Date: Wed, 14 Apr 1999 10:39:23 -0800 From: al7oj@customcpu.com To: multimedia@FreeBSD.ORG Subject: No audio with FreeBSD3.0-R Message-ID: <19990414184530214.AAA204@anch01.customcpu.com@mail.customcpu.com>
next in thread | raw e-mail | index | archive | help
I have been trying for some time to get audio working. I provide the info
below. I followed the directions in (4)pcm to the letter, but looking at
ls-l /dev/audio*, it looks like the links are backwards. I did all the 'rm
... audio...' again, and the links came back the same. Anyway, no .wav or
.au sound nor does xcd work. Any ideas? Thanks,
Mike
------------------------------------------------------------------------
FROM ls -l /dev/audio*
lrwxrwxrwx 1 root wheel 6 Apr 10 19:43 /dev/audio -> audio1
crw-rw-rw- 1 root wheel 30, 20 Apr 10 19:43 /dev/audio1
FROM CAT /DEV/SNDSTAT:
FreeBSD Audio Driver (981002) Apr 10 1999 12:43:55
Installed devices:
pcm1: <CS4237> at 0x530 irq 5 dma 1:3
FROM MYKERNEL:
device pcm0 at isa? port ? tty irq 5 drq 1 flags 0x0 vector pcmintr
FROM DMESG:
Copyright (c) 1992-1998 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved. FreeBSD
3.0-RELEASE #5: Sat Apr 10 12:47:10 AKDT 1999
root@FreeBSDrulz:/usr/src/sys/compile/MYKERNEL
Timecounter "i8254" frequency 1193182 Hz cost 1450 ns
Timecounter "TSC" frequency 233288309 Hz cost 94 ns
CPU: AMD-K6tm w/ multimedia extensions (233.29-MHz 586-class CPU)
Origin = "AuthenticAMD" Id = 0x562 Stepping=2
Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
real memory = 67108864 (65536K bytes)
FreeBSD Kernel Configuration Utility - Version 1.1
Type "help" for help or "visual" to go to the visual
configuration interface (requires MGA/VGA display or
serial terminal capable of displaying ANSI graphics).
config> ls
Device port irq drq iomem iosize unit flags enab
confl fdc0 0x3f0 6 2 0 0 0 0
Yes No wdc0 0x1f0 14 -1 0 0 0 0
Yes No wdc1 0x170 15 -1 0 0 1 0
Yes No pcm0 0xffffffff 5 1 0 0 0 0
Yes No pca0 0x40 -1 -1 0 0 0 0
Yes No sc0 0x60 1 -1 0 0 0 0
Yes Yes sio0 0x3f8 4 -1 0 0 0 0x10
Yes No sio1 0x2f8 3 -1 0 0 1 0
Yes No sio2 0x3e8 5 -1 0 0 2 0
No No sio3 0x2e8 9 -1 0 0 3 0
No No lpt0 0xffffffff 7 -1 0 0 0 0
Yes No psm0 0x60 12 -1 0 0 0 0
Yes Yes npx0 0xf0 13 -1 0 0 0 0
Yes No
Number of EISA slots to probe: 10
config> pnp 1 0 os enable irq0 5 drq0 1 port0 0x534 port2 0x220 drq1 3
config> pnp 2 0 os enable irq0 4 port0 0x3F8
config> quit
avail memory = 63180800 (61700K bytes)
Probing for devices on PCI bus 0:
chip0: <Host to PCI bridge (vendor=10b9 device=1531)> rev 0xb2 on pci0.0.0
chip1: <PCI to ISA bridge (vendor=10b9 device=1533)> rev 0x07 on pci0.2.0
ide_pci0: <PCI IDE controller (busmaster capable)> rev 0x20 int a irq 255
on pci0.11.0 vga0: <S3 ViRGE DX/GX graphics accelerator> rev 0x01 int a
irq 9 on pci0.14.0 Probing for PnP devices:
CSN 1 Vendor ID: CSC8037 [0x3780630e] Serial 0xffffffff Comp ID: @@@0000
[0x00000000] mss_attach <CS4237>1 at 0x530 irq 5 dma 1:3 flags 0x13
pcm1 (CS423x/Yamaha <CS4237> sn 0xffffffff) at 0x530-0x537 irq 5 drq 1
flags 0x13 on isa CSN 2 Vendor ID: BDP3336 [0x36339008] Serial 0x0f8c5050
Comp ID: @@@0000 [0x00000000] Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <16 virtual consoles, flags=0x0>
pcm0 not probed due to drq conflict with pcm1 at 1
pca0 on motherboard
pca0: PC speaker audio driver
sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
lpt0 at 0x378-0x37f irq 7 on isa
lpt0: Interrupt-driven port
lp0: TCP/IP capable interface
psm0 at 0x60-0x64 irq 12 on motherboard
psm0: model Generic PS/2 mouse, device ID 0
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
wdc0 at 0x1f0-0x1f7 irq 14 on isa
wdc0: unit 0 (wd0): <Maxtor 83240D3>
wd0: 3090MB (6328665 sectors), 6697 cyls, 15 heads, 63 S/T, 512 B/S wdc0:
unit 1 (wd1): <SAMSUNG SW0434A (4.3GB)>
wd1: 4104MB (8406720 sectors), 8896 cyls, 15 heads, 63 S/T, 512 B/S wdc1
at 0x170-0x177 irq 15 on isa
wdc1: unit 1 (atapi): <CD-ROM 24X/AKOx/17B>, removable, intr, dma, iordy
wcd0: 4125Kb/sec, 120Kb cache, audio play, 255 volume levels, ejectable
tray wcd0: no disc inside, unlocked
npx0 on motherboard
npx0: INT 16 interface
changing root device to wd1s3a
pid 272 (kscd), uid 1001: exited on signal 11 (core dumped)
pid 278 (kscd), uid 1001: exited on signal 11 (core dumped)
pid 311 (kscd), uid 0: exited on signal 11 (core dumped)
pid 325 (kscd), uid 0: exited on signal 11 (core dumped)
-----------------------------------------------------------
Using OS/2 Warp4 & MR2ICE (20601)
I use FreeBSD (3.0), Debian Linux (2.0), OS/2 Warp 3&4, and Amiga!
-----------------------------------------------------------
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-multimedia" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?19990414184530214.AAA204>