Date: Sat, 07 Mar 2026 12:45:45 +0000 From: bugzilla-noreply@freebsd.org To: wireless@FreeBSD.org Subject: [Bug 293645] iwlwifi doesn't connect using VHT80 anymore Message-ID: <bug-293645-21060@https.bugs.freebsd.org/bugzilla/>
index | next in thread | raw e-mail
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=293645 Bug ID: 293645 Summary: iwlwifi doesn't connect using VHT80 anymore Product: Base System Version: 14.4-STABLE Hardware: Any OS: Any Status: New Severity: Affects Only Me Priority: --- Component: wireless Assignee: wireless@FreeBSD.org Reporter: vsasjason@gmail.com (Setting Version to 14.4-S, but actual affected version is 14.4-R which isn't available in the list yet.) After upgrading to 14.4-RELEASE, I'm getting only up to VHT40/ac/400Mbps: wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=0 ether c2:c0:e9:21:94:d7 inet 10.0.55.66 netmask 0xffffffc0 broadcast 10.0.55.127 groups: wlan ssid "<REDACTED>" channel 64 (5320 MHz 11a vht/40-) bssid 02:16:6f:40:8a:d0 regdomain ETSI country UA authmode WPA2/802.11i privacy ON deftxkey UNDEF AES-CCM 2:128-bit AES-CCM ucast:128-bit txpower 20 bmiss 7 mcastrate 6 mgmtrate 6 scanvalid 60 -ampdutx ampdurx ampdulimit 64k -amsdutx amsdurx shortgi -ldpctx ldpcrx -uapsd vht vht40 vht80 vht160 -vht80p80 wme roaming MANUAL parent interface: iwlwifi0 media: IEEE 802.11 Wireless Ethernet autoselect mode 11ac status: associated nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> Rebooting into 14.3-RELEASE immediately brings me back to VHT80/ac/867Mbps: wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=0 ether c2:c0:e9:21:94:d7 inet 10.0.55.66 netmask 0xffffffc0 broadcast 10.0.55.127 groups: wlan ssid "<REDACTED>" channel 64 (5320 MHz 11a vht/80-) bssid 02:16:6f:40:8a:d0 regdomain ETSI country UA authmode WPA2/802.11i privacy ON deftxkey UNDEF AES-CCM 2:128-bit txpower 20 bmiss 7 mcastrate 6 mgmtrate 6 scanvalid 60 -ampdutx ampdurx ampdulimit 64k -amsdutx amsdurx shortgi -ldpctx ldpcrx -uapsd vht vht40 vht80 vht160 -vht80p80 wme roaming MANUAL parent interface: iwlwifi0 media: IEEE 802.11 Wireless Ethernet autoselect mode 11ac status: associated nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> pciconf: iwlwifi0@pci0:3:0:0: class=0x028000 rev=0x1a hdr=0x00 vendor=0x8086 device=0x2725 subvendor=0x8086 subdevice=0x0024 vendor = 'Intel Corporation' device = 'Wi-Fi 6E(802.11ax) AX210/AX1675* 2x2 [Typhoon Peak]' class = network cap 01[c8] = powerspec 3 supports D0 D3 current D0 cap 05[d0] = MSI supports 1 message, 64 bit cap 10[40] = PCI-Express 2 endpoint max data 128(128) FLR RO NS max read 128 link x1(x1) speed 5.0(5.0) ASPM L1(L1) ClockPM enabled cap 11[80] = MSI-X supports 16 messages, enabled Table in map 0x10[0x2000], PBA in map 0x10[0x3000] ecap 0001[100] = AER 1 0 fatal 0 non-fatal 1 corrected ecap 0018[14c] = LTR 1 ecap 001e[154] = L1 PM