Date: Sun, 30 Mar 2003 11:30:13 -0800 (PST) From: Deutscher Stefan <Deutscher.Stefan@bcg.com> To: freebsd-bugs@FreeBSD.org Subject: Re: misc/50053: FreeBSD 4.7/5.0 machine dies on scanpci Message-ID: <200303301930.h2UJUD9W080837@freefall.freebsd.org>
index | next in thread | raw e-mail
The following reply was made to PR misc/50053; it has been noted by GNATS.
From: Deutscher Stefan <Deutscher.Stefan@bcg.com>
To: "'freebsd-gnats-submit@FreeBSD.org'" <freebsd-gnats-submit@FreeBSD.org>,
"'sad@mailaps.org'" <sad@mailaps.org>
Cc:
Subject: Re: misc/50053: FreeBSD 4.7/5.0 machine dies on scanpci
Date: Sun, 30 Mar 2003 21:28:19 +0200
Hi all,
my machine still keeps crashing upon invoking scanpci or XFree 4.2.1.
I have meanwhile done three more things on a spare disk:
1) Tried to install Redhat Linux 8.0:
died with kernel panic in the install and I didn't have the patience
to fiddle with it
2) Installed Redhat Linux 3.0.3:
Worked just fine; X 3.1.2 came up after autoprobe and scanpci
completed without killing the box
3) Installed FreeBSD 4.3:
scanpci completes fine, X 3.6.x hangs the machine hard
Detailed log files for the last two attempts follow below. I am wondering
now: Is this
- a FreeBSD problem: after all, I don't think it should allow X to kill it,
- or an X problem: after all, older versions work, and scanpci shouldn't do
what it is doing to my box
Maybe I have to file a bug report with the XFree86 folks, too?
Any pointers are most appreciated, I am really getting desperate to get
X up on this box.
Thanks in advance, and below the gory details.
Stefan
Details:
1) Tried to install Redhat Linux 8.0: nothing to write home about
==================================================================
2) Installed Redhat Linux 3.0.3:
==================================
a) Output of dmesg
--------------------
Console: colour EGA+ 80x25, 1 virtual console (max 63)
bios32_init : BIOS32 Service Directory structure at 0x000f6e10
bios32_init : BIOS32 Service Directory entry at 0xf6e20
pcibios_init : PCI BIOS revision 2.00 entry at 0xf6e41
Probing PCI hardware.
Calibrating delay loop.. ok - 39.94 BogoMips
Serial driver version 4.11 with no serial options enabled
tty00 at 0x03f8 (irq = 4) is a 16550A
tty01 at 0x02f8 (irq = 3) is a 16550A
lp1 at 0x0378, using polling driver
PS/2 auxiliary pointing device detected -- driver installed.
tpqic02: Runtime config, $Revision: 0.4.1.5 $, $Date: 1994/10/29 02:46:13 $
tpqic02: DMA buffers: 20 blocks, at address 0x1ff400 (0x1ff3f4)
ftape: allocated 3 buffers aligned at: 00248000
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
scsi-ncr53c7,8xx : at PCI bus 0, device 7, function 0
scsi-ncr53c7,8xx : NCR53c810 at memory 0xffbdff00, io 0xfc00, irq 10
scsi0 : using io mapped access
scsi0 : using initiator ID 7
scsi0 : using edge triggered interrupts
scsi0 : burst length 8
scsi0 : using 40MHz SCSI clock
scsi0 : NCR code relocated to 0x3c82f0
scsi0 : test 1 started
scsi0 : NCR53c{7,8}xx (rel 4)
scsi : 1 host.
Vendor: IBM Model: DPES-31080 Rev: S31Q
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sda at scsi0, id 0, lun 0
Vendor: SEAGATE Model: ST39140N Rev: 1498
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sdb at scsi0, id 1, lun 0
Vendor: TOSHIBA Model: CD-ROM XM-4101TA Rev: 1084
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr0 at scsi0, id 2, lun 0
scsi : detected 1 SCSI cdrom 2 SCSI disks total.
SCSI Hardware sector size is 512 bytes on device sda
SCSI Hardware sector size is 512 bytes on device sdb
Memory: 63256k/66556k available (800k kernel code, 384k reserved, 2116k
data)
This processor honours the WP bit even when in supervisor mode. Good.
Swansea University Computer Society NET3.019
Swansea University Computer Society TCP/IP for NET3.019
IP Protocols: ICMP, UDP, TCP
Swansea University Computer Society IPX 0.29 BETA for NET3.019
IPX Portions Copyright (c) 1995 Caldera, Inc.
PPP: version 0.2.7 (4 channels) NEW_TTY_DRIVERS OPTIMIZE_FLAGS
TCP compression code copyright 1989 Regents of the University of California
PPP line discipline registered.
SLIP: version 0.8.3-NET3.019-NEWTTY (4 channels) (6 bit encapsulation
enabled)
CSLIP: code copyright 1989 Regents of the University of California
Checking 386/387 coupling... Ok, fpu using exception 16 error reporting.
Checking 'hlt' instruction... Ok.
Linux version 1.2.13 (root@daffy.redhat.com) (gcc version 2.7.0) #1 Sun Feb
11 08:28:08 EST 1996
Partition check:
sda: sda1 sda2
sdb: sdb1
RAMDISK: 1474560 bytes, starting at 0x00260000
VFS: Insert ramdisk floppy and press ENTER
VFS: Disk change detected on device 2/0
RAMDISK: Ext2 filesystem found at block 0
RAMDISK: Loading 1440 blocks into RAM
disk........................................................................
..................
done
VFS: Mounted root (ext2 filesystem).
