Date: Mon, 21 Jul 2014 19:46:43 -0700 From: David Benfell <benfell@parts-unknown.org> To: freebsd-questions@freebsd.org Subject: All of a sudden, problems with X Message-ID: <20140722024643.GA29536@munich.parts-unknown.org>
next in thread | raw e-mail | index | archive | help
--y0ulUmNC+osPPQO6
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
Content-Transfer-Encoding: quoted-printable
Hi all,
I'm not sure, but I think my problem is with an update. But I'm not
sure what needs to be rolled back or even how to do it.
When I recently installed FreeBSD on this Asus X202e (no, I haven't
gotten it booting properly), X worked great if I used startx.
gdm had some weird problem where it wasn't displaying the screen
properly. But I could use startx with fluxbox and this was fine.
Now I've rebooted and I can't get Xorg working properly at all.
Xorg -configure yields only a black (apparently not blank) screen. I
tried adding the magic to allow CTRL/ALT/BACKSPACE but it doesn't
work (yes, I rebooted after adding the magic). The only way out of the
black screen is CTRL/ALT/DEL, which reboots the system.
If I use startx, I get a correct display, but the mouse doesn't work.
I actually have two of them. This is a notebook system, so one is the
touchpad and the second is a Kensington trackball.
My /var/run/dmesg.boot and /var/log/Xorg.0.log are below. I'm not sure
what to make of any of it, and I'm--ummm--rather handicapped trying to
figure anything out when I can't get X running to run a regular
browser:
Copyright (c) 1992-2014 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10.0-RELEASE-p7 #0: Tue Jul 8 06:37:44 UTC 2014
root@amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 3.3 (tags/RELEASE_33/final 183502) 20130610
module_register: module ti_mmchs/mmc already exists!
Module ti_mmchs/mmc failed to register: 17
module_register: module at91_mci/mmc already exists!
Module at91_mci/mmc failed to register: 17
module_register: module sdhci_pci/mmc already exists!
Module sdhci_pci/mmc failed to register: 17
module_register: module sdhci_bcm/mmc already exists!
Module sdhci_bcm/mmc failed to register: 17
module_register: module sdhci_fdt/mmc already exists!
Module sdhci_fdt/mmc failed to register: 17
module_register: module sdhci_ti/mmc already exists!
Module sdhci_ti/mmc failed to register: 17
module_register: module mmc/mmcsd already exists!
Module mmc/mmcsd failed to register: 17
CPU: Intel(R) Core(TM) i3-3217U CPU @ 1.80GHz (1795.96-MHz K8-class CPU)
Origin =3D "GenuineIntel" Id =3D 0x306a9 Family =3D 0x6 Model =3D 0x3a=
Stepping =3D 9
Features=3D0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PG=
E,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=3D0x3dbae3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3=
,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,XSAVE,OSXSAVE,AVX,F=
16C>
AMD Features=3D0x28100800<SYSCALL,NX,RDTSCP,LM>
AMD Features2=3D0x1<LAHF>
Standard Extended Features=3D0x281<GSFSBASE,SMEP,ENHMOVSB>
TSC: P-state invariant, performance statistics
real memory =3D 4294967296 (4096 MB)
avail memory =3D 3997605888 (3812 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <_ASUS_ Notebook>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 SMT threads
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
random: <Software, Yarrow> initialized
acpi0: <_ASUS_ Notebook> on motherboard
acpi_ec0: <Embedded Controller: GPE 0x19, ECDT> port 0x62,0x66 on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
Event timer "HPET4" frequency 14318180 Hz quality 440
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xf7800000-0xf7bff=
fff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0
agp0: <IvyBridge mobile GT2 IG> on vgapci0
agp0: aperture size is 256M, detected 65532k stolen memory
vgapci0: Boot video device
pci0: <dasp> at device 4.0 (no driver attached)
xhci0: <Intel Panther Point USB 3.0 controller> mem 0xf7e00000-0xf7e0ffff i=
rq 16 at device 20.0 on pci0
usbus0: waiting for BIOS to give up control
xhci0: 32 byte context size.
