Date: Fri, 5 Sep 2003 17:38:00 +0400 From: Dmitry Sivachenko <demon@freebsd.org> To: stable@freebsd.org Subject: Recent -STABLE panics during boot (100% reproducable) Message-ID: <20030905133800.GA30267@fling-wing.demos.su>
next in thread | raw e-mail | index | archive | help
Hello!
Using very recent -STABLE we encounter the following panic during boot:
<snip>
ipfw2 initialized, divert enabled, rule-based forwarding enabled, default to deny, logging limited to 100 packets/entry by default
Waiting 5 seconds for SCSI devices to settle
SMP: AP CPU #1 Launched!
panic: malloc(M_WAITOK) in interrupt context
mp_lock = 00000001; cpuid = 0; lapic.id = 00000000
boot() called on cpu#0
syncing disks...
This is 100% reproducable on two different machines.
I am providing our kernel config file below. If we remove two
INVARIANTS-related options, the panic goes away.
machine i386
cpu I586_CPU
cpu I686_CPU
ident GENERIC
maxusers 0
makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols
options INVARIANTS
options INVARIANT_SUPPORT
options INET #InterNETworking
options FFS #Berkeley Fast Filesystem
options FFS_ROOT #FFS usable as root device [keep this!]
options SOFTUPDATES #Enable FFS soft updates support
options UFS_DIRHASH
options PROCFS #Process filesystem
options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!]
options SCSI_DELAY=5000 #Delay (in ms) before probing SCSI
options UCONSOLE #Allow users to grab the console
options USERCONFIG #boot -c editor
options VISUAL_USERCONFIG #visual boot -c editor
options NMBCLUSTERS=12000
options SMP # Symmetric MultiProcessor Kernel
options APIC_IO # Symmetric (APIC) I/O
options P1003_1B
options _KPOSIX_PRIORITY_SCHEDULING
options _KPOSIX_VERSION=199309L
options HZ=100
device isa
device pci
device fdc0 at isa? port IO_FD1 irq 6 drq 2
device fd0 at fdc0 drive 0
device ahc0 # AHA2940 and onboard AIC7xxx devices
device ahc1 # AHA2940 and onboard AIC7xxx devices
device scbus # SCSI bus (required)
device da # Direct Access (disks)
device scbus0 at ahc0 bus 0 # Single bus device
device cd # CD
device pass
device atkbdc0 at isa? port IO_KBD
device atkbd0 at atkbdc? irq 1 flags 0x1
device psm0 at atkbdc? irq 12
device vga0 at isa?
device sc0 at isa? flags 0x100
device npx0 at nexus? port IO_NPX irq 13
device sio0 at isa? port IO_COM1 flags 0x10 irq 4
device sio1 at isa? port IO_COM2 irq 3
device ppc0 at isa? irq 7
device ppbus # Parallel port bus (required)
device miibus # MII bus support
device fxp # Intel EtherExpress PRO/100B (82557, 82558)
pseudo-device loop # Network loopback
pseudo-device ether # Ethernet support
pseudo-device pty # Pseudo-ttys (telnet etc)
pseudo-device vn
pseudo-device bpf 2 #Berkeley packet filter
device smbus # Bus support, required for smb below.
