Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 11 Sep 2002 11:49:55 -0700
From:      "Yau Keung Hom" <homyk@nosc.mil>
To:        David =?iso-8859-1?Q?Sieb=F6rger?= <drs@rucus.ru.ac.za>
Cc:        freebsd-hardware@FreeBSD.ORG
Subject:   Re: NIC on Compaq EV0 510R
Message-ID:  <3D7F9053.FA5A03F9@spawar.navy.mil>
References:  <4.2.0.58.20020911104437.01f2b330@mailsd1.spawar.navy.mil> <3D7EB097.8FBE8E41@spawar.navy.mil> <3D7EB097.8FBE8E41@spawar.navy.mil> <4.2.0.58.20020911104437.01f2b330@mailsd1.spawar.navy.mil> <4.2.0.58.20020911123431.01f2bce0@mailsd1.spawar.navy.mil> <20020911184646.GA1486@rucus.ru.ac.za>

next in thread | previous in thread | raw e-mail | index | archive | help
Thanks (also to Anselm Garbe).

That was it.  I had a IPFW entry before but it must have gotten overwritten as I
tried different OS versions.

This looks like its done it.  Thank you all for the help.


Yau Keung

David Siebörger wrote:

> On Wed 2002-09-11 (12:41), Yau Keung Hom wrote:
> > Adding 103B got the kernel to recognize the board.  Everything comes up,
> > but the interface isn't working.  Pinging from it has the error:
> >
> > ping: sendto: Permission denied
>
> That's usually caused by a firewall.  Have you perhaps built ipfw
> into your kernel with the default-to-deny setting?  Run "ipfw show"
> to check.  Or check ipfstat if you use ipf.
>
> > ifconfig seems happy, and the interface responds to arp (other hosts on the
> > net have an arp entry for this board), but it doesn't respond to ping, nor
> > can I send from it.  Any ideas on this?  I've seen the sendto error before
> > (on other NIC cards) when the interface was in the wrong media, but I'm not
> > sure what is causing this one.
>
> I've never seen that happen before.
>
> > Incidently, what PCI device number does your 82562 NIC use?
>
> 0x2449.
>
> fxp0@pci1:8:0:  class=0x020000 card=0x30138086 chip=0x24498086 rev=0x03 hdr=0x00
>
> --
> David Siebörger
> drs@rucus.ru.ac.za


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-hardware" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3D7F9053.FA5A03F9>