xhci0: Port routing mask set to 0xffffffff
usbus0 on xhci0
pci0: <simple comms> at device 22.0 (no driver attached)
ehci0: <Intel Panther Point USB 2.0 controller> mem 0xf7e20000-0xf7e203ff i=
rq 16 at device 26.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
hdac0: <Intel Panther Point HDA Controller> mem 0xf7e18000-0xf7e1bfff irq 2=
2 at device 27.0 on pci0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
pci2: <ACPI PCI bus> on pcib2
ath0: <Atheros AR9485> mem 0xf7d00000-0xf7d7ffff irq 17 at device 0.0 on pc=
i2
ar9300_set_stub_functions: setting stub functions
ar9300_set_stub_functions: setting stub functions
ar9300_attach: calling ar9300_hw_attach
ar9300_hw_attach: calling ar9300_eeprom_attach
ar9300_flash_map: unimplemented for now
Restoring Cal data from DRAM
Restoring Cal data from EEPROM
Restoring Cal data from Flash
Restoring Cal data from Flash
Restoring Cal data from OTP
ar9300_hw_attach: ar9300_eeprom_attach returned 0
ath0: RX status length: 48
ath0: RX buffer size: 4096
ath0: TX descriptor length: 128
ath0: TX status length: 36
ath0: TX buffers per descriptor: 4
ar9300_freebsd_setup_x_tx_desc: called, 0x0/0, 0x0/0, 0x0/0
ath0: ath_edma_setup_rxfifo: type=3D0, FIFO depth =3D 16 entries
ath0: ath_edma_setup_rxfifo: type=3D1, FIFO depth =3D 128 entries
ath0: [HT] enabling HT modes
ath0: [HT] enabling short-GI in 20MHz mode
ath0: [HT] 1 stream STBC receive enabled
ath0: [HT] 1 RX streams; 1 TX streams
ath0: AR9485 mac 576.1 RF5110 phy 1638.6
ath0: 2GHz radio: 0x0000; 5GHz radio: 0x0000
pcib3: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
pci3: <ACPI PCI bus> on pcib3
pci3: <network, ethernet> at device 0.0 (no driver attached)
ehci1: <Intel Panther Point USB 2.0 controller> mem 0xf7e1f000-0xf7e1f3ff i=
rq 23 at device 29.0 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci1
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Panther Point AHCI SATA controller> port 0xf0b0-0xf0b7,0xf0a0=
-0xf0a3,0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xf7e1e000-0xf7e1e7ff=
irq 19 at device 31.2 on pci0
ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pci0: <dasp> at device 31.6 (no driver attached)
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
acpi_tz0: <Thermal Zone> port 0x100-0x107 on acpi0
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=3D0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ppc0: cannot reserve I/O port range
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
coretemp2: <CPU On-Die Thermal Sensors> on cpu2
est2: <Enhanced SpeedStep Frequency Control> on cpu2
p4tcc2: <CPU Frequency Thermal Control> on cpu2
coretemp3: <CPU On-Die Thermal Sensors> on cpu3
est3: <Enhanced SpeedStep Frequency Control> on cpu3
p4tcc3: <CPU Frequency Thermal Control> on cpu3
fuse-freebsd: version 0.4.4, FUSE ABI 7.8
Timecounters tick every 1.000 msec
vboxdrv: fAsync=3D0 offMin=3D0x250 offMax=3D0x64c
hdacc0: <Realtek ALC269 HDA CODEC> at cad 0 on hdac0
hdaa0: <Realtek ALC269 Audio Function Group> at nid 1 on hdacc0
pcm0: <Realtek ALC269 (Internal Analog)> at nid 20 and 18 on hdaa0
pcm1: <Realtek ALC269 (Right Analog Headphones)> at nid 26 on hdaa0
hdacc1: <Intel Panther Point HDA CODEC> at cad 3 on hdac0
hdaa1: <Intel Panther Point Audio Function Group> at nid 1 on hdacc1
pcm2: <Intel Panther Point (HDMI/DP 8ch)> at nid 6 on hdaa1
random: unblocking device.
usbus0: 5.0Gbps Super Speed USB v3.0
usbus1: 480Mbps High Speed USB v2.0
usbus2: 480Mbps High Speed USB v2.0
ugen1.1: <Intel> at usbus1
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ugen0.1: <0x8086> at usbus0
uhub1: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ugen2.1: <Intel> at usbus2
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
ses0 at ahciem0 bus 0 scbus1 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <ST500LT012-9WS142 0001SDM1> ATA-8 SATA 2.x device
ada0: Serial Number S0V1T5WZ
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 476940MB (976773168 512 byte sectors: 16H 63S/T 16383C)
ada0: quirks=3D0x1<4K>
ada0: Previously was known as ad4
Netvsc initializing... SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #3 Launched!
