Date: Thu, 06 May 2010 09:58:50 -0700 From: Sean Bruno <seanbru@yahoo-inc.com> To: "ulf@alameda.net" <ulf@alameda.net> Cc: "freebsd-scsi@freebsd.org" <freebsd-scsi@freebsd.org> Subject: Re: kern/146287: [ciss] ciss(4) cannot see more than one SmartArray controller Message-ID: <1273165130.2465.4.camel@localhost.localdomain> In-Reply-To: <20100506014748.GR30353@evil.alameda.net> References: <4BE06F10.5080904@intersonic.se> <32244F4E-DAF3-4CC0-B178-32B30076A0D5@samsco.org> <4BE083B8.6070402@intersonic.se> <20100505155946.GL30353@evil.alameda.net> <F4B88810-2F17-4902-8325-432B4FC08F8E@samsco.org> <20100505184455.GN30353@evil.alameda.net> <1273087076.2487.4.camel@localhost.localdomain> <20100505203116.GP30353@evil.alameda.net> <20100505204652.GQ30353@evil.alameda.net> <1273092737.2487.5.camel@localhost.localdomain> <20100506014748.GR30353@evil.alameda.net>
next in thread | previous in thread | raw e-mail | index | archive | help
On Wed, 2010-05-05 at 18:47 -0700, Ulf Zimmermann wrote: > > > Ok, found a machine and hooked it up. DL380 g4, has single port Qlogic Fibre > > > channel HBA in slot 1 and 2 right now. What version should I install? 8-REL? > > > Current? > > > > > > > Current if you please. > > > > sean > > Turns out the iLO on the system I first grabbed is busted, so I grabbed > another one. DL380 g4 with SmartArray P600 in slot 2 (middle) and a LSI > 1030 based U320 controller in slot 3 (top). Both show up on -CURRENT: > > ciss0: <HP Smart Array 6i> port 0x4000-0x40ff mem 0xfdef0000-0xfdef1fff,0xfde80000-0xfdebffff irq 51 at device 3.0 on pci4 > ciss0: PERFORMANT Transport > ciss0: got 0 MSI messages] > ciss0: [ITHREAD] > ciss1: <HP Smart Array P600> port 0x5400-0x54ff mem 0xfdfb0000-0xfdfb1fff,0xfdf40000-0xfdf7ffff irq 78 at device 2.0 on pci6 > ciss1: PERFORMANT Transport > ciss1: got 0 MSI messages] > ciss1: [ITHREAD] > da0 at ciss0 bus 0 scbus0 target 0 lun 0 > mpt0: <LSILogic 1030 Ultra4 Adapter> port 0x5000-0x50ff mem 0xfdfe0000-0xfdffffff,0xfdfc0000-0xfdfdffff irq 74 at device 1.0 on pci6 > > > So putting a card into the slot that failed on the previous machine works now? Madness. Can you check that both machines are running the same BIOS rev and then dump the dmesg+pciconf of the "new" machine here as well? Sean
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1273165130.2465.4.camel>