Skip site navigation (1)Skip section navigation (2)
Date:      Sat, 5 Jun 2004 19:42:30 +0100
From:      "Liam J. Foy" <liamfoy@sepulcrum.org>
To:        "M. Warner Losh" <imp@bsdimp.com>
Cc:        sos@DeepCore.dk
Subject:   Re: Orinoco Gold and Linksys AP
Message-ID:  <20040605194230.21c9bb5c.liamfoy@sepulcrum.org>
In-Reply-To: <20040605.123728.58652129.imp@bsdimp.com>
References:  <20040604145717.37fd31ea.liamfoy@sepulcrum.org> <40C0DC2C.5050903@DeepCore.dk> <20040605.123728.58652129.imp@bsdimp.com>

next in thread | previous in thread | raw e-mail | index | archive | help
On Sat, 05 Jun 2004 12:37:28 -0600 (MDT)
"M. Warner Losh" <imp@bsdimp.com> wrote:

> In message: <40C0DC2C.5050903@DeepCore.dk>
>             S=F8ren Schmidt <sos@DeepCore.dk> writes:
> : Liam J. Foy wrote:
> : > Hey guys,
> : >=20
> : > 	I have also emailed this to freebsd-mobile@, so just writing to see =
if any of you guys have had any problems with an Orinoco Gold and a Linksys=
 AP in -CURRENT. They seem to both work fine in windows, just unable to pin=
g each other in freebsd. Here is the output of ifconfig wi0:
> : >=20
> : > wi0: flags=3D8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
> : > 	inet6 fe80::202:2dff:fec0:2a58%wi0 prefixlen 64 scopeid 0x5=20
> : > 	inet 192.168.0.20 netmask 0xffffff00 broadcast 255.255.255.0
> : > 	ether 00:02:2d:c0:2a:58
> : > 	media: IEEE 802.11 Wireless Ethernet autoselect (DS/11Mbps)
> : > 	status: associated
> : > 	ssid Anduril 1:Anduril
> : > 	stationname "FreeBSD WaveLAN/IEEE node"
> : > 	channel 3 authmode OPEN powersavemode OFF powersavesleep 100
> : > 	rtsthreshold 2312 protmode CTS
> : > 	wepmode OFF weptxkey 1
> : >=20
> : > The AP has WEP disabled, and whos SSID is Anduril. SSID Broadcast is =
disabled also on the AP.
> : >=20
> : > Any hints or ideas are greatly thanked,
> :=20
> : My orinoco's hasn't worked since the if_wi driver was redone over a yea=
r=20
> : ago (yeah time flies. You might have better luck with if_owi though, bu=
t=20
> : it didn't help mine either.
Is your card an Orinoco Classic Gold?
>=20
> What firmware level do you have?  Both wi and owi works for all my
> lucent/wavelan/orinoco cards. :-(
>=20
Hi Warner,

I have managed to get mine working. netstat -rn showed my problem, I was ro=
uting to the same point on two up interfaces. Disabling the one I dont used=
 fixed it. Thanks for replying !
> Warner
--=20
-Liam Foy
http://liamfoy.kerneled.org
"Do only what only you can do."



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20040605194230.21c9bb5c.liamfoy>