Max size:292111 Log zone size:2048
First datazone:52 Root inode number 106496
ISO9660 Extensions: RRIP_1991A
VFS: Disk change detected on device 2/0
VFS: Can't find an ext2 filesystem on dev 2/0.
iBCS: socksys registered on character major 30
b) Output of scanpci
---------------------
PCI says configuration type 2
PCI probing configuration type 1
pci bus 0x0 cardnum 0x01, vendor 0xfefe device 0xfefe
Device unknown
STATUS 0xfeff COMMAND 0xfffe
CLASS 0xfe 0xfe 0xfe REVISION 0xfe
BIST 0xfe HEADER 0xfe LATENCY 0xfe CACHE 0xfe
BASE0 0xfefefefe addr 0xfefefef0 MEM
BASE1 0xfefefefe addr 0xfefefef0 MEM
BASE2 0xfefefefe addr 0xfefefef0 MEM
BASE3 0xfefefefe addr 0xfefefef0 MEM
BASE4 0xfefefefe addr 0xfefefef0 MEM
BASE5 0xfefefefe addr 0xfefefef0 MEM
BASEROM 0xfefefefe addr 0xfefe8000 not-decode-enabled
MAX_LAT 0xfe MIN_GNT 0xfe INT_PIN 0xfe INT_LINE 0xfe
pci bus 0x0 cardnum 0x02, vendor 0xfefe device 0xfefe
Device unknown
STATUS 0xfefe COMMAND 0xfefe
CLASS 0xfe 0xfe 0xfe REVISION 0xfe
BIST 0xfe HEADER 0xfe LATENCY 0xfe CACHE 0xfe
BASE0 0xfefefefe addr 0xfefefef0 MEM
BASE1 0xfefefefe addr 0xfefefef0 MEM
BASE2 0xfefefefe addr 0xfefefef0 MEM
BASE3 0xfefefefe addr 0xfefefef0 MEM
BASE4 0xfefefefe addr 0xfefefef0 MEM
BASE5 0xfefefefe addr 0xfefefef0 MEM
BASEROM 0xfefefefe addr 0xfefe8000 not-decode-enabled
MAX_LAT 0xfe MIN_GNT 0xfe INT_PIN 0xfe INT_LINE 0xfe
pci bus 0x0 cardnum 0x03, vendor 0xfefe device 0xfefe
Device unknown
STATUS 0xfefe COMMAND 0xfefe
CLASS 0xfe 0xfe 0xfe REVISION 0xfe
BIST 0xfe HEADER 0xfe LATENCY 0xfe CACHE 0xfe
BASE0 0xfefefefe addr 0xfefefef0 MEM
BASE1 0xfefefefe addr 0xfefefef0 MEM
BASE2 0xfefefefe addr 0xfefefef0 MEM
BASE3 0xfefefefe addr 0xfefefef0 MEM
BASE4 0xfefefefe addr 0xfefefef0 MEM
BASE5 0xfefefefe addr 0xfefefef0 MEM
BASEROM 0xfefefefe addr 0xfefe8000 not-decode-enabled
MAX_LAT 0xfe MIN_GNT 0xfe INT_PIN 0xfe INT_LINE 0xfe
pci bus 0x0 cardnum 0x04, vendor 0xfefe device 0xfefe
Device unknown
STATUS 0xfefe COMMAND 0xfefe
CLASS 0xfe 0xfe 0xfe REVISION 0xfe
BIST 0xfe HEADER 0xfe LATENCY 0xfe CACHE 0xfe
BASE0 0xfefefefe addr 0xfefefef0 MEM
BASE1 0xfefefefe addr 0xfefefef0 MEM
BASE2 0xfefefefe addr 0xfefefef0 MEM
BASE3 0xfefefefe addr 0xfefefef0 MEM
BASE4 0xfefefefe addr 0xfefefef0 MEM
BASE5 0xfefefefe addr 0xfefefef0 MEM
BASEROM 0xfefefefe addr 0xfefe8000 not-decode-enabled
MAX_LAT 0xfe MIN_GNT 0xfe INT_PIN 0xfe INT_LINE 0xfe
pci bus 0x0 cardnum 0x05, vendor 0xfefe device 0xfefe
Device unknown
STATUS 0xfefe COMMAND 0xfefe
CLASS 0xfe 0xfe 0xfe REVISION 0xfe
BIST 0xfe HEADER 0xfe LATENCY 0xfe CACHE 0xfe
BASE0 0xfefefefe addr 0xfefefef0 MEM
BASE1 0xfefefefe addr 0xfefefef0 MEM
BASE2 0xfefefefe addr 0xfefefef0 MEM
BASE3 0xfefefefe addr 0xfefefef0 MEM
BASE4 0xfefefefe addr 0xfefefef0 MEM
BASE5 0xfefefefe addr 0xfefefef0 MEM
BASEROM 0xfefefefe addr 0xfefe8000 not-decode-enabled
MAX_LAT 0xfe MIN_GNT 0xfe INT_PIN 0xfe INT_LINE 0xfe
pci bus 0x0 cardnum 0x06, vendor 0xfefe device 0xfeff
Device unknown
STATUS 0xfeff COMMAND 0xfefe
CLASS 0xfe 0xfe 0xfe REVISION 0xfe
BIST 0xfe HEADER 0xfe LATENCY 0xfe CACHE 0xfe
BASE0 0xfefefefe addr 0xfefefef0 MEM
BASE1 0xfefefefe addr 0xfefefef0 MEM
BASE2 0xfefefefe addr 0xfefefef0 MEM
BASE3 0xfefefefe addr 0xfefefef0 MEM
BASE4 0xfefefefe addr 0xfefefef0 MEM
BASE5 0xfefefefe addr 0xfefefef0 MEM
BASEROM 0xfefefefe addr 0xfefe8000 not-decode-enabled
MAX_LAT 0xfe MIN_GNT 0xfe INT_PIN 0xfe INT_LINE 0xfe
pci bus 0x0 cardnum 0x07, vendor 0xfefe device 0xfefe
Device unknown
STATUS 0xfefe COMMAND 0xfefe
CLASS 0xfe 0xfe 0xfe REVISION 0xfe
BIST 0xfe HEADER 0xfe LATENCY 0xfe CACHE 0xfe
BASE0 0xfefefefe addr 0xfefefef0 MEM
BASE1 0xfefefefe addr 0xfefefef0 MEM
BASE2 0xfefefefe addr 0xfefefef0 MEM
BASE3 0xfefefefe addr 0xfefefef0 MEM
BASE4 0xfefefefe addr 0xfefefef0 MEM
