i2c-isa.o: ISA bus access for i2c modules initialized.
radeonfb: ref_clk=2700, ref_div=12, xclk=23000 defaults
Console: switching to colour frame buffer device 160x64
radeonfb: ATI Radeon 7500 QW DDR SGRAM 64 MB
radeonfb: DVI port CRT monitor connected
radeonfb: CRT port no monitor connected
pty: 2048 Unix98 ptys configured
w83781d.o version 2.6.3 (20020322)
eeprom.o version 2.6.3 (20020322)
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP SERIAL_ACPI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
ttyS04 at port 0x1400 (irq = 16) is a 16550A
Real Time Clock Driver v1.10e
Non-volatile memory driver v1.1
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
AMD7411: IDE controller on PCI bus 00 dev 39
AMD7411: chipset revision 1
AMD7411: not 100% native mode: will probe irqs later
AMD7411: disabling single-word DMA support (revision < C4)
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio
hda: ST380021A, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=9729/255/63, UDMA(100)
Partition check:
/dev/ide/host0/bus0/target0/lun0: p1 p2 p3 < p5 p6 p7 p8 p9 p10 p11 p12 p13 >
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
00:0f.0: 3Com PCI 3c982 Dual Port Server Cyclone at 0x2000. Vers LK1.1.16
00:10.0: 3Com PCI 3c982 Dual Port Server Cyclone at 0x2080. Vers LK1.1.16
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
Universal TUN/TAP device driver 1.4 (C)1999-2001 Maxim Krasnyansky
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: Detected AMD 760MP chipset
agpgart: AGP aperture is 64M @ 0xec000000
[drm] AGP 0.99 on AMD Irongate @ 0xec000000 64MB
[drm] Initialized radeon 1.1.1 20010405 on minor 0
SCSI subsystem driver Revision: 1.00
Loading Adaptec I2O RAID: Version 2.4 Build 5
Detecting Adaptec I2O RAID controllers...
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.5
<Adaptec aic7899 Ultra160 SCSI adapter>
aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
scsi1 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.5
<Adaptec aic7899 Ultra160 SCSI adapter>
aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs
Vendor: IBM Model: DCAS-34330W Rev: S65A
Type: Direct-Access ANSI SCSI revision: 02
(scsi0:A:0): 40.000MB/s transfers (20.000MHz, offset 15, 16bit)
scsi0:A:0:0: Tagged Queuing enabled. Depth 253
Vendor: TEAC Model: CD-R55S Rev: 1.0R
Type: CD-ROM ANSI SCSI revision: 02
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
SCSI device sda: 8467200 512-byte hdwr sectors (4335 MB)
/dev/scsi/host0/bus0/target0/lun0: p1 p2
Attached scsi CD-ROM sr0 at scsi1, channel 0, id 5, lun 0
(scsi1:A:5): 10.000MB/s transfers (10.000MHz, offset 15)
sr0: scsi-1 drive
Uniform CD-ROM driver Revision: 3.12
Creative EMU10K1 PCI Audio Driver, version 0.18, 17:24:28 Apr 11 2002
emu10k1: EMU10K1 rev 8 model 0x8027 found, IO at 0x2400-0x241f, IRQ 19
ac97_codec: AC97 codec, id: 0x5452:0x4123 (TriTech TR A5)
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-ohci.c: USB OHCI at membase 0xc00dc000, IRQ 19
usb-ohci.c: usb-00:07.4, Advanced Micro Devices [AMD] AMD-766 [ViperPlus] USB
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 4 ports detected
usb.c: registered new driver hiddev
usb.c: registered new driver hid
hid-core.c: v1.8 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
hid-core.c: USB HID support drivers
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 2048 buckets, 32Kbytes
TCP: Hash tables configured (established 16384 bind 21845)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
IPv6 v0.8 for NET4.0
IPv6 over IPv4 tunneling driver
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 348k freed
hub.c: USB new device connect on bus1/1, assigned device number 2
input0: USB HID v1.00 Mouse [0430:0100] on usb1:2.0
hub.c: USB new device connect on bus1/2, assigned device number 3
input1: USB HID v1.00 Keyboard [0430:0005] on usb1:3.0
Adding Swap: 2097136k swap-space (priority -1)
Adding Swap: 2097136k swap-space (priority -2)
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,7), internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on sd(8,1), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,13), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,12), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,9), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,1), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,10), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,8), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
eth0: no IPv6 routers present
eth1: no IPv6 routers present
[-- Attachment #3 --]
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-DP1 #1: Sun Apr 7 11:02:24 GMT 2002
murray@builder.freebsdmall.com:/usr/src/sys/i386/compile/BOOTMFS
Preloaded elf kernel "/kernel" at 0xc0815000.