Timecounter "TSC" frequency 1795961472 Hz quality 1000
Root mount waiting for: usbus2 usbus1 usbus0
uhub1: 8 ports with 8 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub0: 2 ports with 2 removable, self powered
ugen0.2: <Initio> at usbus0
umass0: <Initio CDRWDVD TSL462C, class 0/0, rev 2.00/1.06, addr 1> on usbus0
umass0: 8070i (ATAPI) over Bulk-Only; quirks =3D 0x4000
umass0:2:0:-1: Attached to scbus2
Root mount waiting for: usbus2 usbus1 usbus0
cd0 at umass-sim0 bus 0 scbus2 target 0 lun 0
cd0: <TSSTcorp CDRW/DVD TSL462C DE01> Removable CD-ROM SCSI-0 device=20
cd0: 40.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present - t=
ray open
cd0: quirks=3D0x10<10_BYTE_ONLY>
ugen0.3: <vendor 0x2109> at usbus0
uhub3: <vendor 0x2109 USB 2.0 HUB, class 9/0, rev 2.00/85.70, addr 2> on us=
bus0
ugen2.2: <vendor 0x8087> at usbus2
uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on =
usbus2
ugen1.2: <vendor 0x8087> at usbus1
uhub5: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on =
usbus1
uhub3: 4 ports with 4 removable, self powered
Root mount waiting for: usbus2 usbus1 usbus0
uhub4: 6 ports with 6 removable, self powered
uhub5: 6 ports with 6 removable, self powered
ugen0.4: <vendor 0x2109> at usbus0
uhub6: <vendor 0x2109 USB 2.0 HUB, class 9/0, rev 2.00/85.70, addr 3> on us=
bus0
ugen1.3: <Atheros Communications> at usbus1
Root mount waiting for: usbus1 usbus0
uhub6: 4 ports with 4 removable, self powered
ugen1.4: <Azurewave> at usbus1
ugen0.5: <Logitech> at usbus0
ukbd0: <USB Keyboard> on usbus0
kbd2 at ukbd0
Root mount waiting for: usbus1 usbus0
ugen1.5: <Atmel> at usbus1
hid_get_item: Number of items truncated to 255
ugen0.6: <Kensington> at usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
ugen0.7: <vendor 0x1f75> at usbus0
umass1: <vendor 0x1f75 product 0x0621, class 0/0, rev 2.10/0.36, addr 6> on=
usbus0
umass1: SCSI over Bulk-Only; quirks =3D 0x0100
umass1:3:1:-1: Attached to scbus3
da0 at umass-sim1 bus 1 scbus3 target 0 lun 0
da0: <ST2000DL 003-9VT166 > Fixed Direct Access SCSI-6 device=20
da0: Serial Number 1
da0: 40.000MB/s transfers
da0: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
da0: quirks=3D0xa<NO_6_BYTE,4K>
Root mount waiting for: usbus0
ugen0.8: <vendor 0x1f75> at usbus0
umass2: <vendor 0x1f75 product 0x0621, class 0/0, rev 2.10/0.36, addr 7> on=
usbus0
umass2: SCSI over Bulk-Only; quirks =3D 0x0100
umass2:4:2:-1: Attached to scbus4
Trying to mount root from ufs:ada0p4 []...
da1 at umass-sim2 bus 2 scbus4 target 0 lun 0
da1: <ST310005 28AS > Fixed Direct Access SCSI-6 device=20
da1: Serial Number 1
da1: 40.000MB/s transfers
da1: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C)
da1: quirks=3D0x2<NO_6_BYTE>
wlan0: Ethernet address: 20:16:d8:f8:89:a4
ath0: ath_reset_grablock: didn't finish after 10 iterations
ath0: ath_reset_grablock: warning, recursive reset path!
ath0: ath_reset: concurrent reset! Danger!
ath0: ath_edma_recv_tasklet: sc_inreset_cnt > 0; skipping
ath0: ath_raw_xmit: sc_inreset_cnt > 0; bailing
ath0: ath_reset_grablock: didn't finish after 10 iterations
ath0: ath_reset_grablock: warning, recursive reset path!
ath0: ath_reset: concurrent reset! Danger!