Substates 1 kernel detection messages: Mar 7 13:41:00 jnb kernel: [7] iwlwifi0: <iwlwifi> mem 0xed200000-0xed203fff at device 0.0 on pci3 Mar 7 13:41:00 jnb kernel: [7] iwlwifi0: Detected crf-id 0x400410, cnv-id 0x400410 wfpm id 0x80000000 Mar 7 13:41:00 jnb kernel: [7] iwlwifi0: PCI dev 2725/0024, rev=0x420, rfid=0x10d000 Mar 7 13:41:00 jnb kernel: [7] iwlwifi0: Detected Intel(R) Wi-Fi 6 AX210 160MHz Mar 7 13:41:00 jnb kernel: [7] iwlwifi0: successfully loaded firmware image 'iwlwifi-ty-a0-gf-a0-89.ucode' Mar 7 13:41:00 jnb kernel: [7] iwlwifi0: capa flags index 4 larger than supported by driver Mar 7 13:41:00 jnb kernel: [7] iwlwifi0: TLV_FW_FSEQ_VERSION: FSEQ Version: 0.0.2.42 Mar 7 13:41:00 jnb kernel: [7] iwl-debug-yoyo.bin: could not load binary firmware /boot/firmware/iwl-debug-yoyo.bin either Mar 7 13:41:00 jnb kernel: [7] iwl-debug-yoyo.bin: could not load binary firmware /boot/firmware/iwl-debug-yoyo.bin either Mar 7 13:41:00 jnb kernel: [7] iwl-debug-yoyo_bin: could not load binary firmware /boot/firmware/iwl-debug-yoyo_bin either Mar 7 13:41:00 jnb kernel: [7] iwl_debug_yoyo_bin: could not load binary firmware /boot/firmware/iwl_debug_yoyo_bin either Mar 7 13:41:00 jnb kernel: [7] iwlwifi0: loaded firmware version 89.7207fc64.0 ty-a0-gf-a0-89.ucode op_mode iwlmvm Mar 7 13:41:00 jnb kernel: [7] iwlwifi0: WFPM_UMAC_PD_NOTIFICATION: 0x20 Mar 7 13:41:00 jnb kernel: [7] iwlwifi0: WFPM_LMAC2_PD_NOTIFICATION: 0x1f Mar 7 13:41:00 jnb kernel: [7] iwlwifi0: WFPM_AUTH_KEY_0: 0x90 Mar 7 13:41:00 jnb kernel: [7] iwlwifi0: CNVI_SCU_SEQ_DATA_DW9: 0x0 Mar 7 13:41:00 jnb kernel: [7] iwlwifi0: successfully loaded firmware image 'iwlwifi-ty-a0-gf-a0.pnvm' Mar 7 13:41:00 jnb kernel: [7] iwlwifi0: loaded PNVM version 285b3568 Mar 7 13:41:00 jnb kernel: [7] iwlwifi0: Detected RF GF, rfid=0x10d000 Mar 7 13:41:00 jnb kernel: [7] iwlwifi0: base HW address: 42:f2:aa:e9:c9:ac Mar 7 13:41:00 jnb kernel: [8] iwlwifi0: WFPM_UMAC_PD_NOTIFICATION: 0x20 Mar 7 13:41:00 jnb kernel: [8] iwlwifi0: WFPM_LMAC2_PD_NOTIFICATION: 0x1f Mar 7 13:41:00 jnb kernel: [8] iwlwifi0: WFPM_AUTH_KEY_0: 0x90 Mar 7 13:41:00 jnb kernel: [8] iwlwifi0: CNVI_SCU_SEQ_DATA_DW9: 0x0 AP is MikroTik wAPG-5HaxD2HaxD which supports and currently operating up to VHT160 both in ac/ax: [dsjk283@Mikrotik] > /interface/wifi/radio/print proplist=hw-type,bands where .id=*3 Columns: HW-TYPE, BANDS # HW-TYPE BANDS 2 QCN6122 5ghz-a:20mhz 5ghz-n:20mhz,20/40mhz 5ghz-ac:20mhz,20/40mhz,20/40/80mhz,20/40/80/160mhz 5ghz-ax:20mhz,20/40mhz,20/40/80mhz,20/40/80/160mhz [dsjk283@Mikrotik] > /interface/wifi/monitor 0 once proplist=channel channel: 5320/ax/eeeeeeeC/D [dsjk283@Mikrotik] > -- You are receiving this mail because: You are the assignee for the bug.home | help
Want to link to this message? Use this
URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?bug-293645-21060>