Date: Fri, 26 Jan 2007 01:47:28 +0300 From: Wishmaster <wishmaster@velnet.ru> To: freebsd-net@freebsd.org Subject: Re[2]: reproducible watchdog timeout in bge Message-ID: <1582899958.20070126014728@velnet.ru> In-Reply-To: <45B4BE90.20602@qwirky.net> References: <1458229821.20070120234257@velnet.ru> <45B28F37.7040100@delphij.net> <1651695163.20070122010957@velnet.ru> <be0088ce0701220431tf96827et3713885fac8a490a@mail.gmail.com> <45B4BE90.20602@qwirky.net>
next in thread | previous in thread | raw e-mail | index | archive | help
Hello Jeff, Monday, January 22, 2007, 4:39:28 PM, you wrote: JR> I have been unable to produce time outs with my current setup in JR> 6.2-Release. JR> bge0@pci3:0:0: class=0x020000 card=0x81491043 chip=0x165914e4 rev=0x11 JR> hdr=0x00 JR> vendor = 'Broadcom Corporation' JR> device = 'BCM5750A1 NetXtreme Gigabit Ethernet PCI Express' JR> class = network JR> subclass = ethernet JR> Reading the PR, I attempted triggering this through CVSing and through JR> the above mentioned ping tests. JR> So far nothing. JR> The only issue I have seen using these NICs in 6.2R is if I nail up the JR> NIC at 100baseTX full-duplex I sometimes loose connectivity. Nothing JR> in the logs indicate watchdog timeouts or any other issue. I simply JR> brought the NIC back down to auto-neg and all seems fine. I am JR> assuming this is a incompatibility between the BGE and my switch, RS8000. JR> I have a Asus P5MT-S with dual BGE NIC's JR> Cheers, JR> Jeff JR> _______________________________________________ JR> freebsd-net@freebsd.org mailing list JR> http://lists.freebsd.org/mailman/listinfo/freebsd-net JR> To unsubscribe, send any mail to JR> "freebsd-net-unsubscribe@freebsd.org" pciconf says: bge0@pci3:0:0: class=0x020000 card=0x81491043 chip=0x165914e4 rev=0x21 hdr=0x00 vendor = 'Broadcom Corporation' device = 'BCM5750A1 NetXtreme Gigabit Ethernet PCI Express' class = network subclass = ethernet bge1@pci4:0:0: class=0x020000 card=0x81491043 chip=0x165914e4 rev=0x21 hdr=0x00 vendor = 'Broadcom Corporation' device = 'BCM5750A1 NetXtreme Gigabit Ethernet PCI Express' class = network subclass = ethernet So, if you have no troubles can you tell do you have smp kernel with apic and what distribution you are using? On my configuration I have dual core intel xeon 30xx series with SMP and APIC kernel (i386 distribution). This issue appears just after system boots up. If you have non-smp kernel can you try to recompile it with smp and apic support? p.s. motherboard asus p5m2/2gbl -- Best regards, Wishmaster mailto:wishmaster-velnet@yandex.ru
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1582899958.20070126014728>