Preloaded mfs_root "/mfsroot" at 0xc0815090.
Calibrating clock(s) ... TSC clock: 1592628231 Hz, i8254 clock: 1192980 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
Timecounter "TSC" frequency 1592902403 Hz
CPU: AMD Athlon(tm) MP 1900+ (1592.90-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x662 Stepping = 2
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
AMD Features=0xc0480000<MP,AMIE,DSP,3DNow!>
Data TLB: 32 entries, fully associative
Instruction TLB: 16 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L2 internal cache: 256 kbytes, 64 bytes/line, 1 lines/tag, 8-way associative
real memory = 536805376 (524224K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009dfff, 643072 bytes (157 pages)
0x0083c000 - 0x1ffe7fff, 528138240 bytes (128940 pages)
avail memory = 514035712 (501988K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00f7440
bios32: Entry = 0xfd6a0 (c00fd6a0) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xfd6a0+0x120
pnpbios: Found PnP BIOS data at 0xc00f7490
pnpbios: Entry = f0000:9ea4 Rev = 1.0
Other BIOS signatures found:
null: <null device, zero device>
mem: <memory & I/O>
Pentium Pro MTRR support enabled
md0: Preloaded image </mfsroot> 4423680 bytes at 0xc03dbf00
Creating DISK md0
pci_open(1): mode 1 addr port (0x0cf8) is 0x80003850
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=700c1022)
Using $PIR table, 268435454 entries at 0xc00fdef0
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
pci0: physical bus=0
map[10]: type 3, range 32, base ec000000, size 26, enabled
map[14]: type 3, range 32, base e8004000, size 12, enabled
map[18]: type 4, range 32, base 00002430, size 2, port disabled
found-> vendor=0x1022, dev=0x700c, revid=0x11
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
found-> vendor=0x1022, dev=0x700d, revid=0x00
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
found-> vendor=0x1022, dev=0x7410, revid=0x02
bus=0, slot=7, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
map[20]: type 4, range 32, base 0000f000, size 4, enabled
found-> vendor=0x1022, dev=0x7411, revid=0x01
bus=0, slot=7, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
found-> vendor=0x1022, dev=0x7413, revid=0x01
bus=0, slot=7, func=3
class=06-80-00, hdrtype=0x00, mfdev=0
map[10]: type 1, range 32, base 000dc000, size 12, enabled
found-> vendor=0x1022, dev=0x7414, revid=0x07
bus=0, slot=7, func=4
class=0c-03-10, hdrtype=0x00, mfdev=0
intpin=d, irq=11
map[10]: type 4, range 32, base 00002400, size 5, enabled
found-> vendor=0x1102, dev=0x0002, revid=0x08
bus=0, slot=11, func=0
class=04-01-00, hdrtype=0x00, mfdev=1
intpin=a, irq=11
powerspec 1 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 00002438, size 3, enabled
found-> vendor=0x1102, dev=0x7002, revid=0x08
bus=0, slot=11, func=1
class=09-80-00, hdrtype=0x00, mfdev=1
powerspec 1 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base e8003000, size 8, enabled
map[14]: type 4, range 32, base 00001400, size 8, enabled
map[18]: type 4, range 32, base 00001000, size 8, enabled
map[1c]: type 4, range 32, base 00002440, size 3, enabled
found-> vendor=0x11c1, dev=0x0480, revid=0x00
bus=0, slot=12, func=0
class=07-03-03, hdrtype=0x00, mfdev=0
intpin=a, irq=5
powerspec 2 supports D0 D2 D3 current D0
map[10]: type 4, range 32, base 00001800, size 8, enabled
map[14]: type 1, range 64, base e8001000, size 12, enabled
found-> vendor=0x9005, dev=0x00cf, revid=0x01
bus=0, slot=13, func=0
class=01-00-00, hdrtype=0x00, mfdev=1
intpin=a, irq=5
