Date: Thu, 23 Sep 2010 14:18:22 +0400 From: pluknet <pluknet@gmail.com> To: freebsd-scsi <freebsd-scsi@freebsd.org> Subject: mptutil shows two volumes as with index 0 Message-ID: <AANLkTik5EGfnSxhVfiJznkGpRjb_86UdwYJ4DXd=hdyu@mail.gmail.com>
next in thread | raw e-mail | index | archive | help
Hi.
Seen on xSeries x3550 M2 with IBM SR-BR10i (C1068E).
This is FreeBSD 8.1 amd64.
HW config and further info below.
# dmesg | grep mpt
mpt0: <LSILogic SAS/SATA Adapter> port 0x1000-0x10ff mem
0x97910000-0x97913fff,0x97900000-0x9790ffff irq 16 at device 0.0 on
pci1
mpt0: [ITHREAD]
mpt0: MPI Version=1.5.20.0
mpt0: Capabilities: ( RAID-0 RAID-1E RAID-1 )
mpt0: 2 Active Volumes (2 Max)
mpt0: 4 Hidden Drive Members (14 Max)
mpt0:vol0(mpt0:0:0): Settings ( Member-WCE Hot-Plug-Spares )
mpt0:vol0(mpt0:0:0): Using Spare Pool: 0
mpt0:vol0(mpt0:0:0): 2 Members:
(mpt0:1:5:0): Primary Online
(mpt0:1:6:0): Secondary Online
mpt0:vol0(mpt0:0:0): RAID-1 - Optimal
mpt0:vol0(mpt0:0:0): Status ( Enabled )
(mpt0:vol0:1): Physical (mpt0:0:6:0), Pass-thru (mpt0:1:0:0)
(mpt0:vol0:1): Online
(mpt0:vol0:0): Physical (mpt0:0:5:0), Pass-thru (mpt0:1:1:0)
(mpt0:vol0:0): Online
(mpt0:0:7): Physical (mpt0:0:7:0), Pass-thru (mpt0:1:2:0)
(mpt0:0:7): Online
(mpt0:0:4): Physical (mpt0:0:4:0), Pass-thru (mpt0:1:3:0)
(mpt0:0:4): Online
(xpt0:mpt0:1:-1:-1): rescan already queued
da0 at mpt0 bus 0 scbus0 target 0 lun 0
da1 at mpt0 bus 0 scbus0 target 2 lun 0
mpt0@pci0:1:0:0: class=0x010000 card=0x03941014 chip=0x00581000
rev=0x08 hdr=0x00
vendor = 'LSI Logic (Was: Symbios Logic, NCR)'
device = 'SAS 3000 series, 8-port with 1068E -StorPort'
class = mass storage
subclass = SCSI
cap 01[50] = powerspec 2 supports D0 D1 D2 D3 current D0
cap 10[68] = PCI-Express 1 endpoint max data 128(4096) link x4(x8)
cap 05[98] = MSI supports 1 message, 64 bit
cap 11[b0] = MSI-X supports 1 message in map 0x14
# mptutil show config
mpt0 Configuration: 2 volumes, 4 drives
volume 0 (136G) RAID-1 OPTIMAL spans:
drive 1 (137G) ONLINE <IBM-ESXS MBD2147RC SB18> SAS
drive 0 (137G) ONLINE <IBM-ESXS MBD2147RC SB18> SAS
spare pools: 0
volume 0 (29G) RAID-1 OPTIMAL spans:
drive 2 (30G) ONLINE <SSDSA2SH032G1GN 8850> SATA
drive 3 (30G) ONLINE <SSDSA2SH032G1GN 8850> SATA
spare pools: 0
# mptutil show volumes
mpt0 Volumes:
Id Size Level Stripe State Write-Cache Name
0 ( 136G) RAID-1 OPTIMAL Enabled
0 ( 29G) RAID-1 OPTIMAL Disabled
# mptutil show drives
mpt0 Physical Drives:
0 ( 137G) ONLINE <IBM-ESXS MBD2147RC SB18> SAS bus 0 id 6
1 ( 137G) ONLINE <IBM-ESXS MBD2147RC SB18> SAS bus 0 id 5
2 ( 30G) ONLINE <SSDSA2SH032G1GN 8850> SATA bus 0 id 7
3 ( 30G) ONLINE <SSDSA2SH032G1GN 8850> SATA bus 0 id 4
# camcontrol devlist
<LSILOGIC Logical Volume 3000> at scbus0 target 0 lun 0 (da0,pass0)
<LSILOGIC Logical Volume 3000> at scbus0 target 2 lun 0 (da1,pass1)
--
wbr,
pluknet
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?AANLkTik5EGfnSxhVfiJznkGpRjb_86UdwYJ4DXd=hdyu>