Date: Mon, 06 Jun 2011 11:06:25 -0400 From: Mike Tancsa <mike@sentex.net> To: Karl Pielorz <kpielorz_lst@tdx.co.uk> Cc: freebsd-usb@freebsd.org Subject: Re: Mapping ugen devices to corresponding /dev/cuaUx ? Message-ID: <4DECECF1.9010801@sentex.net> In-Reply-To: <A908B12E6F22CAE29BA5E7D3@HexaDeca64.dmpriest.net.uk> References: <A908B12E6F22CAE29BA5E7D3@HexaDeca64.dmpriest.net.uk>
next in thread | previous in thread | raw e-mail | index | archive | help
On 6/6/2011 10:40 AM, Karl Pielorz wrote: > > Is there any way of knowing which ugen devices map to which devices in > /dev? (The system has cuaU0 through cuaU8). Hi, RELENG_8 has a bit more info. Not sure when the change was in, but in sysctl, I see things like 0(ich10)# usbconfig | grep -i ftd ugen1.2: <usb serial converter ftdi> at usbus1, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON ugen2.2: <usb serial converter ftdi> at usbus2, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON ugen2.3: <usb serial converter ftdi> at usbus2, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON 0(ich10)# sysctl -a dev.uftdi dev.uftdi.0.%desc: usb serial converter dev.uftdi.0.%driver: uftdi dev.uftdi.0.%location: bus=1 hubaddr=1 port=1 devaddr=2 interface=0 dev.uftdi.0.%pnpinfo: vendor=0x0403 product=0x6001 devclass=0x00 devsubclass=0x00 sernum="ftEG4Z0V" release=0x0400 intclass=0xff intsubclass=0xff ttyname=U0 ttyports=1 dev.uftdi.0.%parent: uhub1 dev.uftdi.1.%desc: usb serial converter dev.uftdi.1.%driver: uftdi dev.uftdi.1.%location: bus=1 hubaddr=1 port=2 devaddr=2 interface=0 dev.uftdi.1.%pnpinfo: vendor=0x0403 product=0x6001 devclass=0x00 devsubclass=0x00 sernum="ftEG3NR6" release=0x0400 intclass=0xff intsubclass=0xff ttyname=U1 ttyports=1 dev.uftdi.1.%parent: uhub2 dev.uftdi.2.%desc: usb serial converter dev.uftdi.2.%driver: uftdi dev.uftdi.2.%location: bus=1 hubaddr=2 port=2 devaddr=3 interface=0 dev.uftdi.2.%pnpinfo: vendor=0x0403 product=0x6001 devclass=0x00 devsubclass=0x00 sernum="ftEGY0XE" release=0x0400 intclass=0xff intsubclass=0xff ttyname=U2 ttyports=1 dev.uftdi.2.%parent: uhub2 0(ich10)# Same with umodem and u3g # usbconfig ugen0.1: <OHCI root HUB AMD> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=SAVE ugen1.1: <EHCI root HUB AMD> at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE ugen1.2: <USB Modem U.S.Robotics> at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON ugen0.2: <Globetrotter HSDPA Modem Option N.V.> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON # sysctl -a dev. | grep tty dev.umodem.0.%pnpinfo: vendor=0x0baf product=0x0303 devclass=0x02 devsubclass=0x00 sernum="0000002" release=0x0200 intclass=0x02 intsubclass=0x02 ttyname=U0 ttyports=1 dev.u3g.0.%pnpinfo: vendor=0x0af0 product=0x6901 devclass=0xff devsubclass=0xff sernum="Serial Number" release=0x0000 intclass=0xff intsubclass=0xff ttyname=U1 ttyports=3 -- ------------------- Mike Tancsa, tel +1 519 651 3400 Sentex Communications, mike@sentex.net Providing Internet services since 1994 www.sentex.net Cambridge, Ontario Canada http://www.tancsa.com/
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4DECECF1.9010801>