powerspec 2 supports D0 D3 current D0
map[10]: type 4, range 32, base 00001c00, size 8, enabled
map[14]: type 1, range 64, base e8002000, size 12, enabled
found-> vendor=0x9005, dev=0x00cf, revid=0x01
bus=0, slot=13, func=1
class=01-00-00, hdrtype=0x00, mfdev=1
intpin=b, irq=10
powerspec 2 supports D0 D3 current D0
map[10]: type 4, range 32, base 00002000, size 7, enabled
map[14]: type 1, range 32, base e8003400, size 7, enabled
found-> vendor=0x10b7, dev=0x9805, revid=0x78
bus=0, slot=15, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
intpin=a, irq=7
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 00002080, size 7, enabled
map[14]: type 1, range 32, base e8003800, size 7, enabled
found-> vendor=0x10b7, dev=0x9805, revid=0x78
bus=0, slot=16, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
pci0: <PCI bus> on pcib0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0x3000-0x3fff
pcib1: memory decode 0xe8100000-0xe81fffff
pcib1: prefetched decode 0xf0000000-0xf7ffffff
pci1: physical bus=1
map[10]: type 3, range 32, base f0000000, size 27, enabled
map[14]: type 4, range 32, base 00003000, size 8, enabled
map[18]: type 1, range 32, base e8100000, size 16, enabled
found-> vendor=0x1002, dev=0x5157, revid=0x00
bus=1, slot=5, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
intpin=a, irq=255
powerspec 2 supports D0 D1 D2 D3 current D0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 5.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <AMD 766 ATA100 controller> port 0xf000-0xf00f at device 7.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xf000
ata0: mask=03 ostat0=50 ostat2=00
ata0-master: ATAPI 00 00
ata0-slave: ATAPI 00 00
ata0: mask=03 stat0=50 stat1=00
ata0-master: ATA 01 a5
ata0: devices=01
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xf008
ata1: mask=03 ostat0=20 ostat2=30
ata1-master: ATAPI 20 20
ata1-slave: ATAPI 30 30
ata1: mask=03 stat0=20 stat1=30
ata1-master: ATA 25 25
ata1-slave: ATA 25 25
ata1: devices=00
ata1: at 0x170 irq 15 on atapci0
pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached)
ohci0: <AMD-766 USB Controller> mem 0xdc000-0xdcfff irq 11 at device 7.4 on pci0
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <AMD-766 USB Controller> on ohci0
usb0: USB revision 1.0
uhub0: AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
ums0: Sun Microsystems Type 6 USB mouse, rev 1.00/1.02, addr 2, iclass 3/1
ums0: 3 buttons
ukbd0: Sun Microsystems Type 6 USB keyboard, rev 1.00/1.02, addr 3, iclass 3/1
kbd: new array size 4
kbd1 at ukbd0
kbd1: ukbd0, generic (0), config:0x0, flags:0x1d0000
pci0: <multimedia, audio> at device 11.0 (no driver attached)
pci0: <input device> at device 11.1 (no driver attached)
sio0: irq maps: 0x1001 0x1021 0x1001 0x1001
sio0: <Lucent kermit based PCI Modem> port 0x2440-0x2447,0x1000-0x10ff,0x1400-0x14ff mem 0xe8003000-0xe80030ff irq 5 at device 12.0 on pci0
sio0: moving to sio4
sio4: type 16550A
ahc0: <Adaptec aic7899 Ultra160 SCSI adapter> port 0x1800-0x18ff mem 0xe8001000-0xe8001fff irq 5 at device 13.0 on pci0
ahc0: Reading SEEPROM...done.
ahc0: Manual SE Termination
ahc0: Manual LVD Termination
ahc0: BIOS eeprom is present
ahc0: Primary Low Byte termination Enabled
ahc0: Primary High Byte termination Enabled
ahc0: Downloading Sequencer Program... 419 instructions downloaded
device_probe_and_attach: ahc0 attach returned 12
ahc0: <Adaptec aic7899 Ultra160 SCSI adapter> port 0x1c00-0x1cff mem 0xe8002000-0xe8002fff irq 10 at device 13.1 on pci0
ahc0: Reading SEEPROM...done.
