Date: Tue, 16 Nov 2004 21:07:52 +0100 From: Willem Jan Withagen <wjw@withagen.nl> To: freebsd-stable@freebsd.org Subject: Questions about a 5.2.1 crash..... Message-ID: <419A5E18.5050806@withagen.nl>
next in thread | raw e-mail | index | archive | help
Hi,
I've been asked to help this former customer.
This box is running 5.2.1 with as most "exotic" application jave/tomcat. And
it crashes too often. The first essential question for the customer is: Is
this hardware??? So I did the 'make -j 8 buildworld' test, which it survived
with flying colors.
What do I find in the logs:
Nov 12 11:22:01 ktc syslogd: kernel boot file is /boot/kernel/kernel
Nov 12 11:22:01 ktc kernel: panic: vm_fault: fault on nofault entry, addr:
ee8fd000
Nov 12 11:22:01 ktc kernel:
Nov 12 11:22:01 ktc kernel: syncing disks, buffers remaining... panic:
bremfree: removing a buffer not on a queue
Nov 12 11:22:01 ktc kernel: Uptime: 2d11h12m6s
Nov 12 11:22:01 ktc kernel: Shutting down ACPI
Nov 12 11:22:01 ktc kernel: Automatic reboot in 15 seconds - press a key on
the console to abort
......
Nov 12 11:22:02 ktc kernel: WARNING: / was not properly dismounted
Nov 12 11:53:54 ktc syslogd: kernel boot file is /boot/kernel/kernel
Nov 12 11:53:54 ktc kernel: panic: vm_fault: fault on nofault entry, addr:
ee79f000
Nov 12 11:53:54 ktc kernel:
Nov 12 11:53:54 ktc kernel: syncing disks, buffers remaining... panic:
bremfree: removing a buffer not on a queue
Nov 12 11:53:54 ktc kernel: Uptime: 31m36s
Nov 12 11:53:54 ktc kernel: Shutting down ACPI
Now the panic in the syncing part, I can imagine to just be there since
syncing disk after a panic has not really worked all that well in 5.x
Customer has disabled all warnings/witness/.....
And I can not make much of the comments on sys/vm/vm_fault.c:278, which is
where the fault on nofault occurs...
My feeling says: upgrade to 5.3, but this being a production server running
soem applications I know very little off holds me back.
So is this for sure a hardware problem, or just leftovers from 5.2.1????
--WjW
-------- Original Message --------
Date: Tue, 16 Nov 2004 20:57:26 +0100 (CET)
From: Jan Willem <wjw@ktc.netmaniacs.nl>
To: wjw@withagen.nl
3.78.225.127:138 193.78.225.255:138 in via fxp0
TPTE at 0xbfc203e4 IS ZERO @ VA 080f9000
panic: bad pte
syncing disks, buffers remaining... panic: bremfree: removing a buffer not on
a queue
Uptime: 6h59m22s
Shutting down ACPI
Automatic reboot in 15 seconds - press a key on the console to abort
Rebooting...
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.2.1-RELEASE-p9 #4: Tue Aug 24 01:16:22 CEST 2004
joao@ktc.netmaniacs.nl:/usr/src/sys/i386/compile/KTC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc09ee000.