BASE5 0xfefefefe addr 0xfefefef0 MEM
BASEROM 0xfefefefe addr 0xfefe8000 not-decode-enabled
MAX_LAT 0xfe MIN_GNT 0xfe INT_PIN 0xfe INT_LINE 0xfe
pci bus 0x0 cardnum 0x08, vendor 0xfefe device 0xfefe
Device unknown
STATUS 0xfefe COMMAND 0xfefe
CLASS 0xfe 0xfe 0xfe REVISION 0xfe
BIST 0xfe HEADER 0xfe LATENCY 0xfe CACHE 0xfe
BASE0 0xfefefefe addr 0xfefefef0 MEM
BASE1 0xfefefefe addr 0xfefefef0 MEM
BASE2 0xfefefefe addr 0xfefefef0 MEM
BASE3 0xfefefefe addr 0xfefefef0 MEM
BASE4 0xfefefefe addr 0xfefefef0 MEM
BASE5 0xfefefefe addr 0xfefefef0 MEM
BASEROM 0xfefefefe addr 0xfefe8000 not-decode-enabled
MAX_LAT 0xfe MIN_GNT 0xfe INT_PIN 0xfe INT_LINE 0xfe
pci bus 0x0 cardnum 0x09, vendor 0xfefe device 0xfeff
Device unknown
STATUS 0xfefe COMMAND 0xfefe
CLASS 0xfe 0xfe 0xfe REVISION 0xfe
BIST 0xfe HEADER 0xfe LATENCY 0xfe CACHE 0xfe
BASE0 0xfefefefe addr 0xfefefef0 MEM
BASE1 0xfefefefe addr 0xfefefef0 MEM
BASE2 0xfefefefe addr 0xfefefef0 MEM
BASE3 0xfefefefe addr 0xfefefef0 MEM
BASE4 0xfefefefe addr 0xfefefef0 MEM
BASE5 0xfefefefe addr 0xfefefef0 MEM
BASEROM 0xfefefefe addr 0xfefe8000 not-decode-enabled
MAX_LAT 0xfe MIN_GNT 0xfe INT_PIN 0xfe INT_LINE 0xfe
pci bus 0x0 cardnum 0x0a, vendor 0xfefe device 0xfefe
Device unknown
STATUS 0xfefe COMMAND 0xfefe
CLASS 0xfe 0xfe 0xfe REVISION 0xfe
BIST 0xfe HEADER 0xfe LATENCY 0xfe CACHE 0xfe
BASE0 0xfefefefe addr 0xfefefef0 MEM
BASE1 0xfefefefe addr 0xfefefef0 MEM
BASE2 0xfefefefe addr 0xfefefef0 MEM
BASE3 0xfefefefe addr 0xfefefef0 MEM
BASE4 0xfefefefe addr 0xfefefef0 MEM
BASE5 0xfefefefe addr 0xfefefef0 MEM
BASEROM 0xfefefefe addr 0xfefe8000 not-decode-enabled
MAX_LAT 0xfe MIN_GNT 0xfe INT_PIN 0xfe INT_LINE 0xfe
pci bus 0x0 cardnum 0x0b, vendor 0xfefe device 0xfeff
Device unknown
STATUS 0xfefe COMMAND 0xfefe
CLASS 0xfe 0xfe 0xfe REVISION 0xfe
BIST 0xfe HEADER 0xfe LATENCY 0xfe CACHE 0xfe
BASE0 0xfefefefe addr 0xfefefef0 MEM
BASE1 0xfefefefe addr 0xfefefef0 MEM
BASE2 0xfefefefe addr 0xfefefef0 MEM
BASE3 0xfefefefe addr 0xfefefef0 MEM
BASE4 0xfefefefe addr 0xfefefef0 MEM
BASE5 0xfefefefe addr 0xfefefef0 MEM
BASEROM 0xfefefefe addr 0xfefe8000 not-decode-enabled
MAX_LAT 0xfe MIN_GNT 0xfe INT_PIN 0xfe INT_LINE 0xfe
pci bus 0x0 cardnum 0x0c, vendor 0xfefe device 0xfefe
Device unknown
STATUS 0xfefe COMMAND 0xfefe
CLASS 0xfe 0xfe 0xfe REVISION 0xfe
BIST 0xfe HEADER 0xfe LATENCY 0xfe CACHE 0xfe
BASE0 0xfefefefe addr 0xfefefef0 MEM
BASE1 0xfefefefe addr 0xfefefef0 MEM
BASE2 0xfefefefe addr 0xfefefef0 MEM
BASE3 0xfefefefe addr 0xfefefef0 MEM
BASE4 0xfefefefe addr 0xfefefef0 MEM
BASE5 0xfefefefe addr 0xfefefef0 MEM
BASEROM 0xfefefefe addr 0xfefe8000 not-decode-enabled
MAX_LAT 0xfe MIN_GNT 0xfe INT_PIN 0xfe INT_LINE 0xfe
pci bus 0x0 cardnum 0x0e, vendor 0xfefe device 0xfefe
Device unknown
STATUS 0xfefe COMMAND 0xfefe
CLASS 0xfe 0xfe 0xfe REVISION 0xfe
BIST 0xfe HEADER 0xfe LATENCY 0xfe CACHE 0xfe
BASE0 0xfefefefe addr 0xfefefef0 MEM
BASE1 0xfefefefe addr 0xfefefef0 MEM
BASE2 0xfefefefe addr 0xfefefef0 MEM
BASE3 0xfefefefe addr 0xfefefef0 MEM
BASE4 0xfefefefe addr 0xfefefef0 MEM
BASE5 0xfefefefe addr 0xfefefef0 MEM
BASEROM 0xfefefefe addr 0xfefe8000 not-decode-enabled
MAX_LAT 0xfe MIN_GNT 0xfe INT_PIN 0xfe INT_LINE 0xfe
pci bus 0x0 cardnum 0x0f, vendor 0xfefe device 0xfeff
Device unknown
STATUS 0xfefe COMMAND 0xfefe
CLASS 0xfe 0xfe 0xfe REVISION 0xfe
BIST 0xfe HEADER 0xfe LATENCY 0xfe CACHE 0xfe
BASE0 0xfefefefe addr 0xfefefef0 MEM
BASE1 0xfefefefe addr 0xfefefef0 MEM
BASE2 0xfefefefe addr 0xfefefef0 MEM
BASE3 0xfefefefe addr 0xfefefef0 MEM
BASE4 0xfefefefe addr 0xfefefef0 MEM
BASE5 0xfefefefe addr 0xfefefef0 MEM
BASEROM 0xfefefefe addr 0xfefe8000 not-decode-enabled
MAX_LAT 0xfe MIN_GNT 0xfe INT_PIN 0xfe INT_LINE 0xfe
pci bus 0x0 cardnum 0x10, vendor 0xfefe device 0xfefe
Device unknown