ahc0: Manual SE Termination
ahc0: Manual LVD Termination
ahc0: BIOS eeprom is present
ahc0: Primary Low Byte termination Enabled
ahc0: Primary High Byte termination Enabled
ahc0: Downloading Sequencer Program... 419 instructions downloaded
aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/255 SCBs
pci0: <network, ethernet> at device 15.0 (no driver attached)
pci0: <network, ethernet> at device 16.0 (no driver attached)
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
ex_isa_identify()
pnpbios: 16 devices, largest 126 bytes
PNP0c01: adding fixed memory32 range 0-0x9ffff, size=0xa0000
PNP0c01: adding fixed memory32 range 0xe4000-0xfffff, size=0x1c000
PNP0c01: adding fixed memory32 range 0x100000-0x1fffffff, size=0x1ff00000
pnpbios: handle 0 device ID PNP0c01 (010cd041)
PNP0200: adding io range 0-0xf, size=0x10, align=0x1
PNP0200: adding io range 0x81-0x8f, size=0xf, align=0x1
PNP0200: adding io range 0xc0-0xdf, size=0x20, align=0x1
PNP0200: adding dma mask 0x10
pnpbios: handle 1 device ID PNP0200 (0002d041)
PNP0000: adding io range 0x20-0x21, size=0x2, align=0x1
PNP0000: adding io range 0xa0-0xa1, size=0x2, align=0x1
PNP0000: adding irq mask 0x4
pnpbios: handle 2 device ID PNP0000 (0000d041)
PNP0100: adding io range 0x40-0x43, size=0x4, align=0x1
PNP0100: adding irq mask 0x1
pnpbios: handle 3 device ID PNP0100 (0001d041)
PNP0b00: adding io range 0x70-0x71, size=0x2, align=0x1
PNP0b00: adding irq mask 0x100
pnpbios: handle 4 device ID PNP0b00 (000bd041)
PNP0303: adding io range 0x60-0x60, size=0x1, align=0x1
PNP0303: adding io range 0x64-0x64, size=0x1, align=0x1
PNP0303: adding irq mask 0x2
pnpbios: handle 5 device ID PNP0303 (0303d041)
PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0x1
PNP0c04: adding irq mask 0x2000
pnpbios: handle 6 device ID PNP0c04 (040cd041)
PNP0800: adding io range 0x61-0x61, size=0x1, align=0x1
pnpbios: handle 7 device ID PNP0800 (0008d041)
PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0x1
pnpbios: handle 8 device ID PNP0a03 (030ad041)
PNP0c02: adding io range 0x4d0-0x4d1, size=0x2, align=0x1
pnpbios: handle 9 device ID PNP0c02 (020cd041)
PNP0c02: adding memory32 range 0xe0000-0xe3fff, size=0x4000, align=0x4000
pnpbios: handle 10 device ID PNP0c02 (020cd041)
PNP0c02: adding fixed memory32 range 0xfec00000-0xfec0ffff, size=0x10000
PNP0c02: adding fixed memory32 range 0xfee00000-0xfee00fff, size=0x1000
pnpbios: handle 11 device ID PNP0c02 (020cd041)
PNP0c02: adding fixed memory32 range 0xd1600-0xd17ff, size=0x200
pnpbios: handle 13 device ID PNP0c02 (020cd041)
PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0x1
PNP0501: adding irq mask 0x10
pnpbios: handle 16 device ID PNP0501 (0105d041)
PNP0501: adding io range 0x2f8-0x2ff, size=0x8, align=0x1
PNP0501: adding irq mask 0x8
pnpbios: handle 17 device ID PNP0501 (0105d041)
PNP0700: adding io range 0x3f0-0x3f5, size=0x6, align=0x1
PNP0700: adding io range 0x3f7-0x3f7, size=0x1, align=0x1
PNP0700: adding irq mask 0x40
PNP0700: adding dma mask 0x4
pnpbios: handle 21 device ID PNP0700 (0007d041)
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem 0xe0000-0xe3fff,0xd1800-0xd1fff,0xc0000-0xcbfff on isa0
adv0 failed to probe on isa0
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0 failed to probe at port 0x134-0x137 on isa0
aic0 failed to probe at port 0x140-0x15f on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0067
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: current command byte:0067
psm0: failed to reset the aux device.
