Date: Mon, 21 May 2018 04:05:24 +0700 From: Eugene Grosbein <eugen@grosbein.net> To: Gary Palmer <gpalmer@freebsd.org>, freebsd-stable@freebsd.org Subject: Re: i386 nanobsd w/11.1-RELEASE-p10 Message-ID: <5B01E314.6020103@grosbein.net> In-Reply-To: <20180519134604.GD13355@in-addr.com> References: <20180519134604.GD13355@in-addr.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On 19.05.2018 20:46, Gary Palmer wrote:
>
> Hi,
>
> I haven't tried building an i386 image with nanobsd since 8.x or 9.x,
> so apologies if this is a known issue
>
> I've tried to build an i386 nanobsd using nanobsd on an amd64 host,
> and when that didn't work in an i386 jail on an amd64 host, and
> now in an i386 vm.
I routinely update my 11.1-STABLE/i386 home router running nanobsd
built using 11.1-STABLE/amd64 desktop. I do not use any of chroot/jail/vm to build it.
> The i386 vm is failing with the logs at the end of the message,
> taken from _.bw in the nanobsd build directory. I think similar
> errors were seen in the other environments also. A "make buildworld"
> in /usr/src passes, so it looks like something specific to nanobsd
> is tickling the problem.
>
> I included the first few lines from the start of boot2.s also.
>
> The nanobsd config file has been stripped down to remove any
> options that should affect the build
>
> == begin ==
> NANO_PMAKE="make -j 1"
> NANO_NAME=net5501-nopkg
> NANO_SRC=/usr/src
> NANO_OBJ=/mnt/space/obj/nanobsd.${NANO_NAME}
> NANO_KERNEL=NET5501
> NANO_IMAGES=2
> NANO_INIT_IMG2=0
> # The following are in 512 byte sectors. The "2" is to convert from
> # sectors to kilobytes
> NANO_CONFSIZE=48195 # 32 MB
> NANO_DATASIZE=1975932
> NANO_RAM_ETCSIZE=$(( 2 * 1024 * 64 )) # 64 MB
> NANO_RAM_TMPVARSIZE=$(( 2 * 1024 * 32 )) # 32 MB
>
> FlashDevice generic 2048m
> == end ==
Here is my gw.conf:
src=/home/nanobsd/gw
NANO_PMAKE="make -j9"
NANO_NAME=gw
NANO_KERNEL=GW
NANO_DRIVE=ada0
NANO_MEDIASIZE=2097152
NANO_SECTS=63
NANO_HEADS=255
NANO_BOOTLOADER="boot/boot0"
NANO_BOOT0CFG="-o packet -s 1 -m 3 -t 36"
# no NANO_DATASIZE but this should be irrelevant
NANO_RAM_ETCSIZE=16384 # 8MB
NANO_RAM_TMPVARSIZE=409600 # 200MB for large /var/spool
NANO_CUSTOMIZE="..."
NANO_LATE_CUSTOMIZE="..."
CONF_BUILD='
TARGET=i386
TARGET_ARCH=i386
NANO_ARCH=i386
CPUTYPE?=k6-3
BOOT_COMCONSOLE_SPEED=115200
BOOT_MBR_FLAGS=0x0
BOOT_BOOT1_FLAGS=0x0
# here come lots of WITHOUT_XXX
MODULES_OVERRIDE=ipfw_nat
'
CONF_INSTALL="
$CONF_BUILD
WITHOUT_BINUTILS=
WITHOUT_CLANG=
WITHOUT_CLANG_FULL=
WITHOUT_CXX=
WITHOUT_TOOLCHAIN=
WITHOUT_INSTALLLIB=
"
> No /etc/src.conf or /etc/make.conf present.
That's not good, see above for CONF_BUILD and CONF_INSTALL.
I've just run /usr/src/tools/tools/nanobsd/nanobsd.sh -c gw.conf
using my amd64 system and get images for i386.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?5B01E314.6020103>