Preloaded elf module "/boot/kernel/aout.ko" at 0xc09ee26c.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc09ee318.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 3.20GHz (3192.22-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf29 Stepping = 9
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Hyperthreading: 2 logical CPUs
real memory = 2129850368 (2031 MB)
avail memory = 2063503360 (1967 MB)
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <INTEL D865GLC > on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 12 entries at 0xc00f3d20
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_cpu1: <CPU> on acpi0
device_probe_and_attach: acpi_cpu1 attach returned 6
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib0: slot 2 INTA is routed to irq 11
pcib0: slot 29 INTA is routed to irq 11
pcib0: slot 29 INTB is routed to irq 5
pcib0: slot 29 INTC is routed to irq 10
pcib0: slot 29 INTA is routed to irq 11
pcib0: slot 29 INTD is routed to irq 9
pcib0: slot 31 INTA is routed to irq 10
pcib0: slot 31 INTB is routed to irq 3
agp0: <Intel 82865G (865G GMCH) SVGA controller> port 0xec00-0xec07 mem
0xffa80000-0xffafffff,0xf0000000-0xf7ffffff irq 11 at device 2.0 on pci0
agp0: detected 16252k stolen memory
agp0: aperture size is 128M
uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xc800-0xc81f irq 11
at device 29.0 on pci0
usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xcc00-0xcc1f irq 5 at
device 29.1 on pci0
usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xd000-0xd01f irq 10
at device 29.2 on pci0
usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port 0xd400-0xd41f irq 11
at device 29.3 on pci0
usb3: <Intel 82801EB (ICH5) USB controller USB-D> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 29.7 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib1: slot 0 INTA is routed to irq 10
pcib1: slot 1 INTA is routed to irq 10
pcib1: slot 8 INTA is routed to irq 11
pcib2: <PCI-PCI bridge> at device 0.0 on pci1
pci2: <PCI bus> on pcib2
asr0: <Adaptec Caching SCSI RAID> mem 0xe4000000-0xe5ffffff irq 10 at device
0.1 on pci1
asr0: major=154
asr0: ADAPTEC 2100S FW Rev. 370F, 1 channel, 256 CCBs, Protocol I2O
xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xbc00-0xbc7f mem
0xff8efc00-0xff8efc7f irq 10 at device 1.0 on pci1
xl0: Ethernet address: 00:04:76:f6:e1:1c
miibus0: <MII bus> on xl0
xlphy0: <3Com internal media interface> on miibus0
xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: <Intel 82801BA (D865) Pro/100 VE Ethernet> port 0xb800-0xb83f mem
0xff8ee000-0xff8eefff irq 11 at device 8.0 on pci1
fxp0: Ethernet address 00:0c:f1:91:52:7b
miibus1: <MII bus> on fxp0
inphy0: <i82562ET 10/100 media interface> on miibus1
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH5 UDMA100 controller> port
0xffa0-0xffaf,0-0x3,0-0x7,0-0x3,0-0x7 at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
atapci1: <Intel ICH5 SATA150 controller> port
0xd800-0xd80f,0xdc00-0xdc03,0xe000-0xe007,0xe400-0xe403,0xe800-0xe807 irq 10
at device 31.2 on pci0
atapci1: [MPSAFE]
ata2: at 0xe800 on atapci1
ata2: [MPSAFE]
ata3: at 0xe000 on atapci1
ata3: [MPSAFE]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Sleep Button> on acpi0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port
0x3f7,0x3f4-0x3f5,0x3f2-0x3f3,0x3f0-0x3f1 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
ppc0 port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
acpi_cpu1: <CPU> on acpi0
device_probe_and_attach: acpi_cpu1 attach returned 6
orm0: <Option ROMs> at iomem 0xca000-0xcffff,0xc0000-0xc9fff on isa0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 3192222428 Hz quality 800
Timecounters tick every 10.000 msec
ipfw2 initialized, divert enabled, rule-based forwarding enabled, default to
deny, logging unlimited
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
acd0: CDROM <LTN526S> at ata1-master PIO4
GEOM: create disk da0 dp=0xc869b050
da0 at asr0 bus 0 target 0 lun 0
da0: <ADAPTEC 1POINT-ADVISE 370F> Fixed Direct Access SCSI-2 device
da0: Tagged Queueing Enabled
da0: 70007MB (143374336 512 byte sectors: 255H 63S/T 8924C)
Mounting root from ufs:/dev/da0s1a
WARNING: / was not properly dismounted
WARNING: /usr was not properly dismounted
/usr: superblock summary recomputed
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?419A5E18.5050806>