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x330
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x334
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x230
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x234
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x130
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x134
bt0 failed to probe at port 0x134-0x137 on isa0
cs0 failed to probe at port 0x300-0x31f on isa0
ed0 failed to probe at port 0x280-0x29f iomem 0xd8000 irq 10 on isa0
fdc0: <enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
fe0 failed to probe at port 0x300-0x31f on isa0
ie0 failed to probe at port 0x300 iomem 0xd0000 irq 10 on isa0
le0 failed to probe at port 0x300 iomem 0xd0000 irq 5 on isa0
lnc0 failed to probe at port 0x280 irq 10 drq 0 on isa0
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
pmtimer0 failed to probe on isa0
ppc0: parallel port not found.
ppc0: <Parallel port> failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: irq maps: 0x1041 0x1051 0x1041 0x1041
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: irq maps: 0x1041 0x1049 0x1041 0x1041
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: Cannot allocate irq
sn0 failed to probe at port 0x300-0x30f irq 10 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 06 90 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vt0 failed to probe on isa0
isa_probe_children: probing PnP devices
adv1: Invalid baseport of 0x0 specified. Nearest valid baseport is 0x100. Failing probe.
adv1: Invalid baseport of 0x20 specified. Nearest valid baseport is 0x100. Failing probe.
adv1: Invalid baseport of 0x40 specified. Nearest valid baseport is 0x100. Failing probe.
adv1: Invalid baseport of 0x70 specified. Nearest valid baseport is 0x100. Failing probe.
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0303> at port 0x60 on isa0
adv1: Invalid baseport of 0xf0 specified. Nearest valid baseport is 0x100. Failing probe.
adv1: Invalid baseport of 0x61 specified. Nearest valid baseport is 0x100. Failing probe.
unknown: <PNP0800> failed to probe at port 0x61 on isa0
adv1: Invalid baseport of 0xcf8 specified. Nearest valid baseport is 0x330. Failing probe.
adv1: Invalid baseport of 0x4d0 specified. Nearest valid baseport is 0x330. Failing probe.
unknown: <PNP0c02> can't assign resources (memory)
unknown: <PNP0c02> at iomem 0xe0000-0xe3fff on isa0
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0501> at port 0x3f8-0x3ff on isa0
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0501> at port 0x2f8-0x2ff on isa0
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0700> at port 0x3f0-0x3f5 on isa0
BIOS Geometries:
0:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors
1:020efe3f 0..526=527 cylinders, 0..254=255 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
bpf: lo0 attached
ad0: success setting UDMA5 on AMD chip
Creating DISK ad0
ad0: <ST380021A/3.10> ATA-5 disk at ata0-master
ad0: 76319MB (156301488 sectors), 155061 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA100
ad0: piomode=4 dmamode=2 udmamode=5 cblid=1
Waiting 15 seconds for SCSI devices to settle
(noperiph:ahc0:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.
(ahc0:A:5:0): Sending SDTR period c, offset 7f
(ahc0:A:5:0): Received SDTR period 19, offset f
Filtered to period 19, offset f
ahc0: target 5 synchronous at 10.0MHz, offset = 0xf
(ahc0:A:5:0): Sending SDTR period 19, offset f
(ahc0:A:5:0): Received SDTR period 19, offset f
Filtered to period 19, offset f
Creating DISK cd0
Mounting root from ufs:/dev/md0c
md0: invalid primary partition table: Dangerously Dedicated (ignored)
start_init: trying /sbin/init
start_init: trying /sbin/oinit
start_init: trying /sbin/init.bak
start_init: trying /stand/sysinstall
cd0 at ahc0 bus 0 target 5 lun 0
cd0: <TEAC CD-R55S 1.0R> Removable CD-ROM SCSI-2 device
cd0: Serial Number 8709911C
cd0: 10.000MB/s transfers (10.000MHz, offset 15)
cd0: cd present [330064 x 2048 byte records]
ahc1: <Adaptec aic7899 Ultra160 SCSI adapter> port 0x1800-0x18ff mem 0xe8001000-0xe8001fff irq 5 at device 13.0 on pci0
ahc1: Reading SEEPROM...done.
ahc1: Manual SE Termination
ahc1: Manual LVD Termination
ahc1: BIOS eeprom is present
ahc1: Primary Low Byte termination Enabled
ahc1: Primary High Byte termination Enabled
ahc1: Downloading Sequencer Program... 419 instructions downloaded
device_probe_and_attach: ahc1 attach returned 12
aha0: status reg test failed ff
ppc0: parallel port not found.
sn0: Cannot allocate irq
adv1: Invalid baseport of 0x61 specified. Nearest valid baseport is 0x100. Failing probe.