ath0: ath_raw_xmit: sc_inreset_cnt > 0; bailing
ath0: ath_raw_xmit: sc_inreset_cnt > 0; bailing
ath0: ath_reset_grablock: didn't finish after 10 iterations
ath0: ath_reset_grablock: warning, recursive reset path!
ath0: ath_reset: concurrent reset! Danger!
ath0: ath_raw_xmit: sc_inreset_cnt > 0; bailing
ath0: ath_raw_xmit: sc_inreset_cnt > 0; bailing
hid_get_item: Number of items truncated to 255
hid_get_item: Number of items truncated to 255
hid_get_item: Number of items truncated to 255
uhid0: <Atmel maXTouch Digitizer> on usbus1
uhid1: <USB Keyboard> on usbus0
hid_get_item: Number of items truncated to 255
hid_get_item: Number of items truncated to 255
hid_get_item: Number of items truncated to 255
uhid2: <Atmel maXTouch Control> on usbus1
ums0: <Kensington Kensington Expert Mouse, class 0/0, rev 1.10/1.00, addr 5=
> on usbus0
ums0: 4 buttons and [XYZ] coordinates ID=3D0
ath0: ath_reset_grablock: didn't finish after 10 iterations
ath0: ath_reset_grablock: warning, recursive reset path!
ath0: ath_reset: concurrent reset! Danger!
ath0: ath_raw_xmit: sc_inreset_cnt > 0; bailing
ath0: ath_raw_xmit: sc_inreset_cnt > 0; bailing
ath0: ath_edma_recv_tasklet: sc_inreset_cnt > 0; skipping
ath0: ath_reset_grablock: didn't finish after 10 iterations
ath0: ath_reset_grablock: warning, recursive reset path!
ath0: ath_reset: concurrent reset! Danger!
ath0: ath_raw_xmit: sc_inreset_cnt > 0; bailing
ath0: ath_raw_xmit: sc_inreset_cnt > 0; bailing
[ 544.182]=20
X.Org X Server 1.12.4
Release Date: 2012-08-27
[ 544.183] X Protocol Version 11, Revision 0
[ 544.183] Build Operating System: FreeBSD 10.0-RELEASE-p7 amd64=20
[ 544.184] Current Operating System: FreeBSD n4rky.localhost 10.0-RELEASE=
-p7 FreeBSD 10.0-RELEASE-p7 #0: Tue Jul 8 06:37:44 UTC 2014 root@amd64=
-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC amd64
[ 544.187] Build Date: 20 July 2014 04:27:03AM
[ 544.187] =20
[ 544.187] Current version of pixman: 0.32.4
[ 544.187] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 544.187] Markers: (--) probed, (**) from config file, (=3D=3D) default =
setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 544.188] (=3D=3D) Log file: "/var/log/Xorg.0.log", Time: Mon Jul 21 19:=
25:24 2014
[ 544.189] (II) Loader magic: 0x7b74f0
[ 544.189] (II) Module ABI versions:
[ 544.189] X.Org ANSI C Emulation: 0.4
[ 544.189] X.Org Video Driver: 12.1
[ 544.189] X.Org XInput driver : 16.0
[ 544.189] X.Org Server Extension : 6.0
[ 544.191] (--) PCI:*(0:0:2:0) 8086:0166:1043:108d rev 9, Mem @ 0xf780000=
0/4194304, 0xe0000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/655=
36
[ 544.212] List of video drivers:
[ 544.212] r128
[ 544.212] openchrome
[ 544.212] nv
[ 544.213] mach64
[ 544.213] intel
[ 544.213] ati
[ 544.213] radeon
[ 544.213] vesa
[ 544.214] (II) LoadModule: "r128"
[ 544.248] (II) Loading /usr/local/lib/xorg/modules/drivers/r128_drv.so
[ 544.251] (EE) Failed to load /usr/local/lib/xorg/modules/drivers/r128_d=
rv.so: /usr/local/lib/xorg/modules/drivers/r128_drv.so: Undefined symbol "m=
iEmptyData"
[ 544.251] (II) UnloadModule: "r128"
[ 544.251] (II) Unloading r128
[ 544.251] (EE) Failed to load module "r128" (loader failed, 7)
[ 544.251] (II) LoadModule: "openchrome"
[ 544.256] (II) Loading /usr/local/lib/xorg/modules/drivers/openchrome_dr=
v.so
[ 544.267] (EE) Failed to load /usr/local/lib/xorg/modules/drivers/opench=
