Date: Fri, 25 Jun 1999 11:00:20 -0700 (PDT) From: Neal Westfall <nwestfal@Vorlon.odc.net> To: Soren Schmidt <sos@freebsd.dk> Cc: current@FreeBSD.ORG Subject: Re: UPDATE9: ATA/ATAPI driver new version available. Message-ID: <Pine.LNX.4.04.9906251056360.1244-100000@Vorlon.odc.net> In-Reply-To: <199906251732.TAA30325@freebsd.dk>
next in thread | previous in thread | raw e-mail | index | archive | help
Here is the complete output of dmesg in case it is helpful: Copyright (c) 1992-1999 The FreeBSD Project. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 4.0-CURRENT #106: Fri Jun 25 10:00:44 PDT 1999 root@Millennium.home.lan:/usr/src/sys/compile/MILLENNIUM Timecounter "i8254" frequency 1193182 Hz Timecounter "TSC" frequency 199309909 Hz CPU: Pentium Pro (199.31-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x617 Stepping=7 Features=0xf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV> real memory = 134217728 (131072K bytes) avail memory = 127590400 (124600K bytes) Preloaded elf kernel "kernel" at 0xc02ea000. Pentium Pro MTRR support enabled, default memory type is uncacheable Probing for PnP devices: CSN 1 Vendor ID: OPT0931 [0x3109143e] Serial 0xffffffff Comp ID: @@@0000 [0x00000000] AD_WAIT_INIT FAILED 1002 0xff mss_attach <OPTi931>1 at 0x530 irq 10 dma 3:5 flags 0x15 pcm1 (OPTi931 <OPTi931> sn 0xffffffff) at 0x530-0x537 irq 10 drq 3 flags 0x15 on isa npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <PCI host bus adapter> on motherboard pci0: <PCI bus> on pcib0 chip0: <Intel 82440FX (Natoma) PCI and memory controller> at device 0.0 on pci0 isab0: <Intel 82371SB PCI to ISA bridge> at device 1.0 on pci0 ata-pci0: <Intel PIIX3 IDE controller> at device 1.1 on pci0 ata-pci0: Busmastering DMA supported ata0 at 0x01f0 irq 14 on ata-pci0 de0: <Digital 21140A Fast Ethernet> irq 9 at device 10.0 on pci0 de0: 21140A [10-100Mb/s] pass 2.2 de0: address 00:40:05:36:73:56 vga-pci0: <ATI model 4750 graphics accelerator> irq 12 at device 12.0 on pci0 ncr0: <ncr 53c895 fast40 wide scsi> irq 15 at device 13.0 on pci0 isa0: <ISA bus> on motherboard fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> at fdc0 drive 0 atkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 vga0: <Generic ISA VGA> at port 0x3b0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> on isa0 sc0: VGA <16 virtual consoles, flags=0x200> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0 at port 0x378-0x37f irq 7 on isa0 ppc0: W83877F chipset (NIBBLE-only) in COMPATIBLE mode ppb0: IEEE1284 device found /NIBBLE/ECP/ECP_RLE Probing for PnP devices on ppbus0: ppbus0: <Hewlett-Packard HP LaserJet 5> PJL,MLC,PCL,PCLXL plip0: <PLIP network interface> on ppbus 0 lpt0: <generic printer> on ppbus 0 lpt0: Interrupt-driven port ppi0: <generic parallel i/o> on ppbus 0 acd0: < ICD-900AT/ A01> CDROM drive at ata0 as master acd0: drive speed 1367KB/sec, 120KB cache acd0: supported read types: CD-DA acd0: Audio: play, 255 volume levels acd0: Mechanism: ejectable tray acd0: Medium: CD-ROM 120mm data disc loaded, unlocked de0: enabling 100baseTX port ata_command: timeout waiting for interrupt Waiting 15 seconds for SCSI devices to settle changing root device to da0s1a da1 at ncr0 bus 0 target 1 lun 0 da1: <QUANTUM FIREBALL_TM2110S 300X> Fixed Direct Access SCSI-2 device da1: 20.000MB/s transfers (20.000MHz, offset 15), Tagged Queueing Enabled da1: 2014MB (4124736 512 byte sectors: 255H 63S/T 256C) da0 at ncr0 bus 0 target 0 lun 0 da0: <SEAGATE ST15150N 0023> Fixed Direct Access SCSI-2 device da0: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled da0: 4095MB (8388315 512 byte sectors: 255H 63S/T 522C) atapi_error: PREVENT_ALLOW - timeout error = 00 cd9660: RockRidge Extension cd9660: RockRidge Extension cd9660: RockRidge Extension The atapi_error was when I tried to mount it the first time after boot, and then I mounted/unmounted it 3 times with no problem. Neal To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.LNX.4.04.9906251056360.1244-100000>