Date: Tue, 03 May 2005 16:54:10 +0100 From: Pete French <petefrench@ticketswitch.com> To: freebsd-stable@freebsd.org Subject: RC4 will not install using FTP Message-ID: <E1DSzis-000HlG-Pi@dilbert.firstcallgroup.co.uk>
next in thread | raw e-mail | index | archive | help
Just been trying to install a new machine with 5.4-RC4. I normally do this using the bootonly image and FTP. But doing an FTP install always gives me the error "/: write failed, filesystem full" when it fetches the first chunk and tries to write it out. I get exactly the same problem doing an FTP install from the full disc1.iso, so it isnt a problem wiuth the boootonly iso image. Installing from the full CD works fine, however. Included below is the dmesg in case my hardware has something to dow ith this. -pcf. Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.4-RC4 #0: Mon May 2 00:08:36 UTC 2005 root@harlow.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC ACPI APIC Table: <DELL WS 450 > Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Xeon(TM) CPU 2.40GHz (2392.04-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf29 Stepping = 9 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Hyperthreading: 2 logical CPUs real memory = 536301568 (511 MB) avail memory = 515141632 (491 MB) ioapic0: Changing APIC ID to 8 ioapic1: Changing APIC ID to 9 ioapic2: Changing APIC ID to 10 ioapic0 <Version 2.0> irqs 0-23 on motherboard ioapic1 <Version 2.0> irqs 24-47 on motherboard ioapic2 <Version 2.0> irqs 48-71 on motherboard npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <DELL WS 450 > on motherboard acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 cpu0: <ACPI CPU> on acpi0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <PCI-PCI bridge> mem 0xee000000-0xefffffff at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pcib2: <ACPI PCI-PCI bridge> at device 2.0 on pci0 pci2: <ACPI PCI bus> on pcib2 pci2: <base peripheral, interrupt controller> at device 28.0 (no driver attached) pcib3: <ACPI PCI-PCI bridge> at device 29.0 on pci2 pci3: <ACPI PCI bus> on pcib3 mpt0: <LSILogic 1030 Ultra4 Adapter> port 0xec00-0xecff mem 0xfe3c0000-0xfe3dffff,0xfe3e0000-0xfe3fffff irq 25 at device 12.0 on pci3 mpt1: <LSILogic 1030 Ultra4 Adapter> port 0xe800-0xe8ff mem 0xfe380000-0xfe39ffff,0xfe3a0000-0xfe3bffff irq 26 at device 12.1 on pci3 em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35> port 0xe4c0-0xe4ff mem 0xfe360000-0xfe37ffff irq 24 at device 14.0 on pci3 em0: Ethernet address: 00:0b:db:c6:06:68 em0: Speed:N/A Duplex:N/A pci2: <base peripheral, interrupt controller> at device 30.0 (no driver attached) pcib4: <ACPI PCI-PCI bridge> at device 31.0 on pci2 pci4: <ACPI PCI bus> on pcib4 uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0xff80-0xff9f irq 16 at device 29.0 on pci0 usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0xff60-0xff7f irq 19 at device 29.1 on pci0 usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0xff40-0xff5f irq 18 at device 29.2 on pci0 usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered pci0: <serial bus, USB> at device 29.7 (no driver attached) pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci5: <ACPI PCI bus> on pcib5 pcib6: <PCI-PCI bridge> at device 13.0 on pci5 pci6: <PCI bus> on pcib6 pci6: <display, VGA> at device 0.0 (no driver attached) pci6: <display> at device 4.0 (no driver attached) pci6: <display> at device 8.0 (no driver attached) pci6: <display> at device 12.0 (no driver attached) isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH4 UDMA100 controller> port 0xffa0-0xffaf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0 ata0: channel #0 on atapci0 ata1: channel #1 on atapci0 pci0: <serial bus, SMBus> at device 31.3 (no driver attached) pci0: <multimedia, audio> at device 31.5 (no driver attached) fdc0: <floppy drive controller> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0 fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A ppc0: <ECP parallel printer port> port 0x778-0x77f,0x378-0x37f irq 7 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 orm0: <ISA Option ROMs> at iomem 0xce000-0xcffff,0xcc800-0xcdfff,0xc8800-0xcc7ff,0xc0000-0xc87ff on isa0 pmtimer0 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounter "TSC" frequency 2392044020 Hz quality 800 Timecounters tick every 10.000 msec acd0: CDRW <SONY CD-RW CRX216E/PD01> at ata1-master PIO4 Waiting 15 seconds for SCSI devices to settle da0 at mpt1 bus 0 target 0 lun 0 da0: <FUJITSU MAP3367NP 5608> Fixed Direct Access SCSI-3 device da0: 320.000MB/s transfers (160.000MHz, offset 127, 16bit), Tagged Queueing Enabled da0: 34732MB (71132959 512 byte sectors: 255H 63S/T 4427C) Mounting root from ufs:/dev/da0s2a em0: Link is up 100 Mbps Full Duplex
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?E1DSzis-000HlG-Pi>