rome_drv.so: /usr/local/lib/xorg/modules/drivers/openchrome_drv.so: Undefin=
ed symbol "miEmptyData"
[ 544.267] (II) UnloadModule: "openchrome"
[ 544.267] (II) Unloading openchrome
[ 544.267] (EE) Failed to load module "openchrome" (loader failed, 7)
[ 544.267] (II) LoadModule: "nv"
[ 544.272] (II) Loading /usr/local/lib/xorg/modules/drivers/nv_drv.so
[ 544.280] (EE) Failed to load /usr/local/lib/xorg/modules/drivers/nv_drv=
=2Eso: /usr/local/lib/xorg/modules/drivers/nv_drv.so: Undefined symbol "miE=
mptyData"
[ 544.280] (II) UnloadModule: "nv"
[ 544.280] (II) Unloading nv
[ 544.280] (EE) Failed to load module "nv" (loader failed, 7)
[ 544.280] (II) LoadModule: "mach64"
[ 544.286] (II) Loading /usr/local/lib/xorg/modules/drivers/mach64_drv.so
[ 544.293] (EE) Failed to load /usr/local/lib/xorg/modules/drivers/mach64=
_drv.so: /usr/local/lib/xorg/modules/drivers/mach64_drv.so: Undefined symbo=
l "miEmptyData"
[ 544.293] (II) UnloadModule: "mach64"
[ 544.293] (II) Unloading mach64
[ 544.293] (EE) Failed to load module "mach64" (loader failed, 7)
[ 544.293] (II) LoadModule: "intel"
[ 544.299] (II) Loading /usr/local/lib/xorg/modules/drivers/intel_drv.so
[ 544.385] (II) Module intel: vendor=3D"X.Org Foundation"
[ 544.385] compiled for 1.12.4, module version =3D 2.21.15
[ 544.385] Module class: X.Org Video Driver
[ 544.385] ABI class: X.Org Video Driver, version 12.1
[ 544.385] (II) LoadModule: "ati"
[ 544.391] (II) Loading /usr/local/lib/xorg/modules/drivers/ati_drv.so
[ 544.392] (II) Module ati: vendor=3D"X.Org Foundation"
[ 544.392] compiled for 1.12.4, module version =3D 7.2.0
[ 544.392] Module class: X.Org Video Driver
[ 544.392] ABI class: X.Org Video Driver, version 12.1
[ 544.392] (II) LoadModule: "radeon"
[ 544.398] (II) Loading /usr/local/lib/xorg/modules/drivers/radeon_drv.so
[ 544.419] (II) Module radeon: vendor=3D"X.Org Foundation"
[ 544.419] compiled for 1.12.4, module version =3D 7.2.0
[ 544.419] Module class: X.Org Video Driver
[ 544.420] ABI class: X.Org Video Driver, version 12.1
[ 544.420] (II) LoadModule: "vesa"
[ 544.426] (II) Loading /usr/local/lib/xorg/modules/drivers/vesa_drv.so
[ 544.437] (II) Module vesa: vendor=3D"X.Org Foundation"
[ 544.437] compiled for 1.7.7, module version =3D 2.3.3
[ 544.438] Module class: X.Org Video Driver
[ 544.438] ABI class: X.Org Video Driver, version 6.0
[ 544.438] (EE) module ABI major version (6) doesn't match the server's v=
ersion (12)
[ 544.438] (II) UnloadModule: "vesa"
[ 544.438] (II) Unloading vesa
[ 544.438] (EE) Failed to load module "vesa" (module requirement mismatch=
, 0)
[ 544.439] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, HD Graphics,
HD Graphics 2000, HD Graphics 3000, HD Graphics 2500,
HD Graphics 4000, HD Graphics P4000, HD Graphics 4600,
HD Graphics 5000, HD Graphics P4600/P4700, Iris(TM) Graphics 5100,
HD Graphics 4400, HD Graphics 4200, Iris(TM) Pro Graphics 5200
[ 544.541] (++) Using config file: "/root/xorg.conf.new"
[ 544.543] (=3D=3D) ServerLayout "X.org Configured"
[ 544.543] (**) |-->Screen "Screen0" (0)
[ 544.543] (**) | |-->Monitor "Monitor0"
[ 544.564] (**) | |-->Device "Card0"
[ 544.564] (**) |-->Input Device "Mouse0"
[ 544.564] (**) |-->Input Device "Keyboard0"
[ 544.564] (=3D=3D) Automatically adding devices
[ 544.564] (=3D=3D) Automatically enabling devices
[ 544.577] (WW) `fonts.dir' not found (or not valid) in "/usr/local/lib/X=
11/fonts/misc/".
