Date: Fri, 10 Mar 2006 11:44:09 +0100 From: =?iso-8859-2?Q?=A3ukasz_Dolata?= <ldolata@rose.man.poznan.pl> To: freebsd-acpi@freebsd.org Subject: Reboot hangs if ACPI is enabled Message-ID: <1996820273.20060310114409@man.poznan.pl>
next in thread | raw e-mail | index | archive | help
Hi all, For last few days I worked on installation of FreeBSD 6.0 amd64 with SMP and PPS_SYNC options on my server. System worked stable. The server configurati= on is: - Intel=AE Server Board SE7520AF2 - 2 x Xeon 3.0Ghz - 3 x disk SCSI used with on-board SCSI Controller(RAID 5 configuration) The problem is that if ACPI is enabled, invoking the commands: reboot, shutdown -r now hangs server after message "Shutting down ACPI". The only way to start server is to press power button. I have upgraded BIOS version for the motherboard and server still hangs. I have searched for some solutions but with no effect. Any help would be appreciated. Bellow is shown dmesg output: Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 6.0-RELEASE-p5 #5: Fri Mar 10 10:39:26 CET 2006 :/usr/obj/usr/src/s= ys/PPS-SMP ACPI APIC Table: <A M I OEMAPIC > Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Xeon(TM) CPU 3.00GHz (2992.51-MHz K8-class CPU) Origin =3D "GenuineIntel" Id =3D 0xf43 Stepping =3D 3 Features=3D0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PG= E,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=3D0x641d<SSE3,RSVD2,MON,DS_CPL,CNTX-ID,CX16,<b14>> AMD Features=3D0x20100800<SYSCALL,NX,LM> Hyperthreading: 2 logical CPUs real memory =3D 2147352576 (2047 MB) avail memory =3D 2062901248 (1967 MB) FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 cpu2 (AP): APIC ID: 6 cpu3 (AP): APIC ID: 7 ioapic0 <Version 2.0> irqs 0-23 on motherboard ioapic1 <Version 2.0> irqs 24-47 on motherboard ioapic2 <Version 2.0> irqs 48-71 on motherboard ioapic3 <Version 2.0> irqs 72-95 on motherboard ioapic4 <Version 2.0> irqs 96-119 on motherboard acpi0: <A M I OEMRSDT> on motherboard acpi0: Power Button (fixed) pci_link0: <ACPI PCI Link LNKA> irq 10 on acpi0 pci_link1: <ACPI PCI Link LNKB> irq 11 on acpi0 pci_link2: <ACPI PCI Link LNKC> irq 5 on acpi0 pci_link3: <ACPI PCI Link LNKD> irq 7 on acpi0 pci_link4: <ACPI PCI Link LNKE> irq 0 on acpi0 pci_link5: <ACPI PCI Link LNKF> irq 0 on acpi0 pci_link6: <ACPI PCI Link LNKG> irq 0 on acpi0 pci_link7: <ACPI PCI Link LNKH> irq 15 on acpi0 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 cpu0: <ACPI CPU> on acpi0 acpi_throttle0: <ACPI CPU Throttling> on cpu0 cpu1: <ACPI CPU> on acpi0 acpi_throttle1: <ACPI CPU Throttling> on cpu1 acpi_throttle1: failed to attach P_CNT device_attach: acpi_throttle1 attach returned 6 cpu2: <ACPI CPU> on acpi0 acpi_throttle2: <ACPI CPU Throttling> on cpu2 acpi_throttle2: failed to attach P_CNT device_attach: acpi_throttle2 attach returned 6 cpu3: <ACPI CPU> on acpi0 acpi_throttle3: <ACPI CPU Throttling> on cpu3 acpi_throttle3: failed to attach P_CNT device_attach: acpi_throttle3 attach returned 6 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: <unknown> at device 0.1 (no driver attached) pci0: <base peripheral> at device 1.0 (no driver attached) pcib1: <ACPI PCI-PCI bridge> irq 16 at device 2.0 on pci0 pci7: <ACPI PCI bus> on pcib1 pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci7 pci9: <ACPI PCI bus> on pcib2 pci7: <base peripheral, interrupt controller> at device 0.1 (no driver atta= ched) pcib3: <ACPI PCI-PCI bridge> at device 0.2 on pci7 pci8: <ACPI PCI bus> on pcib3 em0: <Intel(R) PRO/1000 Network Connection, Version - 2.1.7> port 0xe880-0x= e8bf mem 0xfeba0000-0xfebbffff irq 52 