Date: Thu, 14 Jun 2007 07:35:19 -0500 From: "eculp@argosteve.com" <eculp@argosteve.com> To: freebsd-stable@freebsd.org Subject: Re: atapicam and cd-rw problem, no cd0 but acd0 some error Message-ID: <20070614073519.fhyyh35ztw8swssk@correo.argosteve.com> In-Reply-To: <1181817741.1212.3.camel@localhost> References: <200706132034.22794.idiotbg@gmail.com> <1181817741.1212.3.camel@localhost>
next in thread | previous in thread | raw e-mail | index | archive | help
Quoting Tom Evans <tevans.uk@googlemail.com>: > On Wed, 2007-06-13 at 20:34 +0200, Momchil Ivanov wrote: >> Hi guys, >> >> I am running 6-STABLE as of today and I cannot use the CD-RW on my >> IBM T40 to >> burn CDs. When I put atapicam_load=3D"YES" in loader.conf or compile it i= n the >> kernel I see the following error >> acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=3D0x24 ascq=3D0x00 sks=3D0x40 >> 0x00 0x01 >> and no /dev/cd0 is created. I don`t see the above error without atapicam >> loaded or in kernel. This is not something new, I haven`t been able to >> get /dev/cd0 since more than a month following 6-STABLE, don`t know if it >> ever worked on 6 or 6.x, but I certainly cannot get it to work on 6-STABL= E. >> Any help would be appreciated :) I would be happy ot be able to burn CDs. >> >> I have acd0: CDRW <TOSHIBA DVD-ROM SD-R9012/1121> at ata1-master UDMA33 >> and camcontrol shows: >> <TOSHIBA DVD-ROM SD-R9012 1121> at scbus2 target 0 lun 0 (pass1) >> >> Thanks >> > > The error message is benign - the controller tries to send a command to > the device, the device doesn't support it, so you get the error message. > That's all, everything else should work. > > Do you load or compile into your kernel > =09device scbus > =09device cd > =09device atapicam > > atapicam allows you to access ATAPI devices through the SCSI subsystem, > so you must ensure that you have a SCSI subsystem to access them > through. > > Cheers > > Tom Hi Tom, I am getting a very similar error with my sony cdrom: Jun 14 07:12:36 HOME kernel: acd0: FAILURE - INQUIRY ILLEGAL REQUEST =20 asc=3D0x24 ascq=3D0x00 Jun 14 07:12:36 HOME kernel: (probe0:ata1:0:1:0): error 22 Jun 14 07:12:36 HOME kernel: (probe0:ata1:0:1:0): Unretryable Error Jun 14 07:12:36 HOME kernel: pass0 at ata1 bus 0 target 1 lun 0 Jun 14 07:12:36 HOME kernel: pass0: <SONY CD-RW CRX230ED 4YS1> =20 Removable CD-ROM SCSI-0 device Jun 14 07:12:36 HOME kernel: pass0: 33.000MB/s transfers Jun 14 07:12:36 HOME kernel: GEOM: new disk cd0 Jun 14 07:12:36 HOME kernel: (cd0:ata1:0:1:0): error 6 Jun 14 07:12:36 HOME kernel: (cd0:ata1:0:1:0): Unretryable Error Jun 14 07:12:36 HOME kernel: cd0 at ata1 bus 0 target 1 lun 0 Jun 14 07:12:36 HOME kernel: cd0: <SONY CD-RW CRX230ED 4YS1> =20 Removable CD-ROM SCSI-0 device Jun 14 07:12:36 HOME kernel: cd0: 33.000MB/s transfers Jun 14 07:12:36 HOME kernel: cd0: Attempt to query device size failed: =20 NOT READY, Medium not present Jun 14 07:12:36 HOME kernel: (cd0:ata1:0:1:0): error 6 Jun 14 07:12:36 HOME kernel: (cd0:ata1:0:1:0): Unretryable Error Jun 14 07:12:36 HOME kernel: (cd0:ata1:0:1:0): error 6 Jun 14 07:12:36 HOME kernel: (cd0:ata1:0:1:0): Unretryable Error Jun 14 07:12:36 HOME kernel: (cd0:ata1:0:1:0): error 6 Jun 14 07:12:36 HOME kernel: (cd0:ata1:0:1:0): Unretryable Error There was a good cd in the burner when booting. the unfortunate part is that in this case, it doesn't seem to be =20 benign because I can't mount any cd nor can I use burncd or k3b. Any suggestions appreciated. IIRC, I can use burncd if I remove scsi suppor= t. Thanks, ed
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20070614073519.fhyyh35ztw8swssk>