[ 544.577] Entry deleted from font path.
[ 544.577] (Run 'mkfontdir' on "/usr/local/lib/X11/fonts/misc/").
[ 544.603] (WW) `fonts.dir' not found (or not valid) in "/usr/local/lib/X=
11/fonts/TTF/".
[ 544.603] Entry deleted from font path.
[ 544.603] (Run 'mkfontdir' on "/usr/local/lib/X11/fonts/TTF/").
[ 544.629] (WW) `fonts.dir' not found (or not valid) in "/usr/local/lib/X=
11/fonts/Type1/".
[ 544.629] Entry deleted from font path.
[ 544.630] (Run 'mkfontdir' on "/usr/local/lib/X11/fonts/Type1/").
[ 544.667] (WW) `fonts.dir' not found (or not valid) in "/usr/local/lib/X=
11/fonts/100dpi/".
[ 544.667] Entry deleted from font path.
[ 544.667] (Run 'mkfontdir' on "/usr/local/lib/X11/fonts/100dpi/").
[ 544.686] (WW) `fonts.dir' not found (or not valid) in "/usr/local/lib/X=
11/fonts/75dpi/".
[ 544.686] Entry deleted from font path.
[ 544.686] (Run 'mkfontdir' on "/usr/local/lib/X11/fonts/75dpi/").
[ 544.686] (WW) `fonts.dir' not found (or not valid) in "/usr/local/lib/X=
11/fonts/misc/".
[ 544.686] Entry deleted from font path.
[ 544.686] (Run 'mkfontdir' on "/usr/local/lib/X11/fonts/misc/").
[ 544.686] (WW) `fonts.dir' not found (or not valid) in "/usr/local/lib/X=
11/fonts/TTF/".
[ 544.686] Entry deleted from font path.
[ 544.687] (Run 'mkfontdir' on "/usr/local/lib/X11/fonts/TTF/").
[ 544.687] (WW) `fonts.dir' not found (or not valid) in "/usr/local/lib/X=
11/fonts/Type1/".
[ 544.687] Entry deleted from font path.
[ 544.687] (Run 'mkfontdir' on "/usr/local/lib/X11/fonts/Type1/").
[ 544.687] (WW) `fonts.dir' not found (or not valid) in "/usr/local/lib/X=
11/fonts/100dpi/".
[ 544.687] Entry deleted from font path.
[ 544.687] (Run 'mkfontdir' on "/usr/local/lib/X11/fonts/100dpi/").
[ 544.688] (WW) `fonts.dir' not found (or not valid) in "/usr/local/lib/X=
11/fonts/75dpi/".
[ 544.688] Entry deleted from font path.
[ 544.688] (Run 'mkfontdir' on "/usr/local/lib/X11/fonts/75dpi/").
[ 544.688] (**) FontPath set to:
/usr/local/lib/X11/fonts/OTF/,
/usr/local/lib/X11/fonts/OTF/
[ 544.688] (**) ModulePath set to "/usr/local/lib/xorg/modules"
[ 544.688] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' o=
r 'vmmouse' will be disabled.
[ 544.688] (WW) Disabling Mouse0
[ 544.688] (WW) Disabling Keyboard0
[ 546.330]=20
[ 546.330]=20
Xorg detected your mouse at device /dev/sysmouse.
Please check your config if the mouse is still not
operational, as by default Xorg tries to autodetect
the protocol.
[ 546.330]=20
Your xorg.conf file is /root/xorg.conf.new
[ 546.330] To test the server, run 'X -config /root/xorg.conf.new'
[ 546.330] Server terminated with error (2). Closing log file.
Thanks!
--=20
David Benfell <benfell@parts-unknown.org>
See https://parts-unknown.org/node/2 if you don't understand the
attachment.
--y0ulUmNC+osPPQO6
Content-Type: application/pgp-signature
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=sGiM
-----END PGP SIGNATURE-----
--y0ulUmNC+osPPQO6--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20140722024643.GA29536>