Date: Wed, 28 Aug 2002 10:31:45 +1000 From: Neal Nelson <neal@nelson.name> To: freebsd-stable@freebsd.org Subject: Datafab USB CompactFlash Card Reader Message-ID: <20020828003145.GC467@server>
next in thread | raw e-mail | index | archive | help
--8t9RHnE3ZwKMSgU+
Content-Type: text/plain; format=flowed; charset=ISO-8859-1
Content-Disposition: inline
Content-Transfer-Encoding: 8bit
Hi there.
I'm afraid I have a problem with another one of those USB CompactFlash
readers. It's a Datafab KECF-USBG.
I believe that I have my kernel set up correctly (-Stable as of
yesterday). When I insert the reader, I get the following:
umass0: USB Mass Storage, rev 1.10/1.13, addr2
umass0: Get Max Lun not supported (STALLED)
umass0: BBB reset failed, IOERROR
umass0: BBB Bulk-in clear stall failed, IOERROR
umass0: BBB Bulk-out clear stall failed, IOERROR
umass0: BBB reset failed, IOERROR
umass0: BBB Bulk-in clear stall failed, IOERROR
umass0: BBB Bulk-out clear stall failed, IOERROR
umass0: BBB reset failed, IOERROR
umass0: BBB Bulk-in clear stall failed, IOERROR
umass0: BBB Bulk-out clear stall failed, IOERROR
umass0: BBB reset failed, IOERROR
umass0: at uhub0 port 1 (addr 2) disconnected
umass0: detached
Fatal Trap 12: page fault while in kernel mode
fault virtual address = 0xdeadc0f2
fault code = supervisor read, page not
present
instruction pointer = 0x8:0xc0287632
stack pointer = 0x10:0x0c34c6f8
frame pointer = 0x10:0xc034c70c
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres
1, def32 1, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = Idle
interrupt mask = bio
kernel: type 12 trap, code=0
Stopped at usb_transfer_complete+0x96: cmpl
$0,0x14(%eax)
db>
My initial thought was to try and set up a quirk but as you can see, I
never get a name that I can enter into the quirk table.
I tried the same reader out yesterday on a friends Windows 2000 machine
and it just worked without a driver, so it seems to be a pretty
standard umass device.
Attached is the output of dmesg after I rebooted the machine. It
contains the same error messages but without the panic at the end for
some reason.
Any help would be gratefully accepted.
--8t9RHnE3ZwKMSgU+
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename="dmesg.log"
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.6-STABLE #0: Tue Aug 27 14:40:52 EST 2002
root@deskpro.home.neal.nelson.name:/usr/obj/usr/src/sys/DESKPRO
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (930.32-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x68a Stepping = 10
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 267386880 (261120K bytes)
avail memory = 255877120 (249880K bytes)
Preloaded elf kernel "kernel" at 0xc0437000.
VESA: v3.0, 1024k memory, flags:0x1, mode table:0xc03af7c2 (1000022)
VESA: Intel(R) 815 Chipset Video BIOS
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 11 entries at 0xc00e8810
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
agp0: <Intel 82815 (i815 GMCH) SVGA controller> mem 0x40300000-0x4037ffff,0x44000000-0x47ffffff irq 11 at device 2.0 on pci0
pcib1: <Intel 82801BA/BAM (ICH2) Hub to PCI bridge> at device 30.0 on pci0
pci2: <PCI bus> on pcib1
fxp0: <Intel Pro/100 Ethernet> port 0x1000-0x103f mem 0x40000000-0x40000fff irq 5 at device 8.0 on pci2
fxp0: Ethernet address 00:02:a5:90:88:9e
inphy0: <i82562EM 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
wi0: <Intersil Prism2.5> mem 0x40400000-0x40400fff irq 10 at device 9.0 on pci2
wi0: 802.11 address: 00:05:5d:5b:a8:c0
wi0: using RF:PRISM2.5 MAC:ISL3874A(Mini-PCI)
wi0: Intersil Firmware: Primary 1.00.05, Station 1.03.04
isab0: <Intel 82801BA/BAM (ICH2) PCI to LPC bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH2 ATA100 controller> port 0x2460-0x246f at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-B> port 0x2440-0x245f irq 10 at device 31.4 on pci0
usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-B> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
umass0: USB Mass Storage, rev 1.10/1.13, addr 2
umass0: Get Max Lun not supported (STALLED)
pcm0: <Intel 82801BA (ICH2)> port 0x2400-0x243f,0x2000-0x20ff irq 5 at device 31.5 on pci0
orm0: <Option ROMs> at iomem 0xc0000-0xc9fff,0xca000-0xd77ff,0xe0000-0xeffff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/13 bytes threshold
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
IPsec: Initialized Security Association Processing.
ad0: 14324MB <WDC WD150BB-60AUA1> [29104/16/63] at ata0-master UDMA100
acd0: CDROM <Compaq CD-ROM SC-148E> at ata1-master PIO4
pcm0: measured ac97 link rate at 55939 Hz
umass0: BBB reset failed, IOERROR
umass0: BBB bulk-in clear stall failed, IOERROR
umass0: BBB bulk-out clear stall failed, IOERROR
umass0: BBB reset failed, IOERROR
umass0: BBB bulk-in clear stall failed, IOERROR
umass0: BBB bulk-out clear stall failed, IOERROR
umass0: BBB reset failed, IOERROR
umass0: BBB bulk-in clear stall failed, IOERROR
umass0: BBB bulk-out clear stall failed, IOERROR
umass0: BBB reset failed, IOERROR
umass0: BBB bulk-in clear stall failed, IOERROR
umass0: BBB bulk-out clear stall failed, IOERROR
umass0: BBB reset failed, IOERROR
umass0: BBB bulk-in clear stall failed, IOERROR
umass0: BBB bulk-out clear stall failed, IOERROR
umass0: BBB reset failed, IOERROR
umass0: BBB bulk-in clear stall failed, IOERROR
umass0: BBB bulk-out clear stall failed, IOERROR
Mounting root from ufs:/dev/ad0s1a
umass0: BBB reset failed, IOERROR
umass0: BBB bulk-in clear stall failed, IOERROR
umass0: BBB bulk-out clear stall failed, IOERROR
WARNING: / was not properly dismounted
umass0: BBB reset failed, IOERROR
umass0: BBB bulk-in clear stall failed, IOERROR
umass0: BBB bulk-out clear stall failed, IOERROR
umass0: BBB reset failed, IOERROR
umass0: BBB bulk-in clear stall failed, IOERROR
umass0: BBB bulk-out clear stall failed, IOERROR
umass0: BBB reset failed, IOERROR
umass0: BBB bulk-in clear stall failed, IOERROR
umass0: BBB bulk-out clear stall failed, IOERROR
umass0: BBB reset failed, IOERROR
umass0: BBB bulk-in clear stall failed, IOERROR
umass0: BBB bulk-out clear stall failed, IOERROR
(da0:umass-sim0:0:0:0): got CAM status 0x4
(da0:umass-sim0:0:0:0): fatal error, failed to attach to device
(da0:umass-sim0:0:0:0): lost device
(da0:umass-sim0:0:0:0): removing device entry
umass0: at uhub0 port 1 (addr 2) disconnected
umass0: detached
--8t9RHnE3ZwKMSgU+--
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20020828003145.GC467>