Skip site navigation (1)Skip section navigation (2)
Date:      Sun, 11 Mar 2001 00:42:09 -0500
From:      "Michael Conlen" <meconlen@obfuscated.net>
To:        "Duraid" <latif2221@home.com>, <freebsd-questions@FreeBSD.ORG>
Subject:   RE: dirty booting
Message-ID:  <NFBBJNNKKLIPPJPMCEAPKEDLCBAA.meconlen@obfuscated.net>
In-Reply-To: <3AAB078E.778D1C94@home.com>

next in thread | previous in thread | raw e-mail | index | archive | help
Sorry, the second one. I ran in to this a while ago and my system wouldn't
boot. There was some bad code in the -stable line at that point.

I also presumed you have updated to freebsd-stable.

--
Groove On Dude
Michael Conlen
Obfuscated Networking
meconlen@obfuscated.net


> -----Original Message-----
> From: duraid [mailto:duraid]On Behalf Of Duraid
> Sent: Sunday, March 11, 2001 12:05 AM
> To: Michael Conlen; freebsd-questions@FreeBSD.ORG
> Subject: Re: dirty booting
>
>
> fixed what? 1 or 2?
>
> duraid
>
> Michael Conlen wrote:
>
> > What's the date of your cvs? I think they fixed this a while
> ago, unless it
> > cropped back up again.
> >
> > --
> > Groove On Dude
> > Michael Conlen
> > Obfuscated Networking
> > meconlen@obfuscated.net
> >
> > > -----Original Message-----
> > > From: owner-freebsd-questions@FreeBSD.ORG
> > > [mailto:owner-freebsd-questions@FreeBSD.ORG]On Behalf Of Duraid
> > > Sent: Saturday, March 10, 2001 11:32 PM
> > > To: freebsd-questions@FreeBSD.ORG
> > > Subject: dirty booting
> > >
> > >
> > > here are parts of dmesg output:
> > > 1.
> > > config> en pcic0
> > > No such device: pcic0
> > > Invalid command or syntax.  Type `?' for help.
> > > config> po pcic0 0x3e0
> > > No such device: pcic0
> > > Invalid command or syntax.  Type `?' for help.
> > > config> ir pcic0 0
> > > No such device: pcic0
> > > Invalid command or syntax.  Type `?' for help.
> > > config> iom pcic0 0xd0000
> > > No such device: pcic0
> > > Invalid command or syntax.  Type `?' for help.
> > > config> f pcic0 0
> > > No such device: pcic0
> > > Invalid command or syntax.  Type `?' for help.
> > >
> > > 2. this part is causing 5 seconds delay before each ata0: resetting
> > > devices .. message: and what is the typically: not found????
> > >
> > > ata0-master: DMA limited to UDMA33, non-ATA66 compliant cable
> > > ad0: 8063MB <FUJITSU MPD3084AT> [16383/16/63] at ata0-master WDMA2
> > > acd0: CDROM <CD-ROM 24X/AKOx> at ata0-slave using PIO4
> > > Mounting root from ufs:/dev/ad0s2a
> > > ad0: READ command timeout tag=0 serv=0 - resetting
> > > ata0: resetting devices .. ata0-master: DMA limited to
> UDMA33, non-ATA66
> > > compliant cable
> > > done
> > > ad0: READ command timeout tag=0 serv=0 - resetting
> > > ata0: resetting devices .. ata0-master: DMA limited to
> UDMA33, non-ATA66
> > > compliant cable
> > > done
> > > ad0: READ command timeout tag=0 serv=0 - resetting
> > > ata0: resetting devices .. ata0-master: DMA limited to
> UDMA33, non-ATA66
> > > compliant cable
> > > done
> > > ad0: READ command timeout tag=0 serv=0 - resetting
> > > ad0: trying fallback to PIO mode
> > > ata0: resetting devices .. done
> > > typically: not found
> > >
> > > Duraid
> > >
> > >
> > > To Unsubscribe: send mail to majordomo@FreeBSD.org
> > > with "unsubscribe freebsd-questions" in the body of the message
> > >
>
>


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?NFBBJNNKKLIPPJPMCEAPKEDLCBAA.meconlen>