ahc1: <Adaptec aic7899 Ultra160 SCSI adapter> port 0x1800-0x18ff mem 0xe8001000-0xe8001fff irq 5 at device 13.0 on pci0
ahc1: Reading SEEPROM...done.
ahc1: Manual SE Termination
ahc1: Manual LVD Termination
ahc1: BIOS eeprom is present
ahc1: Primary Low Byte termination Enabled
ahc1: Primary High Byte termination Enabled
ahc1: Downloading Sequencer Program... 419 instructions downloaded
device_probe_and_attach: ahc1 attach returned 12
ahc1: <Adaptec aic7899 Ultra160 SCSI adapter> port 0x1800-0x18ff mem 0xe8001000-0xe8001fff irq 5 at device 13.0 on pci0
ahc1: Reading SEEPROM...done.
ahc1: Manual SE Termination
ahc1: Manual LVD Termination
ahc1: BIOS eeprom is present
ahc1: Primary Low Byte termination Enabled
ahc1: Primary High Byte termination Enabled
ahc1: Downloading Sequencer Program... 419 instructions downloaded
device_probe_and_attach: ahc1 attach returned 12
ahc1: <Adaptec aic7899 Ultra160 SCSI adapter> port 0x1800-0x18ff mem 0xe8001000-0xe8001fff irq 5 at device 13.0 on pci0
ahc1: Reading SEEPROM...done.
ahc1: Manual SE Termination
ahc1: Manual LVD Termination
ahc1: BIOS eeprom is present
ahc1: Primary Low Byte termination Enabled
ahc1: Primary High Byte termination Enabled
ahc1: Downloading Sequencer Program... 419 instructions downloaded
device_probe_and_attach: ahc1 attach returned 12
ahc1: <Adaptec aic7899 Ultra160 SCSI adapter> port 0x1800-0x18ff mem 0xe8001000-0xe8001fff irq 5 at device 13.0 on pci0
ahc1: Reading SEEPROM...done.
ahc1: Manual SE Termination
ahc1: Manual LVD Termination
ahc1: BIOS eeprom is present
ahc1: Primary Low Byte termination Enabled
ahc1: Primary High Byte termination Enabled
ahc1: Downloading Sequencer Program... 419 instructions downloaded
device_probe_and_attach: ahc1 attach returned 12
ahc1: <Adaptec aic7899 Ultra160 SCSI adapter> port 0x1800-0x18ff mem 0xe8001000-0xe8001fff irq 5 at device 13.0 on pci0
ahc1: Reading SEEPROM...done.
ahc1: Manual SE Termination
ahc1: Manual LVD Termination
ahc1: BIOS eeprom is present
ahc1: Primary Low Byte termination Enabled
ahc1: Primary High Byte termination Enabled
ahc1: Downloading Sequencer Program... 419 instructions downloaded
device_probe_and_attach: ahc1 attach returned 12
ahc1: <Adaptec aic7899 Ultra160 SCSI adapter> port 0x1800-0x18ff mem 0xe8001000-0xe8001fff irq 5 at device 13.0 on pci0
ahc1: Reading SEEPROM...done.
ahc1: Manual SE Termination
ahc1: Manual LVD Termination
ahc1: BIOS eeprom is present
ahc1: Primary Low Byte termination Enabled
ahc1: Primary High Byte termination Enabled
ahc1: Downloading Sequencer Program... 419 instructions downloaded
device_probe_and_attach: ahc1 attach returned 12
ahc1: <Adaptec aic7899 Ultra160 SCSI adapter> port 0x1800-0x18ff mem 0xe8001000-0xe8001fff irq 5 at device 13.0 on pci0
ahc1: Reading SEEPROM...done.
ahc1: Manual SE Termination
ahc1: Manual LVD Termination
ahc1: BIOS eeprom is present
ahc1: Primary Low Byte termination Enabled
ahc1: Primary High Byte termination Enabled
ahc1: Downloading Sequencer Program... 419 instructions downloaded
device_probe_and_attach: ahc1 attach returned 12
ahc1: <Adaptec aic7899 Ultra160 SCSI adapter> port 0x1800-0x18ff mem 0xe8001000-0xe8001fff irq 5 at device 13.0 on pci0
ahc1: Reading SEEPROM...done.