STATUS 0xfefe COMMAND 0xfefe
CLASS 0xfe 0xfe 0xfe REVISION 0xfe
BIST 0xfe HEADER 0xfe LATENCY 0xfe CACHE 0xfe
BASE0 0xfefefefe addr 0xfefefef0 MEM
BASE1 0xfefefefe addr 0xfefefef0 MEM
BASE2 0xfefefefe addr 0xfefefef0 MEM
BASE3 0xfefefefe addr 0xfefefef0 MEM
BASE4 0xfefefefe addr 0xfefefef0 MEM
BASE5 0xfefefefe addr 0xfefefef0 MEM
BASEROM 0xfefefefe addr 0xfefe8000 not-decode-enabled
MAX_LAT 0xfe MIN_GNT 0xfe INT_PIN 0xfe INT_LINE 0xfe
pci bus 0x0 cardnum 0x11, vendor 0xfefe device 0xfeff
Device unknown
STATUS 0xfefe COMMAND 0xfefe
CLASS 0xfe 0xfe 0xfe REVISION 0xfe
BIST 0xfe HEADER 0xfe LATENCY 0xfe CACHE 0xfe
BASE0 0xfefefefe addr 0xfefefef0 MEM
BASE1 0xfefefefe addr 0xfefefef0 MEM
BASE2 0xfefefefe addr 0xfefefef0 MEM
BASE3 0xfefefefe addr 0xfefefef0 MEM
BASE4 0xfefefefe addr 0xfefefef0 MEM
BASE5 0xfefefefe addr 0xfefefef0 MEM
BASEROM 0xfefefefe addr 0xfefe8000 not-decode-enabled
MAX_LAT 0xfe MIN_GNT 0xfe INT_PIN 0xfe INT_LINE 0xfe
pci bus 0x0 cardnum 0x12, vendor 0xfefe device 0xfefe
Device unknown
STATUS 0xfefe COMMAND 0xfefe
CLASS 0xfe 0xfe 0xfe REVISION 0xfe
BIST 0xfe HEADER 0xfe LATENCY 0xfe CACHE 0xfe
BASE0 0xfefefefe addr 0xfefefef0 MEM
BASE1 0xfefefefe addr 0xfefefef0 MEM
BASE2 0xfefefefe addr 0xfefefef0 MEM
BASE3 0xfefefefe addr 0xfefefef0 MEM
BASE4 0xfefefefe addr 0xfefefef0 MEM
BASE5 0xfefefefe addr 0xfefefef0 MEM
BASEROM 0xfefefefe addr 0xfefe8000 not-decode-enabled
MAX_LAT 0xfe MIN_GNT 0xfe INT_PIN 0xfe INT_LINE 0xfe
pci bus 0x0 cardnum 0x13, vendor 0xfefe device 0xfefe
Device unknown
STATUS 0xfefe COMMAND 0xfefe
CLASS 0xfe 0xfe 0xfe REVISION 0xfe
BIST 0xfe HEADER 0xfe LATENCY 0xfe CACHE 0xfe
BASE0 0xfefefefe addr 0xfefefef0 MEM
BASE1 0xfefefefe addr 0xfefefef0 MEM
BASE2 0xfefefefe addr 0xfefefef0 MEM
BASE3 0xfefefefe addr 0xfefefef0 MEM
BASE4 0xfefefefe addr 0xfefefef0 MEM
BASE5 0xfefefefe addr 0xfefefef0 MEM
BASEROM 0xfefefefe addr 0xfefe8000 not-decode-enabled
MAX_LAT 0xfe MIN_GNT 0xfe INT_PIN 0xfe INT_LINE 0xfe
pci bus 0x0 cardnum 0x14, vendor 0xfefe device 0xfefe
Device unknown
STATUS 0xfefe COMMAND 0xfefe
CLASS 0xfe 0xfe 0xfe REVISION 0xfe
BIST 0xfe HEADER 0xfe LATENCY 0xfe CACHE 0xfe
BASE0 0xfefefefe addr 0xfefefef0 MEM
BASE1 0xfefefefe addr 0xfefefef0 MEM
BASE2 0xfefefefe addr 0xfefefef0 MEM
BASE3 0xfefefefe addr 0xfefefef0 MEM
BASE4 0xfefefefe addr 0xfefefef0 MEM
BASE5 0xfefefefe addr 0xfefefef0 MEM
BASEROM 0xfefefefe addr 0xfefe8000 not-decode-enabled
MAX_LAT 0xfe MIN_GNT 0xfe INT_PIN 0xfe INT_LINE 0xfe
pci bus 0x0 cardnum 0x15, vendor 0xfefe device 0xfefe
Device unknown
STATUS 0xfefe COMMAND 0xfefe
CLASS 0xfe 0xfe 0xfe REVISION 0xfe
BIST 0xfe HEADER 0xfe LATENCY 0xfe CACHE 0xfe
BASE0 0xfefefefe addr 0xfefefef0 MEM
BASE1 0xfefefefe addr 0xfefefef0 MEM
BASE2 0xfefefefe addr 0xfefefef0 MEM
BASE3 0xfefefefe addr 0xfefefef0 MEM
BASE4 0xfefefefe addr 0xfefefef0 MEM
BASE5 0xfefefefe addr 0xfefefef0 MEM
BASEROM 0xfefefefe addr 0xfefe8000 not-decode-enabled
MAX_LAT 0xfe MIN_GNT 0xfe INT_PIN 0xfe INT_LINE 0xfe
pci bus 0x0 cardnum 0x16, vendor 0xfefe device 0xfeff
Device unknown
STATUS 0xfefe COMMAND 0xfefe
CLASS 0xfe 0xfe 0xfe REVISION 0xfe
BIST 0xfe HEADER 0xfe LATENCY 0xfe CACHE 0xfe
BASE0 0xfefefefe addr 0xfefefef0 MEM
BASE1 0xfefefefe addr 0xfefefef0 MEM
BASE2 0xfefefefe addr 0xfefefef0 MEM
BASE3 0xfefefefe addr 0xfefefef0 MEM
BASE4 0xfefefefe addr 0xfefefef0 MEM
BASE5 0xfefefefe addr 0xfefefef0 MEM
BASEROM 0xfefefefe addr 0xfefe8000 not-decode-enabled
MAX_LAT 0xfe MIN_GNT 0xfe INT_PIN 0xfe INT_LINE 0xfe
pci bus 0x0 cardnum 0x17, vendor 0xfefe device 0xfefe
Device unknown
STATUS 0xfefe COMMAND 0xfefe
CLASS 0xfe 0xfe 0xfe REVISION 0xfe
BIST 0xfe HEADER 0xfe LATENCY 0xfe CACHE 0xfe
BASE0 0xfefefefe addr 0xfefefef0 MEM
BASE1 0xfefefefe addr 0xfefefef0 MEM
BASE2 0xfefefefe addr 0xfefefef0 MEM
