Date: Sat, 18 Jun 2011 12:53:28 +0200 From: Stefan Bethke <stb@lassitu.de> To: freebsd-virtualization@freebsd.org Subject: VIMAGE and pf? Message-ID: <0A8B9BF3-8401-4541-9FBD-0C292149C5E4@lassitu.de>
next in thread | raw e-mail | index | archive | help
Is VIMAGE supposed to be compatible with pf? On r223207 (8-stable) I'm getting a panic when pfctl loads the rules: Fatal trap 12: page fault while in kernel mode cpuid = 1; apic id = 01 fault virtual address = 0x28 fault code = supervisor read data, page not present instruction pointer = 0x20:0xffffffff803da27a stack pointer = 0x28:0xffffff811ef8b7d0 frame pointer = 0x28:0xffffff811ef8b7f0 code segment = base 0x0, limit 0xfffff, type 0x1b = DPL 0, pres 1, long 1, def32 0, gran 1 processor eflags = interrupt enabled, resume, IOPL = 0 current process = 839 (pfctl) trap number = 12 panic: page fault cpuid = 1 KDB: stack backtrace: db_trace_self_wrapper() at db_trace_self_wrapper+0x2a kdb_backtrace() at kdb_backtrace+0x37 panic() at panic+0x187 trap_fatal() at trap_fatal+0x290 trap_pfault() at trap_pfault+0x28f trap() at trap+0x3df calltrap() at calltrap+0x8 --- trap 0xc, rip = 0xffffffff803da27a, rsp = 0xffffff811f03f7d0, rbp = 0xffffff811f03f7f0 --- ifunit() at ifunit+0x2a pfioctl() at pfioctl+0x1c2a devfs_ioctl_f() at devfs_ioctl_f+0x7b kern_ioctl() at kern_ioctl+0x102 ioctl() at ioctl+0xfd syscallenter() at syscallenter+0x1e5 syscall() at syscall+0x4b Xfast_syscall() at Xfast_syscall+0xe2 --- syscall (54, FreeBSD ELF64, ioctl), rip = 0x80099a8ac, rsp = 0x7fffffffb568, rbp = 0x7fffffffb6c0 --- (The above is likely mangled due to my console server missing a few characters now and then.) I've got these interfaces configured: em0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=219b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4,WOL_MAGIC> ether 00:1c:c0:7d:8c:50 inet6 fe80::21c:c0ff:fe7d:8c50%em0 prefixlen 64 scopeid 0x1 nd6 options=3<PERFORMNUD,ACCEPT_RTADV> media: Ethernet autoselect (1000baseT <full-duplex>) status: active pflog0: flags=0<> metric 0 mtu 33152 lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384 options=3<RXCSUM,TXCSUM> inet 127.0.0.1 netmask 0xff000000 inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0xb nd6 options=3<PERFORMNUD,ACCEPT_RTADV> bridge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 ether 02:00:00:00:00:01 inet 44.128.65.1 netmask 0xffffffc0 broadcast 44.128.65.63 inet6 fe80::21c:c0ff:fe7d:8c50%bridge0 prefixlen 64 scopeid 0xc inet6 2001:470:1f0b:1064::1 prefixlen 64 nd6 options=3<PERFORMNUD,ACCEPT_RTADV> id 00:00:00:00:00:00 priority 32768 hellotime 2 fwddelay 15 maxage 20 holdcnt 6 proto rstp maxaddr 100 timeout 1200 root id 00:00:00:00:00:00 priority 32768 ifcost 0 port 0 member: vlan1 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP> ifmaxaddr 0 port 14 priority 128 path cost 55 member: tap0 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP> ifmaxaddr 0 port 13 priority 128 path cost 2000000 tap0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=80000<LINKSTATE> ether 00:bd:c5:5a:01:00 inet6 fe80::2bd:c5ff:fe5a:100%tap0 prefixlen 64 scopeid 0xd nd6 options=3<PERFORMNUD,ACCEPT_RTADV> Opened by PID 2524 vlan1: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=3<RXCSUM,TXCSUM> ether 00:1c:c0:7d:8c:50 inet6 fe80::21c:c0ff:fe7d:8c50%vlan1 prefixlen 64 scopeid 0xe nd6 options=3<PERFORMNUD,ACCEPT_RTADV> media: Ethernet autoselect (1000baseT <full-duplex>) status: active vlan: 1 parent interface: em0 vlan2: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=3<RXCSUM,TXCSUM> ether 00:1c:c0:7d:8c:50 inet 44.128.65.249 netmask 0xfffffff8 broadcast 44.128.65.255 inet6 fe80::21c:c0ff:fe7d:8c50%vlan2 prefixlen 64 scopeid 0xf nd6 options=3<PERFORMNUD,ACCEPT_RTADV> media: Ethernet autoselect (1000baseT <full-duplex>) status: active vlan: 2 parent interface: em0 vlan3: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=3<RXCSUM,TXCSUM> ether 00:1c:c0:7d:8c:50 inet 172.23.54.1 netmask 0xffffff00 broadcast 172.23.54.255 inet6 fe80::21c:c0ff:fe7d:8c50%vlan3 prefixlen 64 scopeid 0x10 nd6 options=3<PERFORMNUD,ACCEPT_RTADV> media: Ethernet autoselect (1000baseT <full-duplex>) status: active vlan: 3 parent interface: em0 vlan4: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=3<RXCSUM,TXCSUM> ether 00:1c:c0:7d:8c:50 inet6 fe80::21c:c0ff:fe7d:8c50%vlan4 prefixlen 64 scopeid 0x11 inet 31.18.32.155 netmask 0xfffff800 broadcast 31.18.39.255 nd6 options=3<PERFORMNUD,ACCEPT_RTADV> media: Ethernet autoselect (1000baseT <full-duplex>) status: active vlan: 4 parent interface: em0 gif0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> metric 0 mtu 1280 tunnel inet 31.18.32.155 --> 216.66.80.30 inet6 fe80::21c:c0ff:fe7d:8c50%gif0 prefixlen 64 scopeid 0x12 inet6 2001:470:1f0a:1064::2 --> 2001:470:1f0a:1064::1 prefixlen 128 nd6 options=3<PERFORMNUD,ACCEPT_RTADV> options=1<ACCEPT_REV_ETHIP_VER> tun1: flags=8043<UP,BROADCAST,RUNNING,MULTICAST> metric 0 mtu 1500 options=80000<LINKSTATE> inet6 fe80::21c:c0ff:fe7d:8c50%tun1 prefixlen 64 scopeid 0x13 inet 44.128.127.2 netmask 0xffffff00 broadcast 44.128.127.255 nd6 options=3<PERFORMNUD,ACCEPT_RTADV> Opened by PID 2516 -- Stefan Bethke <stb@lassitu.de> Fon +49 151 14070811
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?0A8B9BF3-8401-4541-9FBD-0C292149C5E4>