Date: Sun, 12 Sep 2004 10:23:36 -0600 From: Gary Aitken <garya@dreamchaser.org> To: Tony Holmes <tony@crosswinds.net> Cc: freebsd-hardware@freebsd.org Subject: Re: Asus A7N8X-E w/SATA and SCSI, 4.10 sys install snafu Message-ID: <41447808.1000201@dreamchaser.org> In-Reply-To: <20040912122843.GA7321@crosswinds.net> References: <41438D6A.9000603@dreamchaser.org> <20040912122843.GA7321@crosswinds.net>
next in thread | previous in thread | raw e-mail | index | archive | help
I'm not sure I understand what you're saying. It sounds like the boot problem (not recognizing the scsi controller) is unrelated to the sata controller. Add in the sata controller and the system which boots (2940) no longer will; the newer controller (29160) presumably doesn't boot because it never was recognized in the first place. Can you look at what bios reports for pci bus assignments? I'm wondering whether there are irq conflicts in the 29160 case which aren't there in the 2940 case. Are there differences in the bios pci bus assignments when the sata controller is present, other than the addition of the sata controller itself? Tony Holmes wrote: > On +Sep 11, Gary Aitken wrote: > >>The BIOS reported devices and FreeBSD 4.10 boot probe (see below), >>show the scsi device (pci1 at 6.0, irq11), but fbsd doesn't recognize it. >> >>Freebsd isn't recognizing >> the buslogic controller (bt0) device (pci1, device 6.0), >> the sata device (pci1 device 11.0), >> or either of the network devices (pci0 device 4.0, pci1 device 4.0). > > > I can chime in with a "me too" here, but with an Adaptec 29160 and Promise > SATA controller. I successfully installed 4.9-RELEASE on a system. I later > cvsup'd to 4.10-Stable and the SCSI isn't seen at all. BIOS probes it, but > FreeBSD does not - appears to be a serious regression (which was reported > to -scsi but no response). > > For me the boot would hang at the "Resetting SCSI" stage of the boot and > not continue. Oddly, if I use an older 2940, it is recognized and the boot > continues. > > If the SATA card is in the system, neither will boot. >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?41447808.1000201>