BASE3 0xfefefefe addr 0xfefefef0 MEM
BASE4 0xfefefefe addr 0xfefefef0 MEM
BASE5 0xfefefefe addr 0xfefefef0 MEM
BASEROM 0xfefefefe addr 0xfefe8000 not-decode-enabled
MAX_LAT 0xfe MIN_GNT 0xfe INT_PIN 0xfe INT_LINE 0xfe
pci bus 0x0 cardnum 0x18, vendor 0xfefe device 0xfeff
Device unknown
STATUS 0xfefe COMMAND 0xfefe
CLASS 0xfe 0xfe 0xfe REVISION 0xfe
BIST 0xfe HEADER 0xfe LATENCY 0xfe CACHE 0xfe
BASE0 0xfefefefe addr 0xfefefef0 MEM
BASE1 0xfefefefe addr 0xfefefef0 MEM
BASE2 0xfefefefe addr 0xfefefef0 MEM
BASE3 0xfefefefe addr 0xfefefef0 MEM
BASE4 0xfefefefe addr 0xfefefef0 MEM
BASE5 0xfefefefe addr 0xfefefef0 MEM
BASEROM 0xfefefefe addr 0xfefe8000 not-decode-enabled
MAX_LAT 0xfe MIN_GNT 0xfe INT_PIN 0xfe INT_LINE 0xfe
pci bus 0x0 cardnum 0x19, vendor 0xfefe device 0xfefe
Device unknown
STATUS 0xfefe COMMAND 0xfefe
CLASS 0xfe 0xfe 0xfe REVISION 0xfe
BIST 0xfe HEADER 0xfe LATENCY 0xfe CACHE 0xfe
BASE0 0xfefefefe addr 0xfefefef0 MEM
BASE1 0xfefefefe addr 0xfefefef0 MEM
BASE2 0xfefefefe addr 0xfefefef0 MEM
BASE3 0xfefefefe addr 0xfefefef0 MEM
BASE4 0xfefefefe addr 0xfefefef0 MEM
BASE5 0xfefefefe addr 0xfefefef0 MEM
BASEROM 0xfefefefe addr 0xfefe8000 not-decode-enabled
MAX_LAT 0xfe MIN_GNT 0xfe INT_PIN 0xfe INT_LINE 0xfe
pci bus 0x0 cardnum 0x1a, vendor 0xfefe device 0xfefe
Device unknown
STATUS 0xfeff COMMAND 0xfffe
CLASS 0xfe 0xfe 0xfe REVISION 0xfe
BIST 0xfe HEADER 0xfe LATENCY 0xfe CACHE 0xfe
BASE0 0xfefefefe addr 0xfefefef0 MEM
BASE1 0xfefefefe addr 0xfefefef0 MEM
BASE2 0xfefefefe addr 0xfefefef0 MEM
BASE3 0xfefefefe addr 0xfefefef0 MEM
BASE4 0xfefefefe addr 0xfefefef0 MEM
BASE5 0xfefefefe addr 0xfefefef0 MEM
BASEROM 0xfefefefe addr 0xfefe8000 not-decode-enabled
MAX_LAT 0xfe MIN_GNT 0xfe INT_PIN 0xfe INT_LINE 0xfe
pci bus 0x0 cardnum 0x1c, vendor 0xfefe device 0xfefe
Device unknown
STATUS 0xfefe COMMAND 0xfefe
CLASS 0xfe 0xfe 0xfe REVISION 0xfe
BIST 0xfe HEADER 0xfe LATENCY 0xfe CACHE 0xfe
BASE0 0xfefefefe addr 0xfefefef0 MEM
BASE1 0xfefefefe addr 0xfefefef0 MEM
BASE2 0xfefefefe addr 0xfefefef0 MEM
BASE3 0xfefefefe addr 0xfefefef0 MEM
BASE4 0xfefefefe addr 0xfefefef0 MEM
BASE5 0xfefefefe addr 0xfefefef0 MEM
BASEROM 0xfefefefe addr 0xfefe8000 not-decode-enabled
MAX_LAT 0xfe MIN_GNT 0xfe INT_PIN 0xfe INT_LINE 0xfe
pci bus 0x0 cardnum 0x1d, vendor 0xfefe device 0xfefe
Device unknown
STATUS 0xfefe COMMAND 0xfefe
CLASS 0xfe 0xfe 0xfe REVISION 0xfe
BIST 0xfe HEADER 0xfe LATENCY 0xfe CACHE 0xfe
BASE0 0xfefefefe addr 0xfefefef0 MEM
BASE1 0xfefefefe addr 0xfefefef0 MEM
BASE2 0xfefefefe addr 0xfefefef0 MEM
BASE3 0xfefefefe addr 0xfefefef0 MEM
BASE4 0xfefefefe addr 0xfefefef0 MEM
BASE5 0xfefefefe addr 0xfefefef0 MEM
BASEROM 0xfefefefe addr 0xfefe8000 not-decode-enabled
MAX_LAT 0xfe MIN_GNT 0xfe INT_PIN 0xfe INT_LINE 0xfe
pci bus 0x0 cardnum 0x1e, vendor 0xfefe device 0xfeff
Device unknown
STATUS 0xfefe COMMAND 0xfefe
CLASS 0xfe 0xfe 0xfe REVISION 0xfe
BIST 0xfe HEADER 0xfe LATENCY 0xfe CACHE 0xfe
BASE0 0xfefefefe addr 0xfefefef0 MEM
BASE1 0xfefefefe addr 0xfefefef0 MEM
BASE2 0xfefefefe addr 0xfefefef0 MEM
BASE3 0xfefefefe addr 0xfefefef0 MEM
BASE4 0xfefefefe addr 0xfefefef0 MEM
BASE5 0xfefefefe addr 0xfefefef0 MEM
BASEROM 0xfefefefe addr 0xfefe8000 not-decode-enabled
MAX_LAT 0xfe MIN_GNT 0xfe INT_PIN 0xfe INT_LINE 0xfe
pci bus 0x0 cardnum 0x1f, vendor 0xfefe device 0xfefe
Device unknown
STATUS 0xfefe COMMAND 0xfefe
CLASS 0xfe 0xfe 0xfe REVISION 0xfe
BIST 0xfe HEADER 0xfe LATENCY 0xfe CACHE 0xfe
BASE0 0xfefefefe addr 0xfefefef0 MEM
BASE1 0xfefefefe addr 0xfefefef0 MEM
BASE2 0xfefefefe addr 0xfefefef0 MEM
BASE3 0xfefefefe addr 0xfefefef0 MEM
BASE4 0xfefefefe addr 0xfefefef0 MEM
BASE5 0xfefefefe addr 0xfefefef0 MEM
BASEROM 0xfefefefe addr 0xfefe8000 not-decode-enabled
MAX_LAT 0xfe MIN_GNT 0xfe INT_PIN 0xfe INT_LINE 0xfe
