Skip site navigation (1)Skip section navigation (2)
Date:      Sat, 17 Oct 1998 20:37:09 -0600 (MDT)
From:      "Kenneth D. Merry" <ken@plutotech.com>
To:        mike@smith.net.au (Mike Smith)
Cc:        mrcpu@internetcds.com, hackers@FreeBSD.ORG, stable@FreeBSD.ORG
Subject:   Re: Annoying >2.2.5 oddity on reboot.
Message-ID:  <199810180237.UAA12379@panzer.plutotech.com>
In-Reply-To: <199810180144.SAA08806@dingo.cdrom.com> from Mike Smith at "Oct 17, 98 06:44:53 pm"

next in thread | previous in thread | raw e-mail | index | archive | help
Mike Smith wrote...
> > 
> > 
> > I have a bunch of DEC ZX and HX 6000 P6 boxes.  Have been running 2.2.5
> > for heap 'um big long time, zero troubles.
> > 
> > So I upgraded 2 of them to -stable as of yesterday.
                            ^^^^^^^^^^

> > Now neither of them will reboot properly.  They shutdown, and get to the
> > stage where they should start reloading, and they just hang.
> > 
> > I've tried a couple different BIOS revs, and nothing seems to help.
> > 
> > (These boxes have PCI and EISA slots).
> > 
> > Drop back to 2.2.5 kernel, and they reboot just fine.  
> > 
> > Anybody have any idea what may be wrong?  Driving down tot he office just
> > to finish off a shutdown -r is a big unusability factor.
> > 
> > The chipsets on the boxes are orion and neptune as I recall.
> > 
> > A veeeeery old 3.0 (august of last year I think) runs fine in SMP and
> > reboots properly.
> > 
> > Thanks for any tips.
> 
> If these are SCSI systems, and if the hang is about where the SCSI BIOS 
> should be loading from the disk, it may be that CAM is putting the SCSI 
                                                  ^^^

CAM is not in -stable.

> controllers into a state the BIOS doesn't know how to get them out of.  
> 
> If so, have you tried updating the SCSI controller BIOSsen as well?  
> Have you tried a 2.2.7-CAM kernel?  

That's a good thing to try.  There's a full release here:

ftp://ftp.FreeBSD.ORG/pub/FreeBSD/development/cam/...

Ken
-- 
Kenneth Merry
ken@plutotech.com

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199810180237.UAA12379>