Date: Tue, 23 Jul 2013 17:09:35 +0400 From: Andrey Fesenko <f0andrey@gmail.com> To: "freebsd-wireless@freebsd.org" <freebsd-wireless@freebsd.org>, freebsd-current <freebsd-current@freebsd.org> Subject: Not work ATH (AR9285) after update Message-ID: <CA%2BK5SrNv15gBOqHrRt2HnoohQkML7o0P5OJZ88XvMgZ=QfXiSw@mail.gmail.com>
next in thread | raw e-mail | index | archive | help
Hello,
i'm horrible news, after update my notebook not nave wi-fi :(
full update system, build and install world and kernel.
# uname -a
FreeBSD x220.local 10.0-CURRENT FreeBSD 10.0-CURRENT #0 r253562: Tue
Jul 23 14:44:07 MSK 2013
root@x220.local:/usr/obj/usr/src/sys/W_BOOK amd64
# grep ATH /usr/src/sys/amd64/conf/W_BOOK
options ATH_ENABLE_11N
options ATH_DEBUG
options ATH_DIAGAPI
ath0@pci0:3:0:0: class=0x028000 card=0x1a891a3b chip=0x002b168c
rev=0x01 hdr=0x00
vendor = 'Atheros Communications Inc.'
device = 'AR9285 Wireless Network Adapter (PCI-Express)'
class = network
# ifconfig
ath0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 2290
ether 00:25:d3:7b:94:87
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
media: IEEE 802.11 Wireless Ethernet autoselect mode 11g
status: associated
wlan0: flags=8c43<UP,BROADCAST,RUNNING,OACTIVE,SIMPLEX,MULTICAST>
metric 0 mtu 1500
ether 00:25:d3:7b:94:87
inet6 fe80::225:d3ff:fe7b:9487%wlan0 prefixlen 64 scopeid 0x4
nd6 options=23<PERFORMNUD,ACCEPT_RTADV,AUTO_LINKLOCAL>
media: IEEE 802.11 Wireless Ethernet autoselect (autoselect)
status: no carrier
ssid "" channel 8 (2447 MHz 11g)
regdomain 33411 country RU indoor ecm authmode WPA1+WPA2/802.11i
privacy MIXED deftxkey UNDEF txpower 20 bmiss 7 scanvalid 60
protmode CTS wme burst roaming MANUAL
# ifconfig wlan0 list scan
SSID/MESH ID BSSID CHAN RATE S:N INT CAPS
APT-SPB2 b8:a3:86:4a:75:6a 6 54M -92:-96 100 EP HTCAP
WPA RSN WME WPS
THD1 74:ea:3a:d1:37:46 10 54M -85:-96 100 EP RSN HTCAP WME
Balt1 00:90:4c:c1:00:00 1 54M -90:-96 100 EP RSN
TP-LINK_904D2A 64:70:02:90:4d:2a 11 54M -94:-96 100 EPS RSN
HTCAP WME ATH WPS
/var/log/messages
...
Jul 23 15:34:24 x220 wpa_supplicant[669]: wlan0: CTRL-EVENT-TERMINATING
Jul 23 15:34:24 x220 kernel: wlan0: Ethernet address: 00:25:d3:7b:94:87
Jul 23 15:34:24 x220 devd: Executing '/etc/pccard_ether wlan0 start'
Jul 23 15:34:24 x220 wpa_supplicant[2563]: Successfully initialized
wpa_supplicant
Jul 23 15:34:24 x220 wpa_supplicant[2571]: Successfully initialized
wpa_supplicant
Jul 23 15:34:24 x220 wpa_supplicant[2571]: ctrl_iface exists and seems
to be in use - cannot override it
Jul 23 15:34:24 x220 wpa_supplicant[2571]: Delete
'/var/run/wpa_supplicant/wlan0' manually if it is not used anymore
Jul 23 15:34:24 x220 wpa_supplicant[2571]: Failed to initialize
control interface '/var/run/wpa_supplicant'. You may have another
wpa_supplicant process already running or the file was left by an
unclean termination of wpa_supplicant in which case you will need to
manually remove this file before starting wpa_supplicant again.
Jul 23 15:34:24 x220 wpa_supplicant[2571]: ioctl[SIOCS80211, op=26,
val=0, arg_len=0]: Operation not supported
Jul 23 15:34:24 x220 wpa_supplicant[2571]: ioctl[SIOCS80211, op=26,
val=0, arg_len=0]: Operation not supported
Jul 23 15:34:24 x220 root: /etc/rc.d/wpa_supplicant: WARNING: failed
to start wpa_supplicant
Jul 23 15:34:24 x220 wpa_supplicant[2572]: ioctl[SIOCS80211, op=103,
val=0, arg_len=128]: Operation now in progress
Jul 23 15:34:24 x220 wpa_supplicant[2572]: wlan0: Failed to initiate AP scan
Jul 23 15:34:25 x220 wpa_supplicant[2572]: ioctl[SIOCS80211, op=103,
val=0, arg_len=128]: Operation now in progress
Jul 23 15:34:25 x220 wpa_supplicant[2572]: wlan0: Failed to initiate AP scan
Jul 23 15:34:26 x220 wpa_supplicant[2572]: ioctl[SIOCS80211, op=103,
val=0, arg_len=128]: Operation now in progress
Jul 23 15:34:26 x220 kernel: ath0: ath_reset_grablock: didn't finish
after 10 iterations
Jul 23 15:34:26 x220 kernel: ath0: ath_reset_grablock: warning,
recursive reset path!
Jul 23 15:34:26 x220 kernel: ath0: ath_reset: concurrent reset! Danger!
Jul 23 15:34:26 x220 kernel: ath0: ath_raw_xmit: sc_inreset_cnt > 0; bailing
Jul 23 15:34:26 x220 kernel: ath0: ath_raw_xmit: sc_inreset_cnt > 0; bailing
Jul 23 15:34:26 x220 wpa_supplicant[2572]: wlan0: Failed to initiate AP scan
Jul 23 15:34:27 x220 wpa_supplicant[2572]: ioctl[SIOCS80211, op=103,
val=0, arg_len=128]: Operation now in progress
Jul 23 15:34:27 x220 wpa_supplicant[2572]: wlan0: Failed to initiate AP scan
Jul 23 15:34:29 x220 wpa_supplicant[2572]: ioctl[SIOCS80211, op=103,
val=0, arg_len=128]: Operation now in progress
Jul 23 15:34:29 x220 kernel: ath0: ath_reset_grablock: didn't finish
after 10 iterations
Jul 23 15:34:29 x220 kernel: ath0: ath_reset_grablock: warning,
recursive reset path!
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CA%2BK5SrNv15gBOqHrRt2HnoohQkML7o0P5OJZ88XvMgZ=QfXiSw>