PCI probing configuration type 2
pci bus 0x0 slot at 0xc000, vendor 0x8086 device 0x04a3
Intel 82434LX pci cache mem controller
STATUS 0xa400 COMMAND 0x0106
CLASS 0x06 0x00 0x00 REVISION 0x11
BIST 0x00 HEADER 0x00 LATENCY 0x20 CACHE 0x00
pci bus 0x0 slot at 0xc200, vendor 0x8086 device 0x0482
Intel 82375EB pci-eisa bridge
STATUS 0x0200 COMMAND 0x0007
CLASS 0x00 0x00 0x00 REVISION 0x04
BIST 0x00 HEADER 0x00 LATENCY 0xf8 CACHE 0x00
pci bus 0x0 slot at 0xc600, vendor 0x1022 device 0x2000
AMD 79C970 Lance
STATUS 0x0200 COMMAND 0x0185
CLASS 0x02 0x00 0x00 REVISION 0x02
BASE0 0x0000ff81 addr 0x0000ff80 I/O
MAX_LAT 0x00 MIN_GNT 0x00 INT_PIN 0x01 INT_LINE 0x09
pci bus 0x0 slot at 0xc700, vendor 0x1000 device 0x0001
NCR 53C810
STATUS 0x0200 COMMAND 0x0007
CLASS 0x00 0x00 0x00 REVISION 0x01
BIST 0x00 HEADER 0x00 LATENCY 0xf8 CACHE 0x00
BASE0 0x0000fc01 addr 0x0000fc00 I/O
BASE1 0xffbdff00 addr 0xffbdff00 MEM
MAX_LAT 0x00 MIN_GNT 0x00 INT_PIN 0x01 INT_LINE 0x0a
pci bus 0x0 slot at 0xc800, vendor 0x5333 device 0x8811
S3 Trio64
STATUS 0x0200 COMMAND 0x0003
CLASS 0x03 0x00 0x00 REVISION 0x00
BASE0 0xf3000000 addr 0xf3000000 MEM
BASEROM 0xffbe0000 addr 0xffbe0000 not-decode-enabled
MAX_LAT 0x00 MIN_GNT 0x00 INT_PIN 0x01 INT_LINE 0x0b
c) XF86Config
--------------
# This XF86Config file generated by the Xconfigurator
# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
# **********************************************************************
# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
#
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
EndSection
# **********************************************************************
# Server flags section.
# **********************************************************************
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
# NoTrapSignals
# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# DontZap
EndSection
# **********************************************************************
# Input devices
# **********************************************************************
# **********************************************************************
# Keyboard section
# **********************************************************************
Section "Keyboard"
Protocol "Standard"
# when using XQUEUE, comment out the above line, and uncomment the
# following line
# Protocol "Xqueue"
AutoRepeat 500 5
ServerNumLock
# Specifiy which keyboard LEDs can be user-controlled (eg, with xset(1))
# Xleds 1 2 3
# To set the LeftAlt to Meta, RightAlt key to ModeShift,
# RightCtl key to Compose, and ScrollLock key to ModeLock:
# LeftAlt Meta
# RightAlt ModeShift
# RightCtl Compose
# ScrollLock ModeLock
EndSection
# **********************************************************************
# Pointer section
# **********************************************************************
Section "Pointer"
Protocol "PS/2"
Device "/dev/mouse"
# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.
# Protocol "Xqueue"
# Baudrate and SampleRate are only for some Logitech mice
# BaudRate 9600
# SampleRate 150
# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Buttons
# ChordMiddle is an option for some 3-button Logitech mice
# ChordMiddle
# Some dual-protocol mice require DTR to be cleared to operate in
# MouseSystems mode.
# ClearDTR
# Some dual-protocol mice require RTS to be cleared to operate in
# MouseSystems mode.
# ClearRTS
EndSection
# **********************************************************************
# Graphics device section
# **********************************************************************
# Any number of graphics device sections may be present
Section "Device"
Identifier "Generic Video Card"
VendorName "Unknown"
BoardName "Unknown"
Chipset "mmio_928"
Ramdac "s3_trio64"
