Date: Fri, 31 Aug 2018 13:25:02 -0600 From: Samuel Chow <cyschow@shaw.ca> To: Eugene Grosbein <eugen@grosbein.net>, stable@freebsd.org Subject: Re: Cannot setup dumpdev on glabel disk Message-ID: <cbaa6bb2-8e93-6f20-9f3f-80d7c2bda4bd@shaw.ca> In-Reply-To: <6f6685d0-08c6-dbe2-62b5-3628f91917d9@grosbein.net> References: <19f80f48-5fea-e105-18b2-1a64e06acc79@shaw.ca> <6f6685d0-08c6-dbe2-62b5-3628f91917d9@grosbein.net>
index | next in thread | previous in thread | raw e-mail
On 8/31/2018 1:09 PM, Eugene Grosbein wrote:
> 31.08.2018 23:08, Samuel Chow wrote:
>
>> I am running 11-STABLE, and I am experiencing kernel panics when I am destroying a VIMAGE-based jail. Naturally, I flipped to the chapter about 'Kernel Debugging' to learn about 'Obtaining a Kernel Crash Dump'.
>>
>> However, I am finding that my permanently glabel'ed disk partition cannot be used as dumpdev. Is that true, and why not? I mean, swap can use it just fine. I am unable to find this restriction in the documentation.
>>
>>
>> # grep swap /etc/fstab
>> /dev/label/boot01b none swap sw 0 0
>> # swapinfo
>> Device 1K-blocks Used Avail Capacity
>> /dev/label/boot01b 41943040 0 41943040 0%
>> # glabel status | grep boot
>> label/boot01 N/A ada4s1
>> label/boot02 N/A ada5s1
>> # dumpon /dev/label/boot01b
>> dumpon: ioctl(DIOCSKERNELDUMP): Operation not supported by device
> That's not about label but underlying device that seems to be GEOM_PART_MBR
> and it allows kernel dumps only if slice (MBR partition) type is 0xa5 for "freebsd"
> or 0x82 ("linux swap"). Please show output of the command "gpart show ada4".
>
>
I do have "freebsd" (0xa5) type configured on the MBR partition.
# gpart show ada4
=> 63 937703025 ada4 MBR (447G)
63 937703025 1 freebsd [active] (447G)
# gpart show -r ada4
=> 63 937703025 ada4 MBR (447G)
63 937703025 1 165 [active] (447G)
home |
help
Want to link to this message? Use this
URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?cbaa6bb2-8e93-6f20-9f3f-80d7c2bda4bd>