Date: Sat, 3 Feb 2001 12:11:19 -0900 From: Beech Rintoul <akbeech@anchoragerescue.org> To: freebsd-questions@freebsd.org Subject: Sound config Message-ID: <01020312111900.12123@galaxy.anchoragerescue.org>
next in thread | raw e-mail | index | archive | help
Hi I'm trying to set up sound on a Compaq Presario. I did everything by the book, but still no sound. Please help Beech Feb 3 11:15:40 intake /kernel: Copyright (c) 1992-2001 The FreeBSD Project. Feb 3 11:15:40 intake /kernel: Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 Feb 3 11:15:40 intake /kernel: The Regents of the University of California. All rights reserved. Feb 3 11:15:40 intake /kernel: FreeBSD 4.2-STABLE #0: Sat Feb 3 11:04:07 GMT 2001 Feb 3 11:15:40 intake /kernel: root@intake.anchoragerescue.org:/galaxy/usr/src/sys/compile/INTAKE Feb 3 11:15:40 intake /kernel: Timecounter "i8254" frequency 1193182 Hz Feb 3 11:15:40 intake /kernel: CPU: AMD Athlon(tm) Processor (901.60-MHz 686-class CPU) Feb 3 11:15:40 intake /kernel: Origin = "AuthenticAMD" Id = 0x642 Stepping = 2 Feb 3 11:15:40 intake /kernel: Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR> Feb 3 11:15:40 intake /kernel: AMD Features=0xc0440000<<b18>,AMIE,DSP,3DNow!> Feb 3 11:15:40 intake /kernel: real memory = 134217728 (131072K bytes) Feb 3 11:15:40 intake /kernel: avail memory = 126615552 (123648K bytes) Feb 3 11:15:40 intake /kernel: Preloaded elf kernel "kernel" at 0xc03fd000. Feb 3 11:15:40 intake /kernel: Pentium Pro MTRR support enabled Feb 3 11:15:40 intake /kernel: md0: Malloc disk Feb 3 11:15:40 intake /kernel: npx0: <math processor> on motherboard Feb 3 11:15:40 intake /kernel: npx0: INT 16 interface Feb 3 11:15:40 intake /kernel: pcib0: <Host to PCI bridge> on motherboard Feb 3 11:15:40 intake /kernel: pci0: <PCI bus> on pcib0 Feb 3 11:15:40 intake /kernel: pcib1: <PCI to PCI bridge (vendor=1106 device=8305)> at device 1.0 on pci0 Feb 3 11:15:40 intake /kernel: pci1: <PCI bus> on pcib1 Feb 3 11:15:40 intake /kernel: pci1: <NVidia Riva Vanta TNT2 graphics accelerator> at 0.0 irq 3 Feb 3 11:15:40 intake /kernel: pci0: <unknown card> (vendor=0x134d, dev=0x7897) at 4.0 irq 10 Feb 3 11:15:40 intake /kernel: rl0: <Accton MPX 5030/5038 10/100BaseTX> port 0x1000-0x10ff mem 0x41000000-0x410000ff irq 5 at device 5.0 on pci0 Feb 3 11:15:40 intake /kernel: rl0: Ethernet address: 00:10:b5:84:43:80 Feb 3 11:15:40 intake /kernel: miibus0: <MII bus> on rl0 Feb 3 11:15:40 intake /kernel: rlphy0: <RealTek internal media interface> on miibus0 Feb 3 11:15:40 intake /kernel: rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto Feb 3 11:15:40 intake /kernel: isab0: <VIA 82C686 PCI-ISA bridge> at device 20.0 on pci0 Feb 3 11:15:40 intake /kernel: isa0: <ISA bus> on isab0 Feb 3 11:15:40 intake /kernel: atapci0: <VIA 82C686 ATA66 controller> port 0x1880-0x188f at device 20.1 on pci0 Feb 3 11:15:40 intake /kernel: ata0: at 0x1f0 irq 14 on atapci0 Feb 3 11:15:40 intake /kernel: ata1: at 0x170 irq 15 on atapci0 Feb 3 11:15:40 intake /kernel: uhci0: <VIA 83C572 USB controller> port 0x1840-0x185f irq 11 at device 20.2 on pci0 Feb 3 11:15:40 intake /kernel: usb0: <VIA 83C572 USB controller> on uhci0 Feb 3 11:15:40 intake /kernel: usb0: USB revision 1.0 Feb 3 11:15:40 intake /kernel: uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 Feb 3 11:15:40 intake /kernel: uhub0: 2 ports with 2 removable, self powered Feb 3 11:15:40 intake /kernel: uhci1: <VIA 83C572 USB controller> port 0x1860-0x187f irq 11 at device 20.3 on pci0 Feb 3 11:15:40 intake /kernel: usb1: <VIA 83C572 USB controller> on uhci1 Feb 3 11:15:40 intake /kernel: usb1: USB revision 1.0 Feb 3 11:15:40 intake /kernel: uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 Feb 3 11:15:40 intake /kernel: uhub1: 2 ports with 2 removable, self powered Feb 3 11:15:40 intake /kernel: chip1: <VIA 82C686 ACPI interface> at device 20.4 on pci0 Feb 3 11:15:40 intake /kernel: pcm0: <VIA VT82C686A AC'97 Audio> port 0x1894-0x1897,0x1890-0x1893,0x1400-0x14ff irq 10 at device 20.5 on pci0 Feb 3 11:15:40 intake /kernel: fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 Feb 3 11:15:40 intake /kernel: fdc0: FIFO enabled, 8 bytes threshold Feb 3 11:15:40 intake /kernel: fd0: <1440-KB 3.5" drive> on fdc0 drive 0 Feb 3 11:15:40 intake /kernel: atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 Feb 3 11:15:40 intake /kernel: atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 Feb 3 11:15:40 intake /kernel: kbd0 at atkbd0 Feb 3 11:15:40 intake /kernel: psm0: <PS/2 Mouse> irq 12 on atkbdc0 Feb 3 11:15:40 intake /kernel: psm0: model IntelliMouse, device ID 3 Feb 3 11:15:40 intake /kernel: vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Feb 3 11:15:40 intake /kernel: sc0: <System console> at flags 0x100 on isa0 Feb 3 11:15:40 intake /kernel: sc0: VGA <16 virtual consoles, flags=0x300> Feb 3 11:15:40 intake /kernel: sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 Feb 3 11:15:40 intake /kernel: sio0: type 16550A Feb 3 11:15:40 intake /kernel: sio1: configured irq 3 not in bitmap of probed irqs 0 Feb 3 11:15:40 intake /kernel: ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 Feb 3 11:15:40 intake /kernel: ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode Feb 3 11:15:40 intake /kernel: ppc0: FIFO with 16/16/8 bytes threshold Feb 3 11:15:40 intake /kernel: ppbus0: IEEE1284 device found /NIBBLE Feb 3 11:15:40 intake /kernel: Probing for PnP devices on ppbus0: Feb 3 11:15:40 intake /kernel: ppbus0: <Hewlett-Packard HP LaserJet 6L/0101.01> PRINTER HP ENHANCED PCL5,PJL Feb 3 11:15:40 intake /kernel: plip0: <PLIP network interface> on ppbus0 Feb 3 11:15:40 intake /kernel: lpt0: <Printer> on ppbus0 Feb 3 11:15:40 intake /kernel: lpt0: Interrupt-driven port Feb 3 11:15:40 intake /kernel: ppi0: <Parallel I/O> on ppbus0 Feb 3 11:15:40 intake /kernel: ad0: 38166MB <Maxtor 34098H4> [77545/16/63] at ata0-master UDMA66 Feb 3 11:15:40 intake /kernel: acd0: DVD-ROM <Compaq DVD-ROM DV-5700B> at ata1-master using PIO4 Feb 3 11:15:40 intake /kernel: acd1: CD-RW <CDD4801 CD-R/RW> at ata1-slave using PIO4 Feb 3 11:15:40 intake /kernel: Mounting root from ufs:/dev/ad0s2a -- ================================================================= Beech Rintoul - Network Administrator - akbeech@anchoragerescue.org Anchorage Gospel Rescue Mission P.O. Box 230510 Anchorage, AK 99523-0510 Running On FreeBSD 4.2-STABLE ================================================================= To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?01020312111900.12123>