at device 4.0 on pci8 em0: Ethernet address: 00:07:e9:33:1f:76 em0: Speed:N/A Duplex:N/A em1: <Intel(R) PRO/1000 Network Connection, Version - 2.1.7> port 0xec00-0x= ec3f mem 0xfebe0000-0xfebfffff irq 53 at device 4.1 on pci8 em1: Ethernet address: 00:07:e9:33:1f:77 em1: Speed:N/A Duplex:N/A pci7: <base peripheral, interrupt controller> at device 0.3 (no driver atta= ched) pcib4: <ACPI PCI-PCI bridge> irq 16 at device 4.0 on pci0 pci6: <ACPI PCI bus> on pcib4 pcib5: <ACPI PCI-PCI bridge> irq 16 at device 6.0 on pci0 pci5: <ACPI PCI bus> on pcib5 pcib6: <ACPI PCI-PCI bridge> irq 16 at device 7.0 on pci0 pci2: <ACPI PCI bus> on pcib6 pcib7: <ACPI PCI-PCI bridge> at device 0.0 on pci2 pci4: <ACPI PCI bus> on pcib7 amr0: <LSILogic MegaRAID 1.51> mem 0xfbff0000-0xfbffffff,0xfe9c0000-0xfe9ff= fff irq 86 at device 14.0 on pci4 amr0: <LSILogic Intel(R) RAID Controller SROMBU42E> Firmware 514O, BIOS H43= 1, 256MB RAM pci2: <base peripheral, interrupt controller> at device 0.1 (no driver atta= ched) pcib8: <ACPI PCI-PCI bridge> at device 0.2 on pci2 pci3: <ACPI PCI bus> on pcib8 pci2: <base peripheral, interrupt controller> at device 0.3 (no driver atta= ched) uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xbc00-0xbc1f irq 1= 6 at device 29.0 on pci0 uhci0: [GIANT-LOCKED] usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xc000-0xc01f irq 1= 9 at device 29.1 on pci0 uhci1: [GIANT-LOCKED] usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xc080-0xc09f irq 1= 8 at device 29.2 on pci0 uhci2: [GIANT-LOCKED] usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfcfffc00-0xfcffffff irq 23= at device 29.7 on pci0 ehci0: [GIANT-LOCKED] usb3: EHCI version 1.0 usb3: companion controllers, 2 ports each: usb0 usb1 usb2 usb3: <EHCI (generic) USB 2.0 controller> on ehci0 usb3: USB revision 2.0 uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub3: 6 ports with 6 removable, self powered pcib9: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci1: <ACPI PCI bus> on pcib9 pci1: <display, VGA> at device 12.0 (no driver attached) isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH5 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177= ,0x376,0xfc00-0xfc0f at device 31.1 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 pci0: <serial bus, SMBus> at device 31.3 (no driver attached) acpi_button0: <Power Button> on acpi0 sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acp= i0 sio0: type 16550A sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on= acpi0 fdc0: [FAST] device_attach: fdc0 attach returned 12 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on= acpi0 fdc0: [FAST] device_attach: fdc0 attach returned 12 orm0: <ISA Option ROMs> at iomem 0xc0000-0xca7ff,0xcd000-0xcdfff,0xce000-0x= cefff on isa0 ppc0: cannot reserve I/O port range sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=3D0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounters tick every 1.000 msec acd0: DVDROM <LITE-ON DVD SOHD-16P9S/FS09> at ata0-slave UDMA33 amrd0: <LSILogic MegaRAID logical drive> on amr0 amrd0: 68664MB (140623872 sectors) RAID 5 (optimal) SMP: AP CPU #1 Launched! SMP: AP CPU #3 Launched! SMP: AP CPU #2 Launched! Trying to mount root from ufs:/dev/amrd0s1a --=20 ____________________________________________________________________ =A3ukasz Dolata Network Research and Development ldolata@man.poznan.pl Poznan Supercomputing and Networking Center +48 61 858 20 28 www.man.poznan.pl ______________________________________________________________________
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1996820273.20060310114409>