device intpm
device ichsmb
device smb
options ICMP_BANDLIM
options IPFIREWALL #firewall
options IPFIREWALL_VERBOSE #enable logging to syslogd(8)
options IPFIREWALL_FORWARD #enable transparent proxy support
options IPFIREWALL_VERBOSE_LIMIT=100 #limit verbosity
options IPDIVERT #divert sockets
options IPFW2
options MAXDSIZ="(1024*1024*1024)"
options DFLDSIZ="(1024*1024*1024)"
options INCLUDE_CONFIG_FILE
Full boot output:
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.9-PRERELEASE #0: Fri Sep 5 16:55:35 MSD 2003
andy@west.demos.su:/mnt/obj/usr/src/sys/MX1
Timecounter "i8254" frequency 1193182 Hz
CPU: Intel(R) Pentium(R) III CPU family 1266MHz (1266.07-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6b1 Stepping = 1
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 1073676288 (1048512K bytes)
avail memory = 1042145280 (1017720K bytes)
Programming 16 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
Programming 16 pins in IOAPIC #1
FreeBSD/SMP: Multiprocessor motherboard: 2 CPUs
cpu0 (BSP): apic id: 0, version: 0x00040011, at 0xfee00000
cpu1 (AP): apic id: 1, version: 0x00040011, at 0xfee00000
io0 (APIC): apic id: 4, version: 0x000f0011, at 0xfec00000
io1 (APIC): apic id: 5, version: 0x000f0011, at 0xfec01000
Preloaded elf kernel "kernel" at 0xc02db000.
Pentium Pro MTRR support enabled
Using $PIR table, 9 entries at 0xc00f5250
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <ServerWorks NB6635 3.0LE host to PCI bridge> on motherboard
IOAPIC #1 intpin 4 -> irq 2
IOAPIC #1 intpin 6 -> irq 5
IOAPIC #1 intpin 15 -> irq 9
pci0: <PCI bus> on pcib0
pci0: <ATI Mach64-GR graphics accelerator> at 3.0 irq 2
fxp0: <Intel 82559 Pro/100 Ethernet> port 0xc000-0xc03f mem 0xfe300000-0xfe3fffff,0xfe6fd000-0xfe6fdfff irq 5 at device 4.0 on pci0
fxp0: Ethernet address 00:30:48:23:9e:df
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp1: <Intel 82559 Pro/100 Ethernet> port 0xc400-0xc43f mem 0xfe500000-0xfe5fffff,0xfe6fe000-0xfe6fefff irq 9 at device 6.0 on pci0
fxp1: Ethernet address 00:30:48:23:9e:e0
inphy1: <i82555 10/100 media interface> on miibus1
inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <ServerWorks IB6566 PCI to ISA bridge> at device 15.0 on pci0
isa0: <ISA bus> on isab0
pci0: <Unknown PCI ATA controller> at 15.1
pci0: <OHCI USB controller> at 15.2 irq 0
pcib1: <ServerWorks NB6635 3.0LE host to PCI bridge> on motherboard
IOAPIC #1 intpin 8 -> irq 10
IOAPIC #1 intpin 12 -> irq 11
pci1: <PCI bus> on pcib1
fxp2: <Intel 82558 Pro/100 Ethernet> port 0xe400-0xe41f mem 0xfea00000-0xfeafffff,0xfbdff000-0xfbdfffff irq 10 at device 1.0 on pci1
fxp2: Ethernet address 00:50:8b:02:2c:80
inphy2: <i82555 10/100 media interface> on miibus2
inphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ahc0: <Adaptec aic7892 Ultra160 SCSI adapter> port 0xe800-0xe8ff mem 0xfebff000-0xfebfffff irq 11 at device 3.0 on pci1
aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0
pmtimer0 on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model NetMouse/NetScroll Optical, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: Broken MP table detected: 8254 is not connected to IOAPIC #0 intpin 2
APIC_IO: routing 8254 via 8259 and IOAPIC #0 intpin 0
ipfw2 initialized, divert enabled, rule-based forwarding enabled, default to deny, logging limited to 100 packets/entry by default
Waiting 5 seconds for SCSI devices to settle
SMP: AP CPU #1 Launched!
panic: malloc(M_WAITOK) in interrupt context
mp_lock = 00000001; cpuid = 0; lapic.id = 00000000
boot() called on cpu#0
syncing disks...
done
Uptime: 8s
Automatic reboot in 15 seconds - press a key on the console to abort
--> Press a key on the console to reboot,
--> or switch off the system now.
Rebooting...
cpu_reset called on cpu#0
cpu_reset: Stopping other CPUs
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20030905133800.GA30267>