ahc1: Manual SE Termination
ahc1: Manual LVD Termination
ahc1: BIOS eeprom is present
ahc1: Primary Low Byte termination Enabled
ahc1: Primary High Byte termination Enabled
ahc1: Downloading Sequencer Program... 419 instructions downloaded
device_probe_and_attach: ahc1 attach returned 12
ahc1: <Adaptec aic7899 Ultra160 SCSI adapter> port 0x1800-0x18ff mem 0xe8001000-0xe8001fff irq 5 at device 13.0 on pci0
ahc1: Reading SEEPROM...done.
ahc1: Manual SE Termination
ahc1: Manual LVD Termination
ahc1: BIOS eeprom is present
ahc1: Primary Low Byte termination Enabled
ahc1: Primary High Byte termination Enabled
ahc1: Downloading Sequencer Program... 419 instructions downloaded
device_probe_and_attach: ahc1 attach returned 12
ahc1: <Adaptec aic7899 Ultra160 SCSI adapter> port 0x1800-0x18ff mem 0xe8001000-0xe8001fff irq 5 at device 13.0 on pci0
ahc1: Reading SEEPROM...done.
ahc1: Manual SE Termination
ahc1: Manual LVD Termination
ahc1: BIOS eeprom is present
ahc1: Primary Low Byte termination Enabled
ahc1: Primary High Byte termination Enabled
ahc1: Downloading Sequencer Program... 419 instructions downloaded
device_probe_and_attach: ahc1 attach returned 12
ahc1: <Adaptec aic7899 Ultra160 SCSI adapter> port 0x1800-0x18ff mem 0xe8001000-0xe8001fff irq 5 at device 13.0 on pci0
ahc1: Reading SEEPROM...done.
ahc1: Manual SE Termination
ahc1: Manual LVD Termination
ahc1: BIOS eeprom is present
ahc1: Primary Low Byte termination Enabled
ahc1: Primary High Byte termination Enabled
ahc1: Downloading Sequencer Program... 419 instructions downloaded
device_probe_and_attach: ahc1 attach returned 12
ahc1: <Adaptec aic7899 Ultra160 SCSI adapter> port 0x1800-0x18ff mem 0xe8001000-0xe8001fff irq 5 at device 13.0 on pci0
ahc1: Reading SEEPROM...done.
ahc1: Manual SE Termination
ahc1: Manual LVD Termination
ahc1: BIOS eeprom is present
ahc1: Primary Low Byte termination Enabled
ahc1: Primary High Byte termination Enabled
ahc1: Downloading Sequencer Program... 419 instructions downloaded
device_probe_and_attach: ahc1 attach returned 12
ahc1: <Adaptec aic7899 Ultra160 SCSI adapter> port 0x1800-0x18ff mem 0xe8001000-0xe8001fff irq 5 at device 13.0 on pci0
ahc1: Reading SEEPROM...done.
ahc1: Manual SE Termination
ahc1: Manual LVD Termination
ahc1: BIOS eeprom is present
ahc1: Primary Low Byte termination Enabled
ahc1: Primary High Byte termination Enabled
ahc1: Downloading Sequencer Program... 419 instructions downloaded
device_probe_and_attach: ahc1 attach returned 12
ahc1: <Adaptec aic7899 Ultra160 SCSI adapter> port 0x1800-0x18ff mem 0xe8001000-0xe8001fff irq 5 at device 13.0 on pci0
ahc1: Reading SEEPROM...done.
ahc1: Manual SE Termination
ahc1: Manual LVD Termination
ahc1: BIOS eeprom is present
ahc1: Primary Low Byte termination Enabled
ahc1: Primary High Byte termination Enabled
ahc1: Downloading Sequencer Program... 419 instructions downloaded
device_probe_and_attach: ahc1 attach returned 12
ahc1: <Adaptec aic7899 Ultra160 SCSI adapter> port 0x1800-0x18ff mem 0xe8001000-0xe8001fff irq 5 at device 13.0 on pci0
ahc1: Reading SEEPROM...done.
ahc1: Manual SE Termination
ahc1: Manual LVD Termination
ahc1: BIOS eeprom is present
ahc1: Primary Low Byte termination Enabled
ahc1: Primary High Byte termination Enabled
ahc1: Downloading Sequencer Program... 419 instructions downloaded
device_probe_and_attach: ahc1 attach returned 12
ahc1: <Adaptec aic7899 Ultra160 SCSI adapter> port 0x1800-0x18ff mem 0xe8001000-0xe8001fff irq 5 at device 13.0 on pci0
ahc1: Reading SEEPROM...done.