ClockChip "s3gendac"
VideoRam 1024
EndSection
# **********************************************************************
# Monitor section
# **********************************************************************
# Any number of monitor sections may be present
Section "Monitor"
Identifier "Generic Multisync"
VendorName "Unknown"
ModelName "Unknown"
Bandwidth 50
HorizSync 30-64
VertRefresh 50-100
ModeLine "640x480_2" 25.175 640 664 760 800 480 491 493 525
ModeLine "800x600_4" 40.000 800 848 1000 1056 600 605 607 633
ModeLine "800x600_5" 50.000 800 856 976 1040 600 637 643 666
+hsync +vsync
EndSection
# **********************************************************************
# Screen sections
# **********************************************************************
# The colour SVGA server
Section "Screen"
Driver "svga"
Device "Generic Video Card"
Monitor "Generic Multisync"
Subsection "Display"
Depth 8
Modes "640x480_2" "800x600_4" "800x600_5"
ViewPort 0 0
Virtual 1024 768
EndSubsection
EndSection
# The 16-colour VGA server
Section "Screen"
Driver "vga16"
Device "Generic Video Card"
Monitor "Generic Multisync"
Subsection "Display"
Modes "640x480_2" "800x600_4" "800x600_5"
ViewPort 0 0
Virtual 1024 768
EndSubsection
EndSection
# The Mono server
Section "Screen"
Driver "vga2"
Device "Generic Video Card"
Monitor "Generic Multisync"
Subsection "Display"
Modes "640x480_2" "800x600_4" "800x600_5"
ViewPort 0 0
Virtual 1024 768
EndSubsection
EndSection
# The accelerated servers (S3, Mach32, Mach8, 8514, P9000, AGX, W32)
Section "Screen"
Driver "accel"
Device "Generic Video Card"
Monitor "Generic Multisync"
Subsection "Display"
Depth 8
Modes "640x480_2" "800x600_4" "800x600_5"
ViewPort 0 0
Virtual 1024 768
EndSubsection
EndSection
d) Contents of /var/log/tmp/probe
----------------------------------
XFree86 Version 3.1.2 / X Window System
(protocol Version 11, revision 0, vendor release 6000)
Operating System: Linux
Configured drivers:
S3: accelerated server for S3 graphics adaptors (Patchlevel 0)
mmio_928, s3_generic
(using VT number 7)
XF86Config: /etc/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(**) Mouse: type: Microsoft, device: /dev/mouse, baudrate: 1200
(**) S3: Graphics device ID: "Generic"
(**) S3: Monitor ID: "Generic Monitor"
(--) S3: Mode "640x480" needs hsync freq of 37.86 kHz. Deleted.
(--) S3: Mode "640x480" needs hsync freq of 32.78 kHz. Deleted.
Warning: No FontPath specified, using compiled-in default.
(--) FontPath set to
"/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/
lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/font
s/100dpi/"
(--) S3: card type: PCI
(--) S3: chipset: Trio64 rev. 301
(--) S3: chipset driver: mmio_928
(--) S3: videoram: 1024k
(--) S3: for Trio32/64 chips you shouldn't specify a Clockchip
(--) S3: Ramdac type: s3_trio64
(--) S3: Ramdac speed: 135
(--) S3: Using Trio32/64 programmable clock (MCLK 57.273 MHz)
(--) S3: Maximum allowed dot-clock: 135.000 MHz
(**) S3: Mode "640x480": mode clock = 25.175
(--) S3: Using 6 bits per RGB value
(--) S3: Virtual resolution set to 640x480
3) Installed FreeBSD 4.3:
=========================
scanpci worked, XFree 3.6.x killed the box, even with the XF86Config
file that worked on Redhat Linux 3.0.3
a) Output of dmesg
--------------------
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.3-RELEASE #0: Sat Apr 21 10:54:49 GMT 2001
jkh@narf.osd.bsdi.com:/usr/src/sys/compile/GENERIC
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium/P54C (96.95-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x524 Stepping = 4
Features=0x7bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,APIC,oldMTRR>
real memory = 201326592 (196608K bytes)
avail memory = 191500288 (187012K bytes)
Preloaded elf kernel "kernel" at 0xc044d000.
