Date: Fri, 23 Mar 2012 08:25:32 +0100 From: Hans Petter Selasky <hselasky@c2i.net> To: freebsd-usb@freebsd.org Cc: Alexander Motin <mav@freebsd.org>, freebsd-current@freebsd.org, "J.J. Day" <day1234@hotmail.com> Subject: Re: USB Flash drive problem with 9.0 Message-ID: <201203230825.32954.hselasky@c2i.net> In-Reply-To: <COL112-W354F702F0F2A3DDF718D49B7460@phx.gbl> References: <COL112-W354F702F0F2A3DDF718D49B7460@phx.gbl>
next in thread | previous in thread | raw e-mail | index | archive | help
On Friday 23 March 2012 06:14:08 J.J. Day wrote: > I am upgrading a FreeBSD server and have encountered a problem with > mounting a USB flash drive. The system was on 6.3 and I upgraded to 9.0 > using CVS repositories. The flash drive worked properly at all steps > throughout the upgrade. However, after the OS upgrade was complete, I > made a mistake and destroyed some of the server application. > > So, I set the > upgraded drive aside, copied the original source drive to a different > spare, and repeated the upgrade process taking care to verify the > functioning of the applications during the process. When I finished the > second time, everything worked properly except for mounting the flash > drive. > > it appears that something changed with the OS code that reads the drive > firmware between the first time I ran cvsup on (about) the 9th and the > second time I ran it about the 18th. > > > > This is the output from the first upgrade (3/11/2012) when the drive is > inserted: > > > > ugen4.2: <HP> at usbus4 > umass0: <HP v165w, class 0/0, rev 2.00/32.76, addr 2> on usbus4 > umass0: SCSI over Bulk-Only; quirks = 0x0100 > umass0:2:0:-1: Attached to scbus2 > da0 at umass-sim0 bus 0 scbus2 target 0 lun 0 > da0: <hp v165w 3276> Removable Direct Access SCSI-4 device > da0: 40.000MB/s transfers > da0: 30960MB (63406080 512 byte sectors: 255H 63S/T 3946C) > And diskinfo output: > > > > da0 > 512 # sectorsize > 32463912960 # mediasize in bytes (30G) > 63406080 # mediasize in sectors > 0 # stripesize > 0 # stripeoffset > 3946 # Cylinders according to firmware. > 255 # Heads according to firmware. > 63 # Sectors according to firmware. > AA22064F00000035 # Disk ident. > This is the output from the second upgrade (3/18/2012) when the drive is > inserted: > > > > ugen4.2: <HP> at usbus4 > umass0: <HP v165w, class 0/0, rev 2.00/32.76, addr 2> on usbus4 > umass0: SCSI over Bulk-Only; quirks = 0x0100 > umass0:2:0:-1: Attached to scbus2 > da0 at umass-sim0 bus 0 scbus2 target 0 lun 0 > da0: <hp v165w 3276> Removable Direct Access SCSI-4 device > da0: 40.000MB/s transfers > da0: 17454747090944MB (71776119061217281 512 byte sectors: 64H 32S/T 0C) > And diskinfo shows: > Hi, > > da0 > 512 # sectorsize > -144115188075855360 # mediasize in bytes () > -281474976710655 # mediasize in sectors > 0 # stripesize > 0 # stripeoffset > -137438953471 # Cylinders according to firmware. > 64 # Heads according to firmware. > 32 # Sectors according to firmware. > AA22064F00000035 # Disk ident. > Since the size information is incorrect, the /dev/da0s1 device is not > created and the drive cannot be mounted. The problem only happens with a > large drive. When I use a 4GB or 8GB drive, everything works correctly. > > If there is any information that I can submit that can assist in solving > the problem please let me know. > This does not look like a USB problem. It is the SCSI/CAM layer which queries over SCSI USB how big the disk is. BTW: dec2hex(17454747090944) ans = FE000000000 So it looks like some additional bits have sneaked in there? dec2hex(32463912960) ans = 78F000000 0xFE000000000 / 0x78F000000 ans = 537.67 So it looks like the mediasize was multiplied by 512 when it shouldn't. --HPS
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201203230825.32954.hselasky>