ahc1: Manual SE Termination
ahc1: Manual LVD Termination
ahc1: BIOS eeprom is present
ahc1: Primary Low Byte termination Enabled
ahc1: Primary High Byte termination Enabled
ahc1: Downloading Sequencer Program... 419 instructions downloaded
device_probe_and_attach: ahc1 attach returned 12
xl0: <3Com 3c980C Fast Etherlink XL> port 0x2000-0x207f mem 0xe8003400-0xe800347f irq 7 at device 15.0 on pci0
xl0: Ethernet address: 00:e0:81:04:ed:bc
xl0: media options word: a
xl0: found MII/AUTO
bpf: xl0 attached
xl1: <3Com 3c980C Fast Etherlink XL> port 0x2080-0x20ff mem 0xe8003800-0xe800387f irq 11 at device 16.0 on pci0
xl1: Ethernet address: 00:e0:81:04:ed:bd
xl1: media options word: a
xl1: found MII/AUTO
bpf: xl1 attached
miibus0: <MII bus> on xl0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: OUI 0x00105a, model 0x0000, rev. 0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
miibus1: <MII bus> on xl1
ukphy1: <Generic IEEE 802.3u media interface> on miibus1
ukphy1: OUI 0x00105a, model 0x0000, rev. 0
ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ad0s1: type 0x83, start 63, end = 530144, size 530082 : OK
ad0s2: type 0x7, start 530145, end = 21511034, size 20980890 : OK
ad0s3: type 0x85, start 21511035, end = 156296384, size 134785350 : OK
ad0s1: type 0x83, start 63, end = 530144, size 530082 : OK
ad0s2: type 0x7, start 530145, end = 21511034, size 20980890 : OK
ad0s3: type 0x85, start 21511035, end = 156296384, size 134785350 : OK
ad0s1: type 0x83, start 63, end = 530144, size 530082 : OK
ad0s2: type 0x7, start 530145, end = 21511034, size 20980890 : OK
ad0s3: type 0x85, start 21511035, end = 156296384, size 134785350 : OK
ad0s1: type 0x83, start 63, end = 530144, size 530082 : OK
ad0s2: type 0x7, start 530145, end = 21511034, size 20980890 : OK
ad0s3: type 0x85, start 21511035, end = 156296384, size 134785350 : OK
ad0s1: type 0x83, start 63, end = 530144, size 530082 : OK
ad0s2: type 0x7, start 530145, end = 21511034, size 20980890 : OK
ad0s3: type 0x85, start 21511035, end = 156296384, size 134785350 : OK
ad0s1: type 0x83, start 63, end = 530144, size 530082 : OK
ad0s2: type 0x7, start 530145, end = 21511034, size 20980890 : OK
ad0s3: type 0x85, start 21511035, end = 156296384, size 134785350 : OK
ad0s1: type 0x83, start 63, end = 530144, size 530082 : OK
ad0s2: type 0x7, start 530145, end = 21511034, size 20980890 : OK
ad0s3: type 0x85, start 21511035, end = 156296384, size 134785350 : OK
ad0s1: type 0x83, start 63, end = 530144, size 530082 : OK
ad0s2: type 0x7, start 530145, end = 21511034, size 20980890 : OK
ad0s3: type 0x85, start 21511035, end = 156296384, size 134785350 : OK
fd0: autoselection failed
fd0: autoselection failed
ad0s1: type 0x83, start 63, end = 530144, size 530082 : OK
ad0s2: type 0x7, start 530145, end = 21511034, size 20980890 : OK
ad0s3: type 0x85, start 21511035, end = 156296384, size 134785350 : OK
dscheck(cd0): bio_bcount 512 is not on a sector boundary (ssize 2048)
dscheck(cd0): bio_bcount 1024 is not on a sector boundary (ssize 2048)
(ahc0:A:5:0): Sending SDTR period 19, offset f
(ahc0:A:5:0): Received SDTR period 19, offset f
Filtered to period 19, offset f
(cd0:ahc0:0:5:0): Retrying Command
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?!~!UENERkVCMDkAAQACAAAAAAAAAAAAAAAAABgAAAAAAAAAjQHXypTRWUeX0Da3WGxUUMKAAAAQAAAAB5S/GF2FpEylB6XRir51UAEAAAAA>