Date: Wed, 28 Nov 2001 00:11:33 +1100 From: Danny <dannyho@bugpond.net.au> To: questions@freebsd.org Cc: freebsd-multimedia@freebsd.org Subject: 16 Bit Integrated Sound(onboard ) ? Message-ID: <01112800113300.00408@freebsd.freebsd.org>
next in thread | raw e-mail | index | archive | help
Hello,
I am having some problem with my ondboard sound card. I did the things
listed below and I still cannot get any sound.
1) I have the following sound card.
- 16 Bit Integrated Sound(onboard)
2)I have added the following and compiled the KERNEL
-options PNPBIOS
-device pcm
3) Here is the output of dmesg
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.3-RELEASE #0: Sun Nov 25 22:22:24 EST 2001
dannyho@freebsd.freebsd.org:/usr/src/sys/compile/MYKERNEL
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (933.37-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x683 Stepping = 3
Features=0x387f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,SSE>
real memory = 117374976 (114624K bytes)
avail memory = 109514752 (106948K bytes)
Preloaded elf kernel "kernel" at 0xc049e000.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <NVidia Riva Integrated TNT2 graphics accelerator> at 0.0 irq 11
ohci0: mem 0xdffdf000-0xdffdffff irq 10 at device 2.0 on pci0
usb0: OHCI version 1.0, legacy support
usb0: on ohci0
usb0: USB revision 1.0
uhub0: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
isab0: at device 7.0 on pci0
isa0: on isab0
pcm0: <CMedia CMI8738> port 0xd800-0xd8ff irq 5 at device 12.0 on pci0
pci0: (vendor=0x13f6, dev=0x0211) at 12.1 irq 9
sis0: <SiS 900 10/100BaseTX> port 0xd400-0xd4ff mem 0xdffde000-0xdffdefff
irq 3 at device 14.0 on pci0
sis0: Ethernet address: 00:d0:09:cb:97:8b
miibus0: <MII bus> on sis0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
atapci0: port 0xffa0-0xffaf irq 0 at device 15.0 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ed0: <NE2000 PCI Ethernet (RealTek 8029)> port 0xd000-0xd01f irq 3 at
device 20.0 on pci0
ed0: address 00:4f:49:0a:1f:8d, type NE2000 (16 bit)
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/1 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
unknown: <PNP0000> can't assign resources
unknown: <PNP0303> can't assign resources
unknown: <PNP0501> can't assign resources
unknown: <PNP0401> can't assign resources
unknown: <PNP0700> can't assign resources
unknown: <PNP0a03> can't assign resources
unknown: <PNP0f13> can't assign resources
ata0-master: DMA limited to UDMA33, non-ATA66 compliant cable
ad0: 19092MB <WDC WD200AB-00BVA0> [38792/16/63] at ata0-master UDMA33
acd0: DVD-ROM <SAMSUNG DVD-ROM SD-612F> at ata0-slave using PIO4
Mounting root from ufs:/dev/ad0s1a
pid 384 (artsd), uid 1000: exited on signal 11 (core dumped)
4) Here is the output of cat /dev/sndstat
FreeBSD Audio Driver (newpcm) Nov 25 2001 22:21:55
Installed devices:
pcm0: <CMedia CMI8738> at io 0xd800 irq 5 (1p/1r channels duplex)
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?01112800113300.00408>