Intel Pentium detected, installing workaround for F00F bug
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
isab0: <Intel 82375EB PCI-EISA bridge> at device 2.0 on pci0
eisa0: <EISA bus> on isab0
mainboard0: <ING2860 (System Board)> on eisa0 slot 0
isa0: <ISA bus> on isab0
lnc0: <PCNet/PCI Ethernet adapter> port 0xff80-0xff9f irq 9 at device 6.0 on
pci0
lnc0: PCnet-32 VL-Bus address 08:00:36:30:75:02
lnc0: driver is using old-style compatibility shims
ncr0: <ncr 53c810 fast10 scsi> port 0xfc00-0xfcff mem 0xffbdff00-0xffbdffff
irq 10 at device 7.0 on pci0
pci0: <S3 Trio graphics accelerator> at 8.0 irq 11
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse Explorer, device ID 4
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
Waiting 15 seconds for SCSI devices to settle
Mounting root from ufs:/dev/da1s1a
da0 at ncr0 bus 0 target 0 lun 0
da0: <IBM DPES-31080 S31Q> Fixed Direct Access SCSI-2 device
da0: 10.000MB/s transfers (10.000MHz, offset 8), Tagged Queueing Enabled
da0: 1034MB (2118144 512 byte sectors: 255H 63S/T 131C)
da1 at ncr0 bus 0 target 1 lun 0
da1: <IBM DPES-31080 S31Q> Fixed Direct Access SCSI-2 device
da1: 10.000MB/s transfers (10.000MHz, offset 8), Tagged Queueing Enabled
da1: 1034MB (2118144 512 byte sectors: 255H 63S/T 131C)
cd0 at ncr0 bus 0 target 2 lun 0
cd0: <TOSHIBA CD-ROM XM-4101TA 1084> Removable CD-ROM SCSI-2 device
cd0: 4.237MB/s transfers (4.237MHz, offset 8)
cd0: cd present [329304 x 2048 byte records]
b) Output of pciconf
---------------------
chip0@pci0:0:0: class=0x060000 card=0x00000000 chip=0x04a38086 rev=0x11
hdr=0x00
isab0@pci0:2:0: class=0x000000 card=0x00000000 chip=0x04828086 rev=0x04
hdr=0x00
lnc0@pci0:6:0: class=0x020000 card=0x00000000 chip=0x20001022 rev=0x02
hdr=0x00
ncr0@pci0:7:0: class=0x000000 card=0x00000000 chip=0x00011000 rev=0x01
hdr=0x00
none0@pci0:8:0: class=0x030000 card=0x00000000 chip=0x88115333 rev=0x00
hdr=0x00
c) Output of scanpci -v2
------------------------
PCI says configuration type 2
PCI probing configuration type 2
pci bus 0x0 slot at 0xc000, vendor 0x8086 device 0x04a3
Intel 82434LX/NX pci cache mem controller
CardVendor 0x0000 card 0x0000
STATUS 0xa400 COMMAND 0x0106
CLASS 0x06 0x00 0x00 REVISION 0x11
HEADER 0x00 LATENCY 0x20
pci bus 0x0 slot at 0xc200, vendor 0x8086 device 0x0482
Intel 82375EB pci-eisa bridge
CardVendor 0x0000 card 0x0000
STATUS 0x0200 COMMAND 0x0007
CLASS 0x00 0x00 0x00 REVISION 0x04
BIST 0x00 HEADER 0x00 LATENCY 0xf8 CACHE 0x00
BYTE_0 0x60 BYTE_1 0x98 BYTE_2 0x03 BYTE_3 0x00
pci bus 0x0 slot at 0xc600, vendor 0x1022 device 0x2000
AMD 79C970 Lance
CardVendor 0x0000 card 0x0000
STATUS 0x0200 COMMAND 0x0185
CLASS 0x02 0x00 0x00 REVISION 0x02
BASE0 0x0000ff81 addr 0x0000ff80 I/O
MAX_LAT 0x00 MIN_GNT 0x00 INT_PIN 0x01 INT_LINE 0x09
pci bus 0x0 slot at 0xc700, vendor 0x1000 device 0x0001
NCR 53C810
CardVendor 0x0000 card 0x0000
STATUS 0x0200 COMMAND 0x0007
CLASS 0x00 0x00 0x00 REVISION 0x01
BIST 0x00 HEADER 0x00 LATENCY 0xf8 CACHE 0x00
BASE0 0x0000fc01 addr 0x0000fc00 I/O
BASE1 0xffbdff00 addr 0xffbdff00 MEM
MAX_LAT 0x00 MIN_GNT 0x00 INT_PIN 0x01 INT_LINE 0x0a
pci bus 0x0 slot at 0xc800, vendor 0x5333 device 0x8811
S3 Trio32/64
CardVendor 0x0000 card 0x0000
STATUS 0x0200 COMMAND 0x0003
CLASS 0x03 0x00 0x00 REVISION 0x00
BASE0 0xff000000 addr 0xff000000 MEM
BASEROM 0xffbe0000 addr 0xffbe0000 not-decode-enabled
MAX_LAT 0x00 MIN_GNT 0x00 INT_PIN 0x01 INT_LINE 0x0b
That's all I've got.
Cheers,
Stefan
help
Want to link to this message? Use this
URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